Refer to the exhibit. A client has asked you to consult on an eBGP loading question. Currently the AS 100 eBGP links have an average outbound load of 65% and 20% respectively. On further investigation, traffic from 10.10.24.0 accounts for 45%, and 10.10.2
题目
Refer to the exhibit. A client has asked you to consult on an eBGP loading question. Currently the AS 100 eBGP links have an average outbound load of 65% and 20% respectively. On further investigation, traffic from 10.10.24.0 accounts for 45%, and 10.10.25.0 and 10.10.32.0 accounts for 20% each of the outbound load. The customer wants to spread the load between the two eBGP links more evenly. The BGP attributes are currently set at their default values. If you are located at AS 100 and want to influence how AS 100 sends traffic to AS 200, what BGP attribute could you configure to cause AS 100 outbound traffic to load the eB GP links more evenly? （）
A. On router A, set the default local - preference to 50.
B. On router B, set the default metric to 150.
C. On router B, configure a route map for 10.10.25.0/24 with a local preference of 150 linked to neighbor 192.168.30.2.
D. On router B, set the default local -preference to 150.
相似考题
更多“Refer to the exhibit. A client has asked you to consult on an eBGP loading question. Curre ”相关问题
-
第1题：
Refer to the exhibit. Router RTA has been configured as a DHCP server. The two debug commands will generate output on RTA when Ho st A requests an IP address. Which set of DHCPD debug messages is in the correct sequence?（）
A.DHCPD: Sending DHCPOFFER to client DHCPD: DHCPDISCOVER received from client DHCPD: DHCPREQUEST received from client DHCPD: Sending DHCPACK to client
B.DH CPD: DHCPDISCOVER received from client DHCPD: DHCPREQUEST received from client DHCPD: Sending DHCPOFFER to client DHCPD: Sending DHCPACK to client
C.DHCPD: DHCPDISCOVER received from client DHCPD: Sending DHCPOFFER to client DHCPD: DHCPREQUEST received from client DHCPD: Sending DHCPACK to client
D.DHCPD: DHCPREQUEST received from client DHCPD: Sending DHCPOFFER to client DHCPD: DHCPDISCOVER received from client DHCPD: Sending DHCPACK to client
E.DHCPD: Sending DHCPACK to client DHCPD: DHCPD ISCOVER received from client DHCPD: Sending DHCPOFFER to client DHCPD: DHCPREQUEST received from client
F.DHCPD: DHCPDISCOVER received from client DHCPD: Sending DHCPACK to client DHCPD: Sending DHCPOFFER to client DHCPD: DHCPREQUEST received from client
参考答案：C
-
第2题：
Refer to the exhibit. R1 accesses the Internet using E0/0. You have been asked to co nfigure R1 so that a default route is generated to its downstream devices (191.0.0.1 and 192.0.0.1). Which commands would create this configuration? （）
A.router eigrp 190redistribute static ! ip route 0.0.0.0 0.0.0.0 Null0
B.ip default - network 2 0.0.0.0
C.router eigrp 190 redistribute static ! ip route 0.0.0.0 255.255.255.255 Null0
D.ip default - network 20.20.20.0
参考答案：A
-
第3题：
Refer to the exhibit. OSPF is running throughout the network. You want to minimize the propagation of LSAs into and out of A rea 1. Which OSPF feature would best achieve this goal? ()
A. stub
B. totally stubby
C. NSSA
D. totally NSSA
参考答案：D
-
第4题：
Refer to the exhibit. ROUTE.com has just implemented this EIGRP network. A network administrator came to you for advice while trying to implement load balancing across part of their EIGRP network. If the variance value is configured as 2 on all routers and all o ther metric and K values are configured to their default values, traffic from the Internet to the data center will be load balanced across how many paths? （）
A. 1
B. 2
C. 3
D. 4
E. 5
参考答案：C
-
第5题：
Refer to the exhibit. Which two statements are true about the partial configuration that is provided.()
A. The peer group shortens the EBGP configuration
B. The peer group shortens the IBGP configuration
C. All the configured neighbors are in autonomous system 100
D. Three AS - path filters are applied to each BGP neighbor
E. Only the outgoing filters are applied to BGP updates
参考答案：B, C
-
第6题：
Refer to the exhibit. Why has this switch not been elected the root bridge for VLAN1?()
A.It has more than one interface that is connected to the root network segment.
B.It is running RSTP while the elected root bridge is running 802.1d spanning tree.
C.It has a higher MAC address than the elected root bridge.
D.It has a higher bridge ID than the elected root bridge.
参考答案：D
-
第7题：
Mary has just called and asked__to have lunch with her tomorrow.A.you and I
B.you and me
C.I and you
D.me and you答案：B解析：作ask的宾语需用宾格me。 -
第8题：
You have a single Active Directory directory service domain. You use a Group Policy object （GPO） to apply security settings to your client computers. You configure the startup type for system services settings in a new GPO， and you link the GPO to an organizational unit （OU）. You discover that the startup type for system services on one of the client computers has not been updated. You need to ensure that the Group Policy settings are applied to the client computer. What should you do？（）
- A、 Restart the client computer.
- B、 Instruct the user to log off and then log on to the client computer.
- C、 On the client computer， run the Gpupdate.exe command with the /Force parameter.
- D、 On the client computer， run the Gpupdate.exe command with the /Target：computer parameter.
正确答案:A -
第9题：
单选题Refer to the exhibit. Given the output for this command, if the router ID has not been manually set, what router ID will OSPF use for this RouterD?（）A10.1.1.2
B10.154.154.1
C172.16.5.1
D192.168.5.3
正确答案： B解析： 暂无解析 -
第10题：
单选题Refer to the exhibit. A Cisco Aironet Wireless LAN Client Adapter has been installed and configured through the ADU on the PC. The Aironet System Tray Utility （ASTU） has been enabled during the installation and the icon appears in the system tray area in the lower right of the desktop. What is the significance of the icon？（）AIt indicates that the radio of the client adapter is disabled.
BIt indicates that the client adapter is not associated to an access point or another client.
CIt indicates that the client adapter is associated to an access point or another client， but the user is not EAP authenticated.
DIt indicates that the client adapter is associated to an access point or another client， that the user is authenticated if the client adapter is configured for EAP authentication， and that the signal strength is excellent or good.
EIt indicates that the client adapter is associated to an access point or another client， that the user is authenticated if the client adapter is configured for EAP authentication， and that the signal strength is fair.
FIt indicates that the client adapter is associated to an access point or another client， that the user is authenticated if the client adapter is configured for EAP authentication， and that the signal strength is poor.
正确答案： F解析： 暂无解析 -
第11题：
单选题What would you consult to determine the number of persons required on duty while loading a cargo of leaded gasoline on your tanker? （）Athe Matitime Code of China
BCertificate of Inspection
COil Transfer Procedures Manual
DIOPP Certificate
正确答案： D解析： 暂无解析 -
第12题：
问答题Practice 8 ● You are the Director of the Human Resources Department. The CEO has asked you to prepare a proposal on how to turn classroom training into workplace learning for the management discussion. ● Write the proposal explaining how to turn the classroom training into workplace learning. ● In your proposal, you need to: ● refer to the importance of turning professional training into workplace learning, ● summarize the key factors in effective learning cycle such as goals, practice, and application, etc. ● Write 200-250 words on the separate answer paper provided.正确答案： 【参考范文】
To: Mr. Mark Hudson, CEO
From: Paul Christina, Director of the Human Resources Department
Date: May 28, 2012
Proposal on how to turn classroom training into workplace learning As requested by the CEO, I am submitting this report to the management for consideration. The purpose of this report is to summarize the key factors in making effective learning cycle.
Our company will provide overall training programmes, aiming at improving staff’s performance. However, classroom training does not always turn into valuable learning. As everyone knows, we can acquire much of the knowledge needed for effective job performance through practical experience, instead of from specific training programmes. Based on the statistics, it is unlikely that trainees on a typical corporate training programme apply more than 3 per cent of what they have learnt to their work. Most people cannot remember at least 10 per cent of what they have learned within a week of receiving training.
How do we ensure that professional training work for the employees, administrative staff and company alike? As far as I am concerned, the following key factors need to be taken into account:
Objectives: Trainees should have clear objectives. When trainees have clear objectives to achieve in all training programmes they are more likely to learn effectively and gain the competences they need.
Practice: Trainees should have the chance to experiment with different ways of doing things, observe how others do their jobs, try new skills and get specific feedback on their performance.
Application: Trainees should be capable of applying what they have learned to real work situations and evaluate the consequences, according to the insights they have acquired in the goal-setting and training.
Attitude: Employees should adopt a positive and mature approach, with practical expectations about what the training programmes can achieve. The employees should be instructed to realize the long-term value of training and motivated to take ownership of the learning process.解析： 暂无解析 -
第13题：
Refer to the exhibit. Currently the two eBGP links between AS100 and AS200 have an average inbound load of 65% and 20% respectively. After further investigation, traffic to 10.10.1.16/28 accounts for 45%, and t raffic to 10.10.1.32/28 and to 10.10.1.48/28 each account for 20% of the inbound load. The BGP attributes are currently set at their default values in both autonomous systems. If you want to influence how AS200 sends traffic to AS100, which eBGP configu rations would you configure in AS100 to influence AS200 to use the eBGP links more evenly?（）
A. neighbor 192.168.30.2 route - map as_50 out
B. neighbor 192.168.20.2 route - map as_50 out
C. route - map as_50 permit 10 match ip address 50 set metric 150 a ccess - list 50 permit 10.10.1.16 0.0.0.240
D. route - map as_50 permit 10 match ip address 50 set metric 150 access - list 50 permit 10.10.1.32 0.0.0.240
参考答案：B, C
-
第14题：
Refer to the exhibit. You want to use all the routes in the EIGRP topology for IP load balancing. Which two EIGRP subcommands wou ld you use to accomplish this goal?()
A. traffic - share balanced
B. distance
C. maximum- paths
D. default - network
E. variance
参考答案：C, E
-
第15题：
Refer to the exhibit. You have completed an OSPF implementation, and you are verifying OSPF operation. You notice that router A and router B are stuck in the two - way state. From the show ip ospf interface command output, what is the cause of this issue?（）
A. All OSPF implementations must have at le ast one interface in area 0.
B. You are attempting to run in the broadcast mode over an NBMA interface.
C. Both routers are configured to function as a BDR; therefore, there is no DR router.
D. Someone has changed the OSPF router ID; therefore you must clear the OSPF process.
E. The OSPF priority is set to 0 on both routers; therefore neither can become the DR.
参考答案：E
-
第16题：
Refer to the exhibit. What three statements are true about the IS － IS configuration?()
A.The router is in area 49.0001.0002
B.The router acts as a Level 1 - 2 router
C.CLNS routing is enable d for the router
D.The router has a system ID of 0003.0004
E.The interfaces have a functional IS - IS configuration
F.The network service access point selector (NSEL) byte has a value of 0
参考答案：B, E, F
-
第17题：
Refer to the exhibit. Which st atement is true?()
A. Router RTA is the BDR
B. Router RTA is directly connected to interface 192.168.45.1
C. Neighbor 192.168.45.1 has changed its OSPF priority number
D. Router RTA and neighbor 192.168.45.2 are exchanging OSPF LSAs
参考答案：A
-
第18题：
To determine which grades of cargo a tank vessel is permitted to carry you should ______.
A.refer to the vessel's Certificate of Inspection
B.examine the cargo tanks and fittings
C.ask the terminal supervisor or his representative
D.check the loading order
正确答案：A
-
第19题：
A small company that is considering a Cisco converged network solution has asked whether you recommend the Cisco 2800 or 3800 Series Integrated Services Routers. Which two resources would you consult to determine the appropriate product？ （）
- A、 Cisco Partner Consultative Support
- B、 Network Availability Improvement Support
- C、 Cisco.com
- D、 Cisco Focused Technical Support
正确答案:A,C -
第20题：
A Windows Communication Foundation (WCF) service has a callback contract. You are developing a client application that will call this service.You must ensure that the client application can interact with the WCF service. What should you do?（）
- A、On the OperationContractAttribute, set the AsyncPattern property value to true.
- B、On the OperationContractAttribute, set the ReplyAction property value to the endpoint address of the client.
- C、On the client, create a proxy derived from DuplexClientBase<TChannel >.
- D、On the client, use GetCallbackChannel<T >.
正确答案:C -
第21题：
单选题Refer to the exhibit. A Cisco Aironet Wireless LAN Client Adapter has been installed and configured through the ADU on the PC. The Aironet System Tray Utility （ASTU） has been enabled during the installation and the icon appears in the system tray area in the lower right of the desktop. What is thesignificance of the icon？（）AIt indicates that the radio of the client adapter is disabled
BIt indicates that the client adapter is not associated to an access point or another client
CIt indicates that the client adapter is associated to an access point or another client， but the user is not EAP authenticated
DIt indicates that the client adapter is associated to an access point or another client， that the user is authenticated if the client adapter is configured for EAP authentication， and that the signal strength is excellent or good
EIt indicates that the client adapter is associated to an access point or another client， that the user is authenticated if the client adapter is configured for EAP authentication， and that the signal strength is fair
FIt indicates that the client adapter is associated to an access point or another client， that the user is authenticated if the client adapter is configured for EAP authentication， and that the signal strength is poor
正确答案： F解析： 暂无解析 -
第22题：
单选题Your company has 1，000 client computers. Each client computer has 1 GB of RAM. You are planning to deploy Windows 7 Enterprise. You need to design a zero-touch deployment strategy to increase the number of client computers that can be imaged at one time. What should you do？（）AIncrease the amount of RAM on the client computers.
BChange from unicast to multicast deployment of images.
CChange from multicast to unicast deployment of images.
DDecrease the trivial file transfer protocol （TFTP） block size on the TFTP server.
正确答案： B解析： 暂无解析 -
第23题：
单选题A Windows Communication Foundation (WCF) service has a callback contract. You are developing a client application that will call this service.You must ensure that the client application can interact with the WCF service. What should you do?（）AOn the OperationContractAttribute, set the AsyncPattern property value to true.
BOn the OperationContractAttribute, set the ReplyAction property value to the endpoint address of the client.
COn the client, create a proxy derived from DuplexClientBase<TChannel >.
DOn the client, use GetCallbackChannel<T >.
正确答案： D解析： 暂无解析