Refer to the exhibit. The company uses EIGRP as the routing protocol. What path will packets take from a host on 192.168.10.192／26 network to a host on the LAN attached to router R1?()A.The path of the packets will be R3 to R2 to R1.B.The path of the pack

题目
Refer to the exhibit. The company uses EIGRP as the routing protocol. What path will packets take from a host on 192.168.10.192／26 network to a host on the LAN attached to router R1?()

A.The path of the packets will be R3 to R2 to R1.

B.The path of the packets will be R3 to R1 to R2.

C.The path of the packets will be both R3 to R2 to R1 and R3 to R1.

D.The path of the packets will be R3 to R1

相似考题

1.Router VE1 has just received a packet and needs to route it. What two actions must this router take in order to route incoming packets? (Choose two)A. Inspect the routing table to select the best path to the destination network addresses.B. Validate sources of routing information.C. Inspect the ARP table to verify a legitimate source MAC address for each packet.D. Identify the destination network address of each packet.E. Verify the receipt of routed packets by the next hop router.F. Identify the source network address of each packet.

2.Refer to the exhibit. Routers R1 and R2 have established a neighbor relationship and are exchanging routing information. The network design requires that R1 r eceive routing updates from R2, but not advertise any routes to R2. Which configuration command sequence will successfully accomplish this task? （）A. R1(config)# router eigrp 1 R1(config - router)# passive - interface serial 0B. R1(config)# access - list 2 0 deny any R1(config)# router eigrp 1 R1(config - router)# distribute - list 20 out serial 0C. R2(config)# access - list 20 permit any R2(config)# router eigrp 1 R2(config - router)# distribute - list 20 in serial 0D. R1(config)# access - list 20 permit any R 1(config)# router eigrp 1 R1(config - router)# distribute - list 20 in serial 0E. R2(config)# access - list 20 deny any R2(config)# router eigrp 1 R2(config - router)# distribute - list 20 out serial 0F. R2(config)# router eigrp 1 R2(config - router)# passive - interface serial 0

3.Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）A. Network BB. Network A and Network BC. Network AD. neither Network A nor Network B

4.What are two examples of RE exception traffic?()A. BGP updates that travel through the local router and are destined for a remote router.B. OSPF hello packets that are sent from a remote router and are destined for the local router.C. Telnet traffic that is sent from a remote host and is destined for the local router.D. Telnet traffic that travels through the local router and is destined for a remote end host.

更多“Refer to the exhibit. The company uses EIGRP as the routing protocol. What path will packets take from a host on 192.168.10.192／26 network to a host on the LAN attached to router R1?() ”相关问题

  • 第1题：

    Refer to the exhibit. R1 and R2 have been configured to share routing information via EIGRP. What will be the result of the configuration section shown for R2? ()

    A. Any routes learned by R2 from the interface tied to the 172.16.0.0 network will not be advertised to neighbors on the 192.168.2.0 network.

    B. Only routes learned by R2 from the interface tied to the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network.

    C. Only the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network.

    D. All networks, except the 172.16.0.0 network will be advertised to neighbors on the 192.168.2.0 network .


    参考答案：C

  • 第2题：

    Refer to the exhibit. EIGRP has been configured on al l routers in the network. The command metric weights 0 0 1 0 0 has been added to the EIGRP process so that only the delay metric is used in the path calculations. Which router will R1 select as the successor and feasible successor for Network A?（）

    A. R 4 becomes the successor for Network A and will be placed in the routing table. R2 becomes the feasible successor for Network A

    B. R4 becomes the successor for Network A and will be included in the routing table. No feasible successor will be selected a s the advertised distance from R2 is higher than the feasible distance

    C. R2 becomes the successor and will be placed in the routing table. R4 becomes the feasible successor for Network A

    D. R2 becomes the successor and will be placed in the routing t able. No feasible successor will be selected as the reported distance from R4 is lower than the feasible distance


    参考答案：B

  • 第3题：

    Refer to the exhibit. A partial routing configuration is shown. Complete the configuration so that only the default - network is redistributed from EIGRP 190 into EIGRP 212. Which ACL statement completes the configuration correctly? （）

    A. access - list 100 permit ip 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0 .0

    B. access - list 100 permit ip host 0.0.0.0 any

    C. access - list 100 permit ip any host 0.0.0.0

    D. A default -network cannot be redistributed between routing processes.


    参考答案：C

  • 第4题：

    Refer to the exhibit. Routing updates for the 192.168.1.0 network are being received from all three neighbors. Which statement is correct regarding the result of the con figuration shown? ()

    A. The router will prefer the next hop of 172.16.1.1 for packets destined for the 192.168.1.0 network.

    B. The router will prefer the next hop of 172.26.1.1 for packets destined for the 192.168.1.0 network.

    C. The router will adve rtise the 192.168.1.0 network only to 172.30.1.1.

    D. The router will advertise the 192.168.1.0 network only to 172.26.1.1.

    E. The router will prefer the next hop of 172.26.1.1 for packets except those destined for the 192.168.1.0 network.


    参考答案：B

  • 第5题：

    Refer to the exhibit. EIGRP is configured on all routers in the network. On a basis of the show ip eigrp topology output provided, what conclusion can be deri ved? ()

    A.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out inquiring for a second successor to network 10.6.1.0/24

    B.Router R1 can send traffic destined for network 10.6.1.0/24 out of interface FastEthernet0/0

    C.Router R1 is waiting for a reply from the neighbor 10.1.2.1 to the hello message sent out before it declares the neighbor unreachable

    D.Router R1 is waiting for a reply from the neighbor 10.1.2.1 in response to the query sent out about network 10 .6.1.0/24


    参考答案：D

  • 第6题：

    Refer to the exhibit.The network administrator normally establishes a telnet session with the switch from host A.However,host A is unavailable.The administrator′s attempt to the switch from host B fails,but pings to the other two hosts are successful.what is the issue?（）

    A.Host B and the switch need to be in the same subnet.

    B.The switch needs and appropriate default gateway assigned.

    C.The switch interface connected to the router is down.

    D.Host B need to be assigned an IP address in vlan 1.

    E.The switch interfaces need the appropriate IP addresses assigned.


    参考答案：B

  • 第7题：

    Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?（）

    • A、As numbers must be changed to match on all the routers.
    • B、Loopback interface must be configured so a DR is elected.
    • C、The no auto-summary command is needed on Router A and Router C.
    • D、Router B needs to have two network statements, one for each connected network.

    正确答案:A

  • 第8题：

    Host 1 has just started up and requests a web page from web server 2. Which two statements describe steps in the process Host 1 uses to send the request to web server 2 (choose two)（）。

    • A、Host 1 addresses the frames to the MAC address of router R1
    • B、Host 1 looks in its ARP cache for the MAC address of router R1
    • C、Host 1 addresses the frames to the MAC address of web server 2
    • D、Host 1 sends the packets to router R1 to be forwarded to web server 2
    • E、Host 1 sends a broadcast ARP request to obtain the MAC address of webserver2

    正确答案:C,E

  • 第9题：

    EIGRP is being used as the routing protocol on the company network. While troubleshooting somenetwork connectivity issues， you notice a large number of EIGRP SIA （Stuck in Active） messages.What causes these SIA routes？（）

    • A、The neighboring router stops receiving ACK packets from this router
    • B、The neighboring router starts receiving route updates from this router
    • C、The neighboring router is too busy to answer the query （generally caused by high CPUutilization）
    • D、The neighboring router is having memory problems and cannot allocate the memory to processthe query or build the reply packet

    正确答案:C,D

  • 第10题：

    单选题
    Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?（）
    A

    As numbers must be changed to match on all the routers.

    B

    Loopback interface must be configured so a DR is elected.

    C

    The no auto-summary command is needed on Router A and Router C.

    D

    Router B needs to have two network statements, one for each connected network.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    多选题
    While troubleshooting an EIGRP routing problem you notice that one of the company routers havegenerated a large number of SIA messages. What are two possible causes for EIGRP Stuck-In-Active routes？（）
    A

    Some query or reply packets are lost between the routers

    B

    The neighboring router starts receiving route updates from this router

    C

    A failure causes traffic on a link between two neighboring routers to flow in only one direction（unidirectional link）

    D

    The neighboring router stops receiving ACK packets from this router


    正确答案： A,C
    解析： 暂无解析

  • 第12题：

    多选题
    What are two examples of RE exception traffic?（）
    A

    BGP updates that travel through the local router and are destined for a remote router.

    B

    OSPF hello packets that are sent from a remote router and are destined for the local router.

    C

    Telnet traffic that is sent from a remote host and is destined for the local router.

    D

    Telnet traffic that travels through the local router and is destined for a remote end host.


    正确答案： D,C
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. BigBids Incorporated is a worldwide auction provider. The network uses EIGRP as its routing protocol throughout the corporation. The network administrator does not understand the convergence of EIGRP. Using the output of the show ip eigrp topology all - links command, answer the administrator‘s questions.Which three networks is the router at 172.17.10.2 directly connected to?（）

    A. 172.17.0.0/30

    B. 172.17.1.0/24

    C. 172.17.2.0/24

    D. 172.17.3 .0/25

    E. 172.17.3.128/25

    F. 172.17.10.0/24


    参考答案：C, E, F

  • 第14题：

    Refer to the exhibit. ROUTE Enterprises has many stub networks in their enterprise network, such as router B and its associated network. EIGRP is to be implemented on router A so that neither the prefix for the S/0/0/0 interface nor the prefixes from router B appear in the routing tables for the router in the enterprise network. Which action will accomplish this goal?（）

    A. Declare router B a stub router using the eigrp stub command.

    B. Use the passive - interface command for interface Serial0/0/0.

    C. Use a mask with the network command to exclude interface Serial0/0/0.

    D. Implement a distribute list to exclude the link prefix from the routi ng updates.


    参考答案：C

  • 第15题：

    Refer to the above exhibit. Why are the EIGRP neighbors for this router not learning the routes redistributed from OSPF?()

    A. Redistribution must be enabled mutually (in both directions) to work correctly.

    B. auto - summary causes the OSPF routes redistributed into EIGRP to be summarized; thus the OSPF network 116.16.34 is summarized to 116.3 4.0.0, which is already covered by the EIGRP protocol.

    C. Default metrics are not configured under EIGRP.

    D. Both routing protocols must have unique autonomous system numbers for redistribution to function correctly.


    参考答案：C

  • 第16题：

    Refer to the exhibit The neighbor 10.1.1.1 weight 200 BGP configuration command has been configured on router A. What will be the result of this configuration? ()

    A. Router A will prefer the path through router B for network 172.20.0.0

    B. Router A will prefer the path through router C for network 172.20.0.0

    C. Packets from router D will prefer the path through router B for networks advertised by router A

    D. Packets from r outer D will prefer the path through router C for networks advertised by router A


    参考答案：A

  • 第17题：

    Refer to the exhibit. EIGRP has been configured on routers R1 and R2. However, R1 does not show R2 as a neighbor and does not accept routing updates from R2.What could be the cause of the problem?()

    A. The no auto - summary command has not been issued under the EIGRP process on both routers.

    B. Interface E0 on router R1 has not been configured with a secondary IP address of 10.1.2.1/24.

    C. EIGRP cannot exchange routing updates with a neighbor‘s router interface that is configured with tw o IP addresses.

    D. EIGRP cannot form neighbor relationship and exchange routing updates with a secondary address.


    参考答案：D

  • 第18题：

    Refer to the graphic.Host A is communicating with the seiver. What will be the source MAC address of the frames received by Host A from the server?()

    A.the MAC address of the seiver network interface

    B.the MAC address of host A

    C.the MAC address of router interface e 1

    D.the MAC address of router interface e0


    参考答案：D

  • 第19题：

    EIGRP is being used as the routing protocol on the PassGuide network. Whiletroubleshooting some network connectivity issues，you notice a large number of EIGRP SIA（StuckinActive）messages. What causes these SIA routes（）

    • A、The neighboring router stops receiving ACK packets from this router.
    • B、The neighboring router starts receiving route updates from this router.
    • C、The neighboring router is too busy to answer the query(generally caused by high CPU utilization).
    • D、The neighboring router is having memory problems and cannot allocate the memory to process the query or build the reply packet.

    正确答案:C,D

  • 第20题：

    While troubleshooting an EIGRP routing problem you notice that one of the company routers havegenerated a large number of SIA messages. What are two possible causes for EIGRP Stuck-In-Active routes？（）

    • A、Some query or reply packets are lost between the routers
    • B、The neighboring router starts receiving route updates from this router
    • C、A failure causes traffic on a link between two neighboring routers to flow in only one direction（unidirectional link）
    • D、The neighboring router stops receiving ACK packets from this router

    正确答案:A,C

  • 第21题：

    Router R1 exists in an Enterprise that uses EIGRP as its routing protocol. The show ip route command output on router R1 lists the following phrase: "Gateway of last resort is 1.1.1.1 to network 2.0.0.0". Whic h of the following is most likely to have caused this output to occur on R1?（）

    • A、R1 has been configured with an ip default- network 2.0.0.0 command.
    • B、R1 has been configured with an ip route 0.0.0.0 0.0.0.0 1.1.1.1 command.
    • C、R1 has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.
    • D、Another router has been configured with an ip default - network 2.0.0.0 command.
    • E、Another router has been configured with an ip route 2.0.0.0 255.0.0.0 1.1.1.1 command.

    正确答案:D

  • 第22题：

    多选题
    EIGRP is being used as the routing protocol on the PassGuide network. Whiletroubleshooting some network connectivity issues，you notice a large number of EIGRP SIA（StuckinActive）messages. What causes these SIA routes（）
    A

    The neighboring router stops receiving ACK packets from this router.

    B

    The neighboring router starts receiving route updates from this router.

    C

    The neighboring router is too busy to answer the query(generally caused by high CPU utilization).

    D

    The neighboring router is having memory problems and cannot allocate the memory to process the query or build the reply packet.


    正确答案： A,B
    解析： 暂无解析

  • 第23题：

    多选题
    EIGRP is being used as the routing protocol on the company network. While troubleshooting somenetwork connectivity issues， you notice a large number of EIGRP SIA （Stuck in Active） messages.What causes these SIA routes？（）
    A

    The neighboring router stops receiving ACK packets from this router

    B

    The neighboring router starts receiving route updates from this router

    C

    The neighboring router is too busy to answer the query （generally caused by high CPUutilization）

    D

    The neighboring router is having memory problems and cannot allocate the memory to processthe query or build the reply packet


    正确答案： A,D
    解析： 暂无解析

相关内容