You are working in a data center environment and are assigned the address range 10.188.31.0/23.You are asked to develop an IP addressing plan to allow the maximum number of subnets with as many as 30 hosts each.Which IP address range meets these requirements?()
A. 10.188.31.0/27
B. 10.188.31.0/26
C. 10.188.31.0/29
D. 10.188.31.0/28
E. 10.188.31.0/25
第1题:
What will happen if a private IP address is assigned to a public interface connected to an ISP?()
第2题:
What is the mechanism that is used to allocate MAC addresses that are assigned to the VDC for the system MAC address?()
第3题:
ompany.com has recently received a new p5-570 in the data center and wants to connect it to an existing HMC environment where each of the existing POWER5 servers has been assigned a static IP address. Which of the following actions should the technical specialist perform to set the service processor network address for a static IP?()
第4题:
Your network contains two data centers named Datacenter1 and Datacenter2. An Active Directory site exists for each data center. The data centers connect to the Internet by using a direct link. The data centers connect to each other by using a high-speed WAN link. You plan to deploy Exchange Server 2010 Mailbox servers in both data centers. You need to plan message routing to meet the following requirements:.Ensure outbound delivery of e-mail messages if a single server fails .Automatically load balance the Hub Transport server in each site .Deploy the minimum number of servers What should you include in the plan?()
第5题:
Addresses in a private range will be not routed on the Internet backbone.
Only the ISP router will have the capability to access the public network.
The NAT process will be used to translate this address in a valid IP address.
Several automated methods will be necessary on the private network.
A conflict of IP addresses happens, because other public routers can use the same range.
第6题:
Use a static IPv4 address in the range used at the branch office.
Use an alternate configureation that contains a static IP address in the range used at the main office
Use the address that was assigned by DHCP as a static IP address
Use an alternate configuration that contains a static Ip address in the range used at the branch office.
第7题:
Hyper-V Manager
Microsoft System Center Data Protection Manager (DPM) 2007 with SP1
Microsoft System Center Virtual Machine Manager (VMM) 2008 R2
Microsoft System Center Configuration Manager (SCCM) 2007 with SP3
第8题:
NX-OS uses a random MAC address from the IEEE OUI block that is assigned to Cisco.
The VDC system MAC is pulled from the active supervisor and concatenated through a hash to ensure uniqueness.
NX-OS uses a value that is based on a range that is assigned to the SPROM of the system backplane.
The VDC system MAC is based on a range that is allocated to the first line card that is installed in the switch.
第9题:
owner
touser
include
schemas
fromuser
transform
remap_schema
remap_datafile
reuse_datafiles
remap_tablespace
第10题:
You are working in a data center environment and are assigned the address range 10.188.31.0/23.You areasked to develop an IP addressing plan to allow the maximum number of subnets with as many as 30 hostseach.Which IP address range meets these requirements?()
第11题:
An administrator is creating a redundant environment for a current data center. A backup site must be available if the entire data center site should become unavailable. To reduce costs, this backup site does not need to be up and running at all times ready for failover. It must contain equipment and the ability to restore data from the data center. Which of the following site types should be considered to meet these requirements? ()
第12题:
Your company has a Microsoft Hyper-V Server 2008 R2 environment. You manage the virtual environment by using Microsoft System Center Virtual Machine Manager (VMM) 2008 R2. You are creating a virtual test environment by installing two child partitions. The test environment must be completely isolated from all production servers. You need to ensure that the child partitions can communicate with each other. Which connection type should you configure?()
第13题:
Use as tatic IPv4 address in the range used at the branch office.
Use an alternate configuration that contains a staticI Paddress in the range used at the main office.
Use the address that was assigned by the DHCP server as astatic IP address.
Use an alternate configuration that contains a staticI Paddress in the range used at the branch office.
第14题:
10.188.31.0/27
10.188.31.0/26
10.188.31.0/29
10.188.31.0/28
10.188.31.0/25
第15题:
14
16
30
32
62
64
第16题:
10.188.31.0/27
10.188.31.0/26
10.188.31.0/29
10.188.31.0/28
10.188.31.0/25
第17题:
Use a static IPv4 address in the range used at the branch office.
Use an alternate configuration that contains a static IP address in the range used at the main office.
Use the address that was assigned by the DHCP server as a static IP address.
Use an alternate configuration that contains a static IP address in the range used at the branch office.
第18题:
Assign the main office and each branch office a new class A private IP address range.
Assign the main office and each branch office a new class B private IP address range.
Assign the main office and each branch office a subnet from a new class B private IP address range.
Assign the main office and each branch office a subnet from the current class C private IP address range.