Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?()A.As numbers must be changed to match on all the routers.B.Loopback interface must be configured so a DR is elected.C.The no auto-summary com

题目
Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?()

A.As numbers must be changed to match on all the routers.

B.Loopback interface must be configured so a DR is elected.

C.The no auto-summary command is needed on Router A and Router C.

D.Router B needs to have two network statements, one for each connected network.

相似考题

1.Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated in the exhibit. Given the partial configuration of router R2, which network will be present in th e routing table of R4?（）A. Network BB. Network A and Network BC. Network AD. neither Network A nor Network B

2.Refer to the exhibit. AS 65500 is not advertising the prefix 192.168.12.0/22 to its provider. AS 65500 is running OSPF as its IGP. Whi ch of the following additions to the configuration is most likely to solve the problem?（）A. RouterA(config)#ip cefB. RouterA(config)#ip route 192.168.12.0 255.255.255.252 null 0C. RouterA(config - router)#ebgp multihop 1D. RouterA(config - router)#re distribute ospf 1E. RouterA(config - router)#neighbor 192.168.14.253 next - hop - selfF. RouterA(config - router)#neighbor 192.168.14.253 local - as 65500

3.Refer to the exhibit. When you examine the routing table of R1 and R4, you are not able to see the R1 Ethernet subnet on the R4 routing ta ble. You are also not able to see the R4 Ethernet subnet on the R1 routing table.Which configuration change should be made to resolve this issue? Select the routers where the configuration change will be required, and select the required EIGRP configur ation command(s).（）A. R1 and R4B. R2 and R3C. ip summary-address eigrp 1 10.1.1.0 255.255.255.0 and ip summary - address eigrp 110.2.2.0 255.255.255.0D. variance 2E. eigrp stub connectedF. no auto - summary

4.Which three route filtering statements are true?()A. After the router ospf 10 and passive - interface s0/0 commands have been issued , the s0/0 interface will not send any OSPF updates, but will receive routing updates on that interfaceB. When you use the passive - interface command with RIPv2, multicasts are sent out the specified interfaceC. After the router rip and passive -interface s0/0 commands have been issued, the s0/0 interface will not send any RIP updates, but will receive routing updates on that interfaceD. When you use the passive - interface command with EIGRP, hel lo messages are not sent out the specified interfaceE. After the router eigrp 10 and passive - interface s0/0 commands have been issued, the s0/0 interface will not send any EIGRP updates, but will receive routing updates on that interfaceF. When you use the passive - interface command with OSPF, hello messages are not sent out the specified interface

更多“Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?() ”相关问题

  • 第1题：

    Refer to the exhibit. What is required to complete the IPv6 routing configurations shown?()

    A. Interface authentication must be configured

    B. The routing processes must be configured with an area ID

    C. IP unicast routing must be enabled

    D. IPv4 ad dresses must be applied to the interfaces


    参考答案：C

  • 第2题：

    Refer to the exhibit. This network is running IS － IS. Router RTC is inside Cloud1. From the output on RTD, which two statement s are true?()

    A.Because it is running IS - IS in IP - only mode, RTD will not transmit CLNS packets

    B.IP routing updates between RTC and RTD will be IP datagrams that are encapsulated by HDLC

    C.The SNPA for RTE is the source data link address that is used to transmit frames to RTD

    D.IP routing updates between RTC and RTD will be CLNS datagrams that are encapsulated by HDLC

    E.The NET for RTE will be 49.0150.0019.06b7.fd5f.00

    F.IP routing updates between RTC and RTD will be IP datagrams that a re encapsulated by CLNS


    参考答案：C, D

  • 第3题：

    Refer to the exhibit. EIGRP has been configured on routers R1 and R2. However, R1 does not show R2 as a neighbor and does not accept routing updates from R2.What could be the cause of the problem?()

    A. The no auto - summary command has not been issued under the EIGRP process on both routers.

    B. Interface E0 on router R1 has not been configured with a secondary IP address of 10.1.2.1/24.

    C. EIGRP cannot exchange routing updates with a neighbor‘s router interface that is configured with tw o IP addresses.

    D. EIGRP cannot form neighbor relationship and exchange routing updates with a secondary address.


    参考答案：D

  • 第4题：

    Refer to the exhibit. When running OSPF, What would cause router A not to form an adjacency with router B?()

    A.The loopback addresses are on different subnets

    B.The value of the dead timers on the router are different

    C.Route summarization is enabled on both routers

    D.The process indentifier on router A is different than the process identifier on router B


    参考答案：B

  • 第5题：

    Refer to the exhibit. In this VLSM addressing scheme, what summary address would be sent from routerA?()

    A.172.16.0.0/16

    B.172.16.0.0/20

    C.172.16.0.0/24

    D.172.32.0.0/16

    E.172.32.0.0/17

    F.172.64.0.0/16


    参考答案：A

  • 第6题：

    Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?（）

    • A、As numbers must be changed to match on all the routers.
    • B、Loopback interface must be configured so a DR is elected.
    • C、The no auto-summary command is needed on Router A and Router C.
    • D、Router B needs to have two network statements, one for each connected network.

    正确答案:A

  • 第7题：

    Half of your network uses RIPv2 and the other half runs OSPF. The networks do not communicate with each other. Which two of these factors describe the impact of activating EIGRP over each separate part？ （）

    • A、EIGRP will not be accepted when configured on the actual RIPv2 routers.
    • B、OSPF will no longer be used in the routing table， because you only have EIGRP internal routes running.
    • C、OSPF will no longer be used in the routing table， because you only have EIGRP external routes running.
    • D、RIPv2 will populate its RIP database but not its routing table， because you only have EIGRP external routes running.
    • E、RIPv2 will populate its RIP database but not its routing table， because you only have EIGRP internal routes running.
    • F、OSPF database will have RIPv2 routes.

    正确答案:B,E

  • 第8题：

    How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured (Choose three.)（）。

    • A、If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.
    • B、If RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.
    • C、If EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.
    • D、If EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.
    • E、If EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.
    • F、If EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.

    正确答案:A,D,E

  • 第9题：

    What is the requirement of Remote Triggered Black Hole （RTBH ） filtering？（）

    • A、IBGP updates exchange between trigger router and black hole router
    • B、EBGP updates exchange between trigger router and black hole router
    • C、OSPF updates exchange between trigger router and black hole router
    • D、ISIS updates exchange between trigger router and black hole router

    正确答案:A

  • 第10题：

    EIGRP is being used as the routing protocol on the company network. While troubleshooting somenetwork connectivity issues， you notice a large number of EIGRP SIA （Stuck in Active） messages.What causes these SIA routes？（）

    • A、The neighboring router stops receiving ACK packets from this router
    • B、The neighboring router starts receiving route updates from this router
    • C、The neighboring router is too busy to answer the query （generally caused by high CPUutilization）
    • D、The neighboring router is having memory problems and cannot allocate the memory to processthe query or build the reply packet

    正确答案:C,D

  • 第11题：

    单选题
    Refer to the exhibit. When running EIGRP, What is required for RouterA to exchange routing updates with RouterC?（）
    A

    As numbers must be changed to match on all the routers.

    B

    Loopback interface must be configured so a DR is elected.

    C

    The no auto-summary command is needed on Router A and Router C.

    D

    Router B needs to have two network statements, one for each connected network.


    正确答案： B
    解析： 暂无解析

  • 第12题：

    多选题
    What two things will a router do when running a distance vector routing protocol? （）
    A

    Send periodic updates regardless of topology changes.

    B

    Send entire routing table to all routers in the routing domain.

    C

    Use the shortest-path algorithm to the determine best path.

    D

    Update the routing table based on updates from their neighbors.

    E

    Maintain the topology of the entire network in its database.


    正确答案： B,C
    解析： 暂无解析

  • 第13题：

    Refer to the exhibit. What three statements are true about the IS － IS configuration?()

    A.The router is in area 49.0001.0002

    B.The router acts as a Level 1 - 2 router

    C.CLNS routing is enable d for the router

    D.The router has a system ID of 0003.0004

    E.The interfaces have a functional IS - IS configuration

    F.The network service access point selector (NSEL) byte has a value of 0


    参考答案：B, E, F

  • 第14题：

    Refer to the exhibit. Routers R1 and R2 are running EIGRP and have converged. On the basis of the information that is presented, which statement is true? ()

    A. Both outgoing and incoming routing updates on R1 will be permitted because the d istribute - list 20 out Serial0/0 command cannot be used with association with the outgoing interface.

    B. All incoming routing updates from R2 will be suppressed, but the outgoing updates will continue to be sent.

    C. Both outgoing and incoming routing up dates on R1 will be stopped because of the passive - interface Serial0/0 configuration statement.

    D. All outgoing routing updates from router R1 to router R2 will be suppressed, but the inbound updates will continue to be received.


    参考答案：C

  • 第15题：

    What parameters must you specify when you enable EIGRP routing?()

    A. The broadcast address, and AS number

    B. The network number and AS number

    C. EIGRP routing, network number and passive interface

    D. EIGRP routing, network number, and AS


    参考答案：D

  • 第16题：

    What two things will a router do when running a distance vector routing protocol?()

    A. Send periodic updates regardless of topology changes.

    B. Send entire routing table to all routers in the routing domain.

    C. Use the shortest-path algorithm to the determine best path.

    D. Update the routing table based on updates from their neighbors.

    E. Maintain the topology of the entire network in its database.


    参考答案：A, D

  • 第17题：

    Which three statements about EIGRP are true?()

    A.EIGRP converges fast RIP because of DUAL and backup routes that are stored in the topology table.

    B.EIGRP uses a hello protocol to establish neighbor relationships

    C.EIGRP uses split horizon and reverse poisoning to avoid routing loops.

    D.EIGRP uses periodic updates to exchange routing information

    E.EIGRP allows routers of different manufacturers to interoperate

    F.EIGRP supports VLSM and authentication for routing updates.

    G. EIGRP use a broadcast address to send routing information.


    参考答案：A, B, F

  • 第18题：

    When EIGRP is used as the PE-CE routing protocol which of these statements is correct?（）

    • A、EIGRP can be used only as the PE-CE routing protocol if the PE and CE routers are in the same AS
    • B、Other EIGRP AS routes are automatically advertised to the CE router and do not require a redistribution configuration command to be configured
    • C、Unlike other routing protocols that are used between PE and CE routers, EIGRP supports backdoor links
    • D、Configure of the VPN is only required on the PE router

    正确答案:D

  • 第19题：

    What parameters must you specify when you enable EIGRP routing?（）

    • A、The broadcast address, and AS number
    • B、The network number and AS number
    • C、EIGRP routing, network number and passive interface
    • D、EIGRP routing, network number, and AS

    正确答案:D

  • 第20题：

    While troubleshooting an EIGRP routing problem you notice that one of the company routers havegenerated a large number of SIA messages. What are two possible causes for EIGRP Stuck-In-Active routes？（）

    • A、Some query or reply packets are lost between the routers
    • B、The neighboring router starts receiving route updates from this router
    • C、A failure causes traffic on a link between two neighboring routers to flow in only one direction（unidirectional link）
    • D、The neighboring router stops receiving ACK packets from this router

    正确答案:A,C

  • 第21题：

    Which three statements about EIGRP are true?（）

    • A、EIGRP converges fast RIP because of DUAL and backup routes that are stored in the topology table.
    • B、EIGRP uses a hello protocol to establish neighbor relationships
    • C、EIGRP uses split horizon and reverse poisoning to avoid routing loops.
    • D、EIGRP uses periodic updates to exchange routing information
    • E、EIGRP allows routers of different manufacturers to interoperate
    • F、EIGRP supports VLSM and authentication for routing updates.
    • G、EIGRP use a broadcast address to send routing information.

    正确答案:A,B,F

  • 第22题：

    Which three route filtering statements are true?（）

    • A、After the router ospf 10  and passive - interface s0/0 commands have been issued , the s0/0 interface will not send any OSPF updates, but will receive routing updates on that interface
    • B、When you use the passive - interface command with RIPv2, multicasts are sent out the specified interface
    • C、After the router rip and passive -interface s0/0 commands have been issued, the s0/0 interface will not send any RIP updates, but will receive routing updates on that interface
    • D、When you use the passive - interface command with EIGRP, hel lo messages are not sent out the specified interface
    • E、After the router eigrp 10 and passive - interface s0/0 commands have been issued, the s0/0 interface will not send any EIGRP updates, but will receive routing updates on that interface
    • F、When you use the passive - interface command with OSPF, hello messages are not sent out the specified interface

    正确答案:C,D,F

  • 第23题：

    多选题
    Which three statements about EIGRP are true?（）
    A

    EIGRP converges fast RIP because of DUAL and backup routes that are stored in the topology table.

    B

    EIGRP uses a hello protocol to establish neighbor relationships

    C

    EIGRP uses split horizon and reverse poisoning to avoid routing loops.

    D

    EIGRP uses periodic updates to exchange routing information

    E

    EIGRP allows routers of different manufacturers to interoperate

    F

    EIGRP supports VLSM and authentication for routing updates.

    G

    EIGRP use a broadcast address to send routing information.


    正确答案： D,A
    解析： 暂无解析

  • 第24题：

    多选题
    How will router A choose a path to the 10.1.2.0/24 network when different routing protocols are configured (Choose three.)（）。
    A

    If RIPv2 is the routing protocol, only the path AD will be installed in the routing table by default.

    B

    If RIPv2 is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.

    C

    If EIGRP is the routing protocol, only the path AD will be installed in the routing table by default.

    D

    If EIGRP is the routing protocol, the equal cost paths ABD and ACD will be installed in the routing table by default.

    E

    If EIGRP and OSPF are both running on the network, the EIGRP paths will be installed in the routing table.

    F

    If EIGRP and OSPF are both running on the network, the OSPF paths will be installed in the routing table.


    正确答案： D,B
    解析： 暂无解析

相关内容