A medium-sized company has a Class C IP address. It has two Cisco routers and one non-Cisco router. All three routers are using RIP version 1. The company network is using the block of 198.133.219.0/24. The company has decided it would be a good idea to s

题目

A medium-sized company has a Class C IP address. It has two Cisco routers and one non-Cisco router. All three routers are using RIP version 1. The company network is using the block of 198.133.219.0/24. The company has decided it would be a good idea to split the network into three smaller subnets and create the option of conserving addresses with VLSM. What is the best course of action if the company wants to have 40 hosts in each of the three subnets?（）

A.Convert all the routers to EIGRP and use 198.133.219.32/27, 198.133.219.64/27, and 198.133.219.92/27 as the new subnetworks.

B.Maintain the use of RIP version 1 and use 198.133.219.32/27, 198.133.219.64/27, and 133.219.92/27 as the new subnetworks.

C.Convert all the routers to EIGRP and use 198.133.219.64/26, 198.133.219.128/26, and 133.219.192/26 as the new subnetworks.

D.Convert all the routers to RIP version 2 and use 198.133.219.64/26, 198.133.219.128/26, and 133.219.192/26 as the new subnetworks.

E.Convert all the routers to OSPF and use 198.133.219.16/28, 198.133.219.32/28, and 198.133.219.48/28 as the new subnetworks.

F.Convert all the routers to static routes and use 198.133.219.16/28, 198.133.219.32/28, and

相似考题

1.A new company has been given one public IP address. The company employs 200 users requiring Internet access from the headquarters.Which of the following can be implemented to provide Internet access for all the employees?（）A. MulticastingB. Proxy serverC. NATD. Subnetting

2.Refer to the exhibit. EIGRP has been configured on routers R1 and R2. However, R1 does not show R2 as a neighbor and does not accept routing updates from R2.What could be the cause of the problem?()A. The no auto - summary command has not been issued under the EIGRP process on both routers.B. Interface E0 on router R1 has not been configured with a secondary IP address of 10.1.2.1/24.C. EIGRP cannot exchange routing updates with a neighbor‘s router interface that is configured with tw o IP addresses.D. EIGRP cannot form neighbor relationship and exchange routing updates with a secondary address.

3. A company has a Frame Relay WAN with one central - site router and 100 branch office routers. A partial mesh of PVCs exists: one PVC between the central site and each of t he 100 branch routers. All routers use point - to - point subinterfaces and one subnet per PVC. Which of the following is true about OSPF in this design?（）A、The central site router has 100 fully adjacent neighborships with the 100 branchesB、The central site router has neighborships with all branch routers, but fully adjacent neighbors with only two branchesC、The central site router has a neighborship with the Frame Relay switcHD、None of the other answers is correct

4.CIS .com recently acquired a smaller competitor. The acquired company is not currently using Cisco routers, so you have connected the two WANs via an authenticated PPP link. After configuration both routers, issuing the show interface s0/0 command on the Cisco Router shows the interface to be in the up/down state.Which two of these are possible causes? （）A. Bandwidth statements do not matchB. MTUs do not matchC. IP Addresses are not in the same subnetD. CHAP passwords do not match

参考答案和解析
参考答案：D
更多“A medium－sized company has a Class C IP address. It has two Cisco routers and one non－Cisc ”相关问题

  • 第1题：

    What are two advantages that the Cisco SA 520 all-in-one UTM security device has over implementing a typical router in a small business network？（）

    • A、 Cisco Intrusion Prevention System
    • B、 higher bandwidth
    • C、 virtual private networks
    • D、 access control lists
    • E、 URL filtering

    正确答案:C,E

  • 第2题：

    An administrator has set up three partitions using a shared processor pool with 2 processors and SMT turned on. The partitions are activated in the following sequence: Partition one: Min = 0.5, max = 3.0, desired = 1.0; Partition two: Min = 1.0, max = 3.0, desired = 1.5 Partition three: Min = 1, max = 0.5, desired = 2. What is the outcome?（）

    • A、Partition one starts and has 3.0 logical processors. Partition two does not start. Partition three has 1.0 logical processors. 
    • B、Partition one starts and has 1.5 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 processors. 
    • C、Partition one starts and has 2.0 logical processors. Partition two start and has 2.0 logical processors. Partition three does not start. 
    • D、Partition one starts and has 2.0 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 logical processors.

    正确答案:C

  • 第3题：

    The network administrator has discovered that the power supply has failed on a switch in the company LAN and that the switch has stopped functioning. It has been replaced with a Cisco Catalyst 2950 series switch.What must be done to ensure that this new switch becomes the root bridge on the network?（）

    • A、One router is running RIPv1.
    • B、RIP neighbor is 224.0.0.9.
    • C、The network contains a loop.
    • D、Network 10.10.1.0 is reachable.

    正确答案:A

  • 第4题：

    A medium-sized company has a Class C IP address. It has two Cisco routers and one non-Cisco router. All three routers are using RIP version 1. The company network is using the block of 198.133.219.0/24. The company has decided it would be a good idea to split the network into three smaller subnets and create the option of conserving addresses with VLSM. What is the best course of action if the company wants to have 40 hosts in each of the three subnets?（）

    • A、Convert all the routers to EIGRP and use 198.133.219.32/27, 198.133.219.64/27, and 198.133.219.92/27 as the new subnetworks.
    • B、Maintain the use of RIP version 1 and use 198.133.219.32/27, 198.133.219.64/27, and 133.219.92/27 as the new subnetworks.
    • C、Convert all the routers to EIGRP and use 198.133.219.64/26, 198.133.219.128/26, and 133.219.192/26 as the new subnetworks.
    • D、Convert all the routers to RIP version 2 and use 198.133.219.64/26, 198.133.219.128/26, and 133.219.192/26 as the new subnetworks.
    • E、Convert all the routers to OSPF and use 198.133.219.16/28, 198.133.219.32/28, and 198.133.219.48/28 as the new subnetworks.
    • F、Convert all the routers to static routes and use 198.133.219.16/28, 198.133.219.32/28, and

    正确答案:D

  • 第5题：

    Which one of the statements below correctly describes the Virtual Router Redundancy Protocol  （VRRP），  which is being used in the Company network to provide redundancy？（）

    • A、 A VRRP group has one active and one or more standby virtual routers.
    • B、 A VRRP group has one master and one or more backup virtual routers.
    • C、 A VRRP group has one master and one redundant virtual router.
    • D、 None of the other alternatives apply

    正确答案:B

  • 第6题：

    A customer has two locations located 7 kilometers apart. The production site has a Cisco 9509chassis with 48 Fibre Channel ports activated， and the disaster recovery site has a Cisco 9509chassis with 48 Ethernet ports activated. Which of the following products will be used to get thedata from one location to the other？（）

    • A、IBM SAN40-B4
    • B、Cisco MDS 9222i
    • C、Cisco MDS 9148
    • D、IBM SAN32B-E4 with encryption

    正确答案:B

  • 第7题：

    单选题
    A medium-sized company has a Class C IP address. It has two Cisco routers and one non-Cisco router. All three routers are using RIP version 1. The company network is using the block of 198.133.219.0/24. The company has decided it would be a good idea to split the network into three smaller subnets and create the option of conserving addresses with VLSM. What is the best course of action if the company wants to have 40 hosts in each of the three subnets?（）
    A

    Convert all the routers to EIGRP and use 198.133.219.32/27, 198.133.219.64/27, and 198.133.219.92/27 as the new subnetworks.

    B

    Maintain the use of RIP version 1 and use 198.133.219.32/27, 198.133.219.64/27, and 133.219.92/27 as the new subnetworks.

    C

    Convert all the routers to EIGRP and use 198.133.219.64/26, 198.133.219.128/26, and 133.219.192/26 as the new subnetworks.

    D

    Convert all the routers to RIP version 2 and use 198.133.219.64/26, 198.133.219.128/26, and 133.219.192/26 as the new subnetworks.

    E

    Convert all the routers to OSPF and use 198.133.219.16/28, 198.133.219.32/28, and 198.133.219.48/28 as the new subnetworks.

    F

    Convert all the routers to static routes and use 198.133.219.16/28, 198.133.219.32/28, and


    正确答案： A
    解析： 暂无解析

  • 第8题：

    单选题
    A company that makes Computer Assisted Design （CAD） software has， within its application， some utilityclasses that are used to perform 3D rendering tasks. The company’s chief scientist has just improved theperformance of one of the utility classes’ key rendering algorithms， and has assigned a programmer toreplace the old algorithm with the new algorithm. When the programmer begins researching the utilityclasses， she is happy to discover that the algorithm to be replaced exists in only one class. The programmer reviews that class’s API， and replaces the old algorithm with the new algorithm， being carefulthat her changes adhere strictly to the class’s API. Once testing has begun， the programmer discovers thatother classes that use the class she changed are no longer working properly. What design flaw is mostlikely the cause of these new bugs？（）
    A

    Inheritance

    B

    Tight coupling

    C

    Low cohesion

    D

    High cohesion

    E

    Loose coupling


    正确答案： E
    解析： 暂无解析

  • 第9题：

    单选题
    Customer X has a hub-and-spoke Frame Relay network， with a central office and two branch offices （RemoteA and RemoteB）. Each location has only one physical link to the Frame Relay cloud and RemoteB has a router that is not a Cisco router. Since the installation， there is no connectivity between RemoteB and the central office. What is a possible solution to this issue？ （）
    A

     Because Frame Relay IETF encapsulation is only configurable at interface level， you must use IETF encapsulation on all routers.

    B

     This is not a possible scenario. A dedicated Frame Relay link to RemoteB is mandatory at the central office.

    C

     The router at RemoteB must be replaced by a Cisco router.

    D

     Use Frame Relay IETF encapsulation on a per-VC basis on the central office router.

    E

     There is a problem in the Frame Relay cloud， because Cisco routers are compatible with IETF Frame Relay.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    单选题
    A company has a Frame Relay WAN with one central - site router and 100 branch office routers. A partial mesh of PVCs exists: one PVC between the central site and each of t he 100 branch routers. All routers use point - to - point subinterfaces and one subnet per PVC. Which of the following is true about OSPF in this design?（）
    A

    The central site router has 100 fully adjacent neighborships with the 100 branches

    B

    The central  site router has neighborships with all branch routers, but fully adjacent neighbors with only two branches

    C

    The central site router has a neighborship with the Frame Relay switcH

    D

    None of the other answers is correct


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    Which one of the statements below correctly describes the Virtual Router Redundancy Protocol  （VRRP），  which is being used in the Company network to provide redundancy？（）
    A

     A VRRP group has one active and one or more standby virtual routers.

    B

     A VRRP group has one master and one or more backup virtual routers.

    C

     A VRRP group has one master and one redundant virtual router.

    D

     None of the other alternatives apply


    正确答案： B
    解析： 暂无解析

  • 第12题：

    多选题
    A small company that is considering a Cisco converged network solution has asked whether you recommend the Cisco 2800 or 3800 Series Integrated Services Routers. Which two resources would you consult to determine the appropriate product？ （）
    A

    Cisco Partner Consultative Support

    B

    Network Availability Improvement Support

    C

    Cisco.com

    D

    Cisco Focused Technical Support


    正确答案： A,D
    解析： 暂无解析

  • 第13题：

    CIS .com recently acquired a smaller competitor. The acquired company is not currently using Cisco routers, so you have connected the two WANs via an authenticated PPP link. After configuration both routers, issuing the show interface s0/0 command on the Cisco Router shows the interface to be in the up/down state. Which two of these are possible causes? （）

    • A、Bandwidth statements do not match
    • B、MTUs do not match
    • C、IP Addresses are not in the same subnet
    • D、CHAP passwords do not match

    正确答案:B,D

  • 第14题：

    Customer X has a hub-and-spoke Frame Relay network， with a central office and two branch offices （RemoteA and RemoteB）. Each location has only one physical link to the Frame Relay cloud and RemoteB has a router that is not a Cisco router. Since the installation， there is no connectivity between RemoteB and the central office. What is a possible solution to this issue？ （）

    • A、 Because Frame Relay IETF encapsulation is only configurable at interface level， you must use IETF encapsulation on all routers.
    • B、 This is not a possible scenario. A dedicated Frame Relay link to RemoteB is mandatory at the central office.
    • C、 The router at RemoteB must be replaced by a Cisco router.
    • D、 Use Frame Relay IETF encapsulation on a per-VC basis on the central office router.
    • E、 There is a problem in the Frame Relay cloud， because Cisco routers are compatible with IETF Frame Relay.

    正确答案:D

  • 第15题：

    A small company that is considering a Cisco converged network solution has asked whether you recommend the Cisco 2800 or 3800 Series Integrated Services Routers. Which two resources would you consult to determine the appropriate product？ （）

    • A、 Cisco Partner Consultative Support
    • B、 Network Availability Improvement Support
    • C、 Cisco.com
    • D、 Cisco Focused Technical Support

    正确答案:A,C

  • 第16题：

    An etwork administrator has enabled OSPF across an NBMA network and has issued the command ip ospf network nonbroadcast. Given those facts, which two statements are true?（）

    • A、Interfaces will automatically detect and build adjacencies with neighbor routers
    • B、DR and BDR elections will not occur
    • C、DR and BDR elections will occur
    • D、The neighbor command is required to build adjacencies
    • E、All routers must be configured in a fully meshed topology with all other routers

    正确答案:C,D

  • 第17题：

    A computer that has dynamic IP addressing is not receiving an IP address. Which of the following is MOST likely the problem?（）

    • A、SNMP
    • B、DHCP
    • C、DNS
    • D、NAT

    正确答案:B

  • 第18题：

    Company.com wishes to use IPAT via IP replacement in a two-node mutual cluster. Each node  has two Ethernet 10/100/1000 adapters. Throughout the planning session，the customer has asked questions about subnet and VLAN requirements for the intended network topology.  Which of the following best describes the network requirements？（）  

    • A、 The service IP addresses must be on a separate subnet and VLAN.
    • B、 The non-service and service IP addresses must be on the same subnet and on the same VLAN.
    • C、 All interfaces on a node must be in different subnets. All subnets must be on the same VLAN. 
    • D、 One non-service and one service IP address must be on the same logical subnet. All interfaces must be on the same VLAN.

    正确答案:D

  • 第19题：

    单选题
    A customer has four AIX partitions that require a SAN. The disk subsystem must replicate to aremote site via an IP network. Each site has two Cisco MDS 9509 directors with fibre channel linecards. Which of the following must be added to each director to meet the IP requirement？（）
    A

    tri-rate SFP

    B

    update to the latest Cisco IOS

    C

    FCIP activation on the existing 16 FC line cards

    D

    Multiprotocol Services Module with FCIP activation


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    An administrator has set up three partitions using a shared processor pool with 2 processors and SMT turned on. The partitions are activated in the following sequence: Partition one: Min = 0.5, max = 3.0, desired = 1.0; Partition two: Min = 1.0, max = 3.0, desired = 1.5 Partition three: Min = 1, max = 0.5, desired = 2. What is the outcome?（）
    A

    Partition one starts and has 3.0 logical processors. Partition two does not start. Partition three has 1.0 logical processors. 

    B

    Partition one starts and has 1.5 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 processors. 

    C

    Partition one starts and has 2.0 logical processors. Partition two start and has 2.0 logical processors. Partition three does not start. 

    D

    Partition one starts and has 2.0 logical processors. Partition two has 1.0 logical processors. Partition three has 0.1 logical processors.


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    This company has two branches: one in Paris and _____ in New York.
    A

    Another

    B

    one other

    C

    the other

    D

    other


    正确答案： D
    解析：
    句意：这个公司有两个分公司，一个设在巴黎，另一个在纽约。固定搭配。one ... the other意思是“（两个当中的）一个……另一个”。A项one ... another意思是“（三个或三个以上的）另一个”；B项one other 无此用法。

  • 第22题：

    单选题
    A new company has been given one public IP address. The company employs 200 users requiring Internet access from the headquarters. Which of the following can be implemented to provide Internet access for all the employees?（）
    A

    Multicasting

    B

    Proxy server

    C

    NAT

    D

    Subnetting


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    Customer X has a hub-and-spoke Frame Relay network， with a central office and two branch offices （RemoteA and RemoteB）. Each location has only one physical link to the Frame Relay cloud and RemoteB has a router that is not a Cisco router. Since the installation， there is no connectivity between RemoteB and the central office. What is a possible solution to this issue？（）
    A

    Because Frame Relay IETF encapsulation is only configurable at interface level， you must use IETF encapsulation on all routers.

    B

    This is not a possible scenario. A dedicated Frame Relay link to RemoteB is mandatory at the central office.

    C

    The router at RemoteB must be replaced by a Cisco router.

    D

    Use Frame Relay IETF encapsulation on a per-VC basis on the central office router.

    E

    There is a problem in the Frame Relay cloud， because Cisco routers are compatible with IETF Frame Relay.


    正确答案： D
    解析： 暂无解析

  • 第24题：

    单选题
    A company that makes Computer Assisted Design (CAD) software has, within its application, some utility classes that are used to perform 3D rendering tasks. The company's chief scientist has just improved the performance of one of the utility classes' key rendering algorithms, and has assigned a programmer to replace the old algorithm with the new algorithm. When the programmer begins researching the utility classes, she is happy to discover that the algorithm to be replaced exists in only one class. The programmer reviews that class's API, and replaces the old algorithm with the new algorithm, being careful that her changes adhere strictly to the class's API. Once testing has begun, the programmer discovers that other classes that use the class she changed are no longer working properly. What design flaw is most likely the cause of these new bugs?（）
    A

    Inheritance

    B

    Tight coupling

    C

    Low cohesion

    D

    High cohesion

    E

    Loose coupling

    F

    Object immutability


    正确答案： A
    解析： 暂无解析

相关内容