A routing protocol is required that supports:1)routing update authentication2)an addressing scheme that conserves IP addresses3)multiple vendors4)a network with over 50 routers Which routing protocol fulfills these requirements（）。A.RIPv1B.RIPv2C.EIGRPD.OS

题目

A routing protocol is required that supports:1)routing update authentication2)an addressing scheme that conserves IP addresses3)multiple vendors4)a network with over 50 routers Which routing protocol fulfills these requirements（）。

A.RIPv1

B.RIPv2

C.EIGRP

D.OSPF

相似考题

1.Intermediate system to intermediate system (IS - IS), is a protocol used by network devices (routers) to determine the best way to forward datagrams through a packet - switched network, a process called routing. Which three attributes are of the IS - IS routing protocol? （）A. supports VLSMB. link - state routing protocolC. operati on is similar to BGPD. supports two routing levels within an autonomous system

2.What are some of the characteristics of the OSPF routing protocol?()A. It confines network instability to a single area of network.B. It increases the routing overhead of the networkC. It supports VLSMD. It routes between Autonomous Systems.E. It allows extensive control of routing updatesF. None of the above

3.Which two are NOT characteristics of the OSPF routing protocol?()A. It confines network instability to a single area of network.B. It increases the routing overhead of the networkC. It supports VLSMD. It routes between Autonomous Systems.E. It allows extensive control of routing updates

4.Which of the following statements are correct in regard to classless routing protocols?()A. Discontiguous subnets are not allowed.B. Variable length subnet masks are allowed.C. RIP v1 is a classless routing protocol.D. IGRP supports classless routing within the same autonomous system.E. RIP v2 supports classless routing.

更多“A routing protocol is required that supports:1)routing update authentication2)an addressin ”相关问题

  • 第1题：

    You need to implement the use of a routing protocol that meets the followingrequirements:1. Converges quickly2. Supports VLSM, CIDR, IP, and IPX.3. Uses minimal bandwidth for routing updates.Which one of the following routing protocols would be the best choice?（）

    A. RIPv1

    B. RIPv2

    C. IGRP

    D. OSPF

    E. EIGRP


    参考答案：E

  • 第2题：

    One of the most widely used routing protocols in IP networks is the Routing Information Protocol（RIP）。RIP is the canonical example of a routing protocol built on the（ ）algorithm.Routing protocols in internetworks differ slightly from the idealized graph model.In an internetwork,the goal of the routers to forward packets to various（请作答此空）.
    Routers running RIP send their advertisement about cost every（ ）seconds.A router also sends an update message whenever an update from another router causes it to change its routing table.
    It is possible to use a range of different metrics or costs for the links in a routing protocol.RIP takes the simplest approach,with all link costs being equal（ ）。Thus it always tries to find the minimum hop route.Valid distances are 1 through（ ）。This also limits RIP to running on fairly small networks.

    A.computers
    B.routers
    C.switches
    D.networks

    答案：D
    解析：
    参考译文
    IP网络中广泛使用的路由协议之一是路由信息协议（RIP）。RIP是基于路由算法的路由协议。网络中的路由协议与理想的图算法存在少量的差异。在互联网中，路由器的目的是将数据包转发给不同的。
    运行RIP协议的路由器每秒广播一次路由信息，另外，每当路由器收到其他路由器的更新消息而导致其路由表变化时，就会发送更新消息。
    路由协议使用不同的度量或成本来建立连接是可能的。RIP采用了最简单的方法，所有链路的成本都等于。这样，它总是试图寻找跳数最少的路径。有效的距离范围是从1到。这也限制了RIP只能在相当小规模的网络上运行。

  • 第3题：

    What are some of the characteristics of the OSPF routing protocol?（）

    • A、It confines network instability to a single area of network.
    • B、It increases the routing overhead of the network
    • C、It supports VLSM
    • D、It routes between Autonomous Systems.
    • E、It allows extensive control of routing updates
    • F、None of the above

    正确答案:A,C,E

  • 第4题：

    A routing protocol is required that supports: 1)routing update authentication 2)an addressing scheme that conserves IP addresses 3)multiple vendors 4)a network with over 50 routers Which routing protocol fulfills these requirements（）。

    • A、RIPv1
    • B、RIPv2
    • C、EIGRP
    • D、OSPF

    正确答案:D

  • 第5题：

    Which routing protocol best fits these requirements？（） - Supported by multiple router vendors  - Requires minimum router CPU and memory resources  - Uses a simple routing metric  - Supports manual or automatic route summarization

    • A、 EIGRP
    • B、 OSPF
    • C、 IS-IS
    • D、 RIPv2

    正确答案:D

  • 第6题：

    When implementing MPLS VPNs between CE and PE routers, which of these statements is correct? （）

    • A、If using IS-IS as the PE-CE routing protocol, no redistribution is required.
    • B、If using static routes between the CE and PE routers, no redistribution of other VPN routes is required.
    • C、If the PE-CE protocol is not BGP, redistribution of other VPN routes from MP-BGP is required.
    • D、If RIP is the routing protocol that is used between the PE-CE routers, no redistribution is required, but any other protocol will require redistribution.
    • E、If using OSPF or EIGRP as the PE-CE routing protocol, redistribution is not required, but any other protocol or static route will require redistribution.

    正确答案:C

  • 第7题：

    Which routing protocol supports a flexible area structure using routing levels one and two?（）

    • A、OSPF
    • B、EIGRP
    • C、IS-IS
    • D、BGP

    正确答案:C

  • 第8题：

    Which two are NOT characteristics of the OSPF routing protocol?（）

    • A、It confines network instability to a single area of network.
    • B、It increases the routing overhead of the network
    • C、It supports VLSM
    • D、It routes between Autonomous Systems.
    • E、It allows extensive control of routing updates

    正确答案:B,D

  • 第9题：

    多选题
    Which statements are true regarding classless routing protocols?（）
    A

    The use of discontiguous subnets is not allowed

    B

    The use of variable length subnet masks is permitted

    C

    RIP v1 is a classless routing protocol

    D

    IGRP supports classless routing within the same autonomous system

    E

    RIP v2 supports classless routing


    正确答案： B,D
    解析： 暂无解析

  • 第10题：

    单选题
    When EIGRP is used as the PE-CE routing protocol which of these statements is correct?（）
    A

    EIGRP can be used only as the PE-CE routing protocol if the PE and CE routers are in the same AS

    B

    Other EIGRP AS routes are automatically advertised to the CE router and do not require a redistribution configuration command to be configured

    C

    Unlike other routing protocols that are used between PE and CE routers, EIGRP supports backdoor links

    D

    Configure of the VPN is only required on the PE router


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    You need to implement the use of a routing protocol that meets the following requirements: 1. Converges quickly 2. Supports VLSM, CIDR, IP, and IPX. 3. Uses minimal bandwidth for routing updates. Which one of the following routing protocols would be the best choice?（）
    A

    RIPv1

    B

    RIPv2

    C

    IGRP

    D

    OSPF

    E

    EIGRP


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    Routing convergence time is which of the following？（）
    A

    Time required for a VPN connection to occur

    B

    Time required by protocols to update their forwarding tables after changes have occurred

    C

    Time required for an IDS to detect suspicious software

    D

    Time required by switch ports to update their link status and transition to the forwarding state


    正确答案： B
    解析： 暂无解析

  • 第13题：

    One of the most widely used routing protocols in IP networks is the Routing Information Protocol（RIP）。RIP is the canonical example of a routing protocol built on the（ ）algorithm.Routing protocols in internetworks differ slightly from the idealized graph model.In an internetwork,the goal of the routers to forward packets to various（ ）.
    Routers running RIP send their advertisement about cost every（ ）seconds.A router also sends an update message whenever an update from another router causes it to change its routing table.
    It is possible to use a range of different metrics or costs for the links in a routing protocol.RIP takes the simplest approach,with all link costs being equal（ ）。Thus it always tries to find the minimum hop route.Valid distances are 1 through（请作答此空）。This also limits RIP to running on fairly small networks.

    A.6
    B.10
    C.15
    D.16

    答案：C
    解析：
    IP网络中广泛使用的路由协议之一是路由信息协议（RIP）。RIP是基于路由算法的路由协议。网络中的路由协议与理想的图算法存在少量的差异。在互联网中，路由器的目的是将数据包转发给不同的。
    运行RIP协议的路由器每秒广播一次路由信息，另外，每当路由器收到其他路由器的更新消息而导致其路由表变化时，就会发送更新消息。
    路由协议使用不同的度量或成本来建立连接是可能的。RIP采用了最简单的方法，所有链路的成本都等于。这样，它总是试图寻找跳数最少的路径。有效的距离范围是从1到。这也限制了RIP只能在相当小规模的网络上运行。

  • 第14题：

    One of the most widely used routing protocols in IP networks is the Routing Information Protocol（RIP）。RIP is the canonical example of a routing protocol built on the（ ）algorithm.Routing protocols in internetworks differ slightly from the idealized graph model.In an internetwork,the goal of the routers to forward packets to various（ ）.
    Routers running RIP send their advertisement about cost every（ ）seconds.A router also sends an update message whenever an update from another router causes it to change its routing table.
    It is possible to use a range of different metrics or costs for the links in a routing protocol.RIP takes the simplest approach,with all link costs being equal（请作答此空）。Thus it always tries to find the minimum hop route.Valid distances are 1 through（ ）。This also limits RIP to running on fairly small networks.

    A.1
    B.15
    C.16
    D.length of the link

    答案：A
    解析：
    参考译文
    IP网络中广泛使用的路由协议之一是路由信息协议（RIP）。RIP是基于路由算法的路由协议。网络中的路由协议与理想的图算法存在少量的差异。在互联网中，路由器的目的是将数据包转发给不同的。
    运行RIP协议的路由器每秒广播一次路由信息，另外，每当路由器收到其他路由器的更新消息而导致其路由表变化时，就会发送更新消息。
    路由协议使用不同的度量或成本来建立连接是可能的。RIP采用了最简单的方法，所有链路的成本都等于。这样，它总是试图寻找跳数最少的路径。有效的距离范围是从1到。这也限制了RIP只能在相当小规模的网络上运行。

  • 第15题：

    You need to implement the use of a routing protocol that meets the following requirements: 1. Converges quickly 2. Supports VLSM, CIDR, IP, and IPX. 3. Uses minimal bandwidth for routing updates. Which one of the following routing protocols would be the best choice?（）

    • A、RIPv1
    • B、RIPv2
    • C、IGRP
    • D、OSPF
    • E、EIGRP

    正确答案:E

  • 第16题：

    Intermediate system to intermediate system (IS - IS), is a protocol used by network devices (routers) to determine the best way to forward datagrams through a packet - switched network, a process called routing. Which three attributes are of the IS - IS routing protocol? （）

    • A、supports VLSM
    • B、link - state routing protocol
    • C、operati on is similar to BGP
    • D、supports two routing levels within an autonomous system

    正确答案:A,B,D

  • 第17题：

    The routers named Testking1 and Testking2 are both configured with RIP only.What will happen in the event of Testking1 receiving a routing update that contains a higher cost path to a network already in its routing table?（）

    • A、The update information will be added to the existing routing table.
    • B、The update information will replace the existing routing table entry.
    • C、The update will be ignored and thus no further action will occur.
    • D、The existing routing table entry will be purged from the routing table and all routers will attempt convergence.

    正确答案:C

  • 第18题：

    Which statements are true regarding classless routing protocols?（）

    • A、The use of discontiguous subnets is not allowed
    • B、The use of variable length subnet masks is permitted
    • C、RIP v1 is a classless routing protocol
    • D、IGRP supports classless routing within the same autonomous system
    • E、RIP v2 supports classless routing

    正确答案:B,E

  • 第19题：

    Which of the following statements are correct in regard to classless routing protocols?（）

    • A、Discontiguous subnets are not allowed.
    • B、Variable length subnet masks are allowed.
    • C、RIP v1 is a classless routing protocol.
    • D、IGRP supports classless routing within the same autonomous system.
    • E、RIP v2 supports classless routing.

    正确答案:B,E

  • 第20题：

    单选题
    Which routing protocol supports a flexible area structure using routing levels one and two?（）
    A

    OSPF

    B

    EIGRP

    C

    IS-IS

    D

    BGP


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    Which routing protocol supports a flexible area structure using routing levels one and two？（）
    A

     OSPF

    B

     EIGRP

    C

     IS-IS

    D

     BGP


    正确答案： D
    解析： 暂无解析

  • 第22题：

    单选题
    A routing protocol is required that supports: 1)routing update authentication 2)an addressing scheme that conserves IP addresses 3)multiple vendors 4)a network with over 50 routers Which routing protocol fulfills these requirements（）。
    A

    RIPv1

    B

    RIPv2

    C

    EIGRP

    D

    OSPF


    正确答案： D
    解析： 暂无解析

  • 第23题：

    多选题
    What are some of the characteristics of the OSPF routing protocol?（）
    A

    It confines network instability to a single area of network.

    B

    It increases the routing overhead of the network

    C

    It supports VLSM

    D

    It routes between Autonomous Systems.

    E

    It allows extensive control of routing updates

    F

    None of the above


    正确答案： D,B
    解析： 暂无解析

  • 第24题：

    多选题
    Which two are NOT characteristics of the OSPF routing protocol?（）
    A

    It confines network instability to a single area of network.

    B

    It increases the routing overhead of the network

    C

    It supports VLSM

    D

    It routes between Autonomous Systems.

    E

    It allows extensive control of routing updates


    正确答案： B,C
    解析： 暂无解析

相关内容