Refer to the exhibt.Host A has tested connectivity to a remote network.What is the default gateway for host A?()A.172.16.182.1B.192.168.1.1C.10.16.176.1D.192.168.1.6

题目
Refer to the exhibt.Host A has tested connectivity to a remote network.What is the default gateway for host A?()

A.172.16.182.1

B.192.168.1.1

C.10.16.176.1

D.192.168.1.6

相似考题

1.How do you verify connectivity between the default gateway and a WX device?()A. Check the WX device remote interface and verify that the status is up.B. From the WX device, ping the default gateway to make sure it is reachable.C. In WebView, check the service tunnel status under Compression > Basic > Endpoints.D. In WebView, check the remote routes under Compression > Advanced > Remote Routes.

2.Refer to the exhibit. Which value will be configured for Default Gateway of the Local Area Connection?()A.10.0.0.0B.10.0.0.254C.192.223.129.0D.192.223.129.254

3. While troubleshooting a connectivity issue from a PC you obtain the following information: Local PC IP address: 190.0.3.35/24 Default Gateway: 190.0.3.1 Remote Server: 190.0.5.250/24 You then conduct the following tests from the local PC: Ping 127.0.0.1 - Unsuccessful Ping 190.0.3.35 - Successful Ping 190.0.3.1 - Unsuccessful Ping 190.0.5.250 - Unsuccessful What is the underlying cause of this problem?（）A、TCP/IP not correctly installedB、Local physical layer problemC、NIC not functioningD、Remote physical layer problem

4.Refer to the exhibit.The network administrator normally establishes a telnet session with the switch from host A.However,host A is unavailable.The administrator′s attempt to the switch from host B fails,but pings to the other two hosts are successful.what is the issue?（）A.Host B and the switch need to be in the same subnet.B.The switch needs and appropriate default gateway assigned.C.The switch interface connected to the router is down.D.Host B need to be assigned an IP address in vlan 1.E.The switch interfaces need the appropriate IP addresses assigned.

参考答案和解析
参考答案：A
更多“Refer to the exhibt.Host A has tested connectivity to a remote network.What is the default gateway for host A?() ”相关问题

  • 第1题：

    While troubleshooting a connectivity issue from a PC you obtain the following information: Local PC IP address: 10.0.0.35/24 Default Gateway: 10.0.0.1 Remote Sever: 10.5.75.250/24 You then conduct the following tests from the local PC: Ping 127.0.0.1 – Successful Ping 10.0.0.35 – Successful Ping 10.0.0.1 – Unsuccessful Ping 10.5.75.250 – Unsuccessful What is the underlying cause of this problem?（）

    • A、A remote physical layer problem exists.
    • B、The host NIC is not functioning.
    • C、TCP/IP has not been correctly installed on the host.
    • D、A local physical layer problem exists.

    正确答案:D

  • 第2题：

    A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?（）

    • A、The default gateway is configured on a different subnet form this host.
    • B、The host is a member of the fifth usable subnet of the 192.168.16.0 network.
    • C、The subnetwork address for this host is 192.168.16.160/28.
    • D、The address of the next higher subnet is 192.168.16.192.
    • E、The address of the router interface that is attached to this subnetwork is 192.168.16.190.
    • F、There are 60 usable host addresses on this subnet.

    正确答案:B,D,E

  • 第3题：

    You are a systems administrator and you are about to assign static IP addresses to various servers on your network. For the network 192.168.20.24/29 the router is assigned to the first usable host address, while the last usable host address goes to your Sales server. Which one of the following commands would you enter into the IP properties box of the sales server?（）

    • A、IP address: 192.168.20.14 Subnet Mask: 255.255.255.248 Default Gateway:192.168.20.9
    • B、IP address: 192.168.20.254 Subnet Mask: 255.255.255.0 Default Gateway:192.168.20.1
    • C、IP address: 192.168.20.30 Subnet Mask 255.255.255.248 Default Gateway:192.168.20.25
    • D、IP address: 192.168.20.30 Subnet Mask 255.255.255.240 Default Gateway:192.168.20.17
    • E、IP address: 192.168.20.30 Subnet Mask 255.255.255.240 Default Gateway:192.168.20.25

    正确答案:C

  • 第4题：

    An administrator issues the command ping 127.0.0.1 from the command line prompt on a PC.If a reply is received, what does this confirm?（）

    • A、The PC has connectivity with a local host.
    • B、The PC has connectivity with a Layer 3 device.
    • C、The PC has a default gateway correctly configured
    • D、The PC has connectivity up to Layer 5 of the OSI model
    • E、The PC has the TCP/IP protocol stack correctly installed.

    正确答案:E

  • 第5题：

    Two sites are using a multisite centralized call processing model. The voice gateway on the remote branch has lost IP connectivity to its Cisco CallManager server. Which feature enables the remote gateway to take the role of the call agent during the WAN failure？ （）

    • A、automated alternate routing （AAR）
    • B、Cisco CallManager Attendant Console
    • C、real-time protocol （RTP）
    • D、Survivable Remote Site Telephony （SRST）

    正确答案:D

  • 第6题：

    Your company has a load-balanced Remote Desktop Session Host （RD Session Host） cluster. You are configuring the Remote Desktop Gateway （RD Gateway） role service on servers that run Windows Server 2008 R2. You need to centralize the storage of Remote Desktop connection authorization policies （RD CAPs）. Which two actions should you perform？（）

    • A、Install the Network Policy Server role service.
    • B、Install the Distributed File System role service.
    • C、Configure the RD Gateway servers to use a local RD CAP store.
    • D、Configure the RD Gateway servers to use a remote RD CAP store.

    正确答案:A,D

  • 第7题：

    单选题
    Refer to the exhibt.Host A has tested connectivity to a remote network.What is the default gateway for host A?（）
    A

    172.16.182.1

    B

    192.168.1.1

    C

    10.16.176.1

    D

    192.168.1.6


    正确答案： B
    解析： 暂无解析

  • 第8题：

    单选题
    While troubleshooting a connectivity issue from a PC you obtain the following information: Local PC IP address: 10.0.0.35/24 Default Gateway: 10.0.0.1 Remote Sever: 10.5.75.250/24 You then conduct the following tests from the local PC: Ping 127.0.0.1 – Successful Ping 10.0.0.35 – Successful Ping 10.0.0.1 – Unsuccessful Ping 10.5.75.250 – Unsuccessful What is the underlying cause of this problem?（）
    A

    A remote physical layer problem exists.

    B

    The host NIC is not functioning.

    C

    TCP/IP has not been correctly installed on the host.

    D

    A local physical layer problem exists.


    正确答案： D
    解析： 暂无解析

  • 第9题：

    单选题
    An administrator must assign static IP addresses to the servers in a network.For network 192.168.20.24/29, the router is assigned the first usable host address while the sales server is given the last usable host address. Which of the following should be entered into the IP propertied box for the sales server?（）
    A

    IP address:192.168.20.14 Subnet Mask:255.255.255.248 Default Gateway:192.168.20.9

    B

    IP address:192.168.20.254 Subnet Mask:255.255.255.0 Default Gateway:192.168.20.1

    C

    IP address:192.168.20.30 Subnet Mask:255.255.255.248 Default Gateway:192.168.20.25

    D

    IP address:192.168.20.30 Subnet Mask:255.255.255.240 Default Gateway:192.168.20.17

    E

    IP address:192.168.20.30 Subnet Mask:255.255.255.240 Default Gateway:192.168.20.25


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. All client computers run Windows 7. Remote client computers are not members of the domain. Your environment includes a Remote Desktop Gateway (RD Gateway) server. You install an application on a Remote Desktop Session Host (RD Session Host) server. You need to ensure that remote users can run the application. What should you do？（）
    A

    On each remote client computer, configure the Remote Desktop Connection client to connect to the RD Gateway server.

    B

    On each remote client computer, configure the Remote Desktop Connection client to connect without warning if server authe ntication fails.

    C

    On the RD Session Host server, configure the Remote Desktop Connection client to connect to the RD Gateway server.

    D

    On the RD Gateway server, add the Guests local group to the Remote Desktop Users local group.


    正确答案： C
    解析： 暂无解析

  • 第11题：

    Refer to the exhibt.Host A has tested connectivity to a remote network.What is the default gateway for host A?（）

    • A、172.16.182.1
    • B、192.168.1.1
    • C、10.16.176.1
    • D、192.168.1.6

    正确答案:A

  • 第12题：

    For a technician to test network connectivity to a remote host on a Unix Server which of the following commands should they run？（）

    • A、 IPCONFIG
    • B、 PING
    • C、 ARP
    • D、 IFCONFIG

    正确答案:B

  • 第13题：

    An administrator issues the command ping 127.0.0.1 from the command line prompt on a PC. If a reply is received, what does this confirm（）。

    • A、The PC has connectivity with a local host.
    • B、The PC has connectivity with a Layer 3 device.
    • C、The PC has a default gateway correctly configured.
    • D、The PC has connectivity up to Layer 5 of the OSI model.
    • E、The PC has the TCP/IP protocol stack correctly installed.

    正确答案:E

  • 第14题：

    A technician is troubleshooting a host connectivity problem. The host is unable to ping a server connected to Switch_A. Based on the results of the testing, what could be the problem（）。

    • A、A remote physical layer problem exists.
    • B、The host NIC is not functioning.
    • C、TCP/IP has not been correctly installed on the host.
    • D、A local physical layer problem exists.

    正确答案:D

  • 第15题：

    The sysdumpdev command can be used to configure remote dump devices. Which of the following conditions is NOT used for a remote dump device configuration?（）

    • A、The local and the remote host must have Transmission Control Protocol/Internet Protocol (TCP/IP) installed and configured. 
    • B、The remote host must support NFS. 
    • C、The remote host must have an NFS exported directory defined such that the local host has read and write permissions to the dump file on the remote host. 
    • D、The remote host can be the same as the local host.

    正确答案:D

  • 第16题：

    Your company has an Active Directory Domain Services (AD DS) domain. All servers run Windows Server 2008 R2. All client computers run Windows 7. You have a Remote Desktop Session Host (RD Session Host) server and a Remote Desktop Gateway (RD Gateway) server. You use Windows Firewall on your servers. You need to ensure that users can connect to their virtual desktops. What should you do？（）

    • A、Create a Windows Firewall inbound rule for port 443 on the RD Gateway server.
    • B、Create a Windows Firewall inbound rule for port 443 on the RD Session Host server.
    • C、Create a Windows Firewall inbound rule for port 3389 on the RD Gateway server.
    • D、Create a Windows Firewall inbound rule for port 3389 on the RD Session Host server.

    正确答案:A,D

  • 第17题：

    单选题
    A technician is troubleshooting a host connectivity problem. The host is unable to ping a server connected to Switch_A. Based on the results of the testing, what could be the problem（）。
    A

    A remote physical layer problem exists.

    B

    The host NIC is not functioning.

    C

    TCP/IP has not been correctly installed on the host.

    D

    A local physical layer problem exists.


    正确答案： D
    解析： 暂无解析

  • 第18题：

    单选题
    An administrator issues the command ping 127.0.0.1 from the command line prompt on a PC. If a reply is received, what does this confirm（）。
    A

    The PC has connectivity with a local host.

    B

    The PC has connectivity with a Layer 3 device.

    C

    The PC has a default gateway correctly configured.

    D

    The PC has connectivity up to Layer 5 of the OSI model.

    E

    The PC has the TCP/IP protocol stack correctly installed.


    正确答案： E
    解析： 暂无解析

  • 第19题：

    单选题
    How do you verify connectivity between the default gateway and a WX device?（）
    A

    Check the WX device remote interface and verify that the status is up.

    B

    From the WX device, ping the default gateway to make sure it is reachable.

    C

    In WebView, check the service tunnel status under Compression > Basic > Endpoints.

    D

    In WebView, check the remote routes under Compression > Advanced > Remote Routes.


    正确答案： C
    解析： 暂无解析

  • 第20题：

    多选题
    A network host is configured as follows: Host IP address: 192.168.16.183 Subnet mask: 255.255.255.224 Default gateway: 192.168.16.190 Which of the following statements describe the network to which this host is attached?（）
    A

    The default gateway is configured on a different subnet form this host.

    B

    The host is a member of the fifth usable subnet of the 192.168.16.0 network.

    C

    The subnetwork address for this host is 192.168.16.160/28.

    D

    The address of the next higher subnet is 192.168.16.192.

    E

    The address of the router interface that is attached to this subnetwork is 192.168.16.190.

    F

    There are 60 usable host addresses on this subnet.


    正确答案： B,C
    解析： 暂无解析

相关内容