单选题A customer has an LPAR with 4 dedicated cores on a POWER7 server with SMT4 enabled. How many logical processors are presented to an application running on this LPAR?（）A 4B 8C 16D 32

题目
单选题
A customer has an LPAR with 4 dedicated cores on a POWER7 server with SMT4 enabled. How many logical processors are presented to an application running on this LPAR?（）
A

4

B

8

C

16

D

32

相似考题

1.A client has a temporary deployment of a new static application that needs to run for a short period of time and is not going to change.How can this deployment be achieved with a minimum of effort and time?（）A.Run a system WPAR and deploy the application.B.Create a new LPAR and deploy the application.C.Create an application WPAR to deploy the application.D.Create an LPAR hosted by a VIO server and deploy the application.

2.How many WLANs can a Cisco Aironet 1242 in H-REAP mode support when actively connected toa wireless controller？（）A、4B、8C、16D、32

3. A system administrator is creating four LPARs on a Power 550. The Power 550 has 64GB of memoryinstalled and 32GB activated. The system administrator sets the minimum dedicated memory to 8GB in the profile for each LPAR. After activating three LPARs, he is not able to activate the fourth LPAR. What is the likely cause of the problem?（）A、The Power 550 is licensed for three LPARs only.B、There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. A faulty memory DIMM is detected in the POWER5 550.C、There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The HMC reserves some memory to perform logical partition tasks.D、There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The hypervisor reserves some memory to perform logical partition tasks.

4.How many WLANs can a Cisco Aironet 1242 in H-REAP mode support when actively connected to awireless controller？（）A、4B、8C、16D、32

更多“单选题A customer has an LPAR with 4 dedicated cores on a POWER7 server with SMT4 enabled. How many logical processors are presented to an application running on this LPAR?（）A 4B 8C 16D 32”相关问题

  • 第1题：

    In order to support Live Partition Mobility (LPM) for a given LPAR between two Power servers, which type of backing device should be chosen for the storage devices presented from the VIO server to the LPAR?（）

    • A、LUN-backed devices
    • B、File-backed devices
    • C、Logical volume-backed devices
    • D、Network Filesystem-backed （NFS） devices

    正确答案:A

  • 第2题：

    A customer is evaluating PowerVM and VMware to run a data warehouse application. Which feature of PowerVM should be highlighted as a differentiator?（）

    • A、PowerVM offers partition mobility.
    • B、PowerVM can virtualize network and SAN resources.
    • C、PowerVM supports multiple operating systems running concurrently.
    • D、PowerVM allows an LPAR to use activated cores and memory without limitation.

    正确答案:D

  • 第3题：

    A customer has an LPAR with 4 dedicated cores on a POWER7 server with SMT4 enabled. How many logical processors are presented to an application running on this LPAR?（）

    • A、4
    • B、8
    • C、16
    • D、32

    正确答案:C

  • 第4题：

    A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）

    • A、In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.
    • B、In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.
    • C、In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.
    • D、In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.

    正确答案:C

  • 第5题：

    A customer would like to configure an uncapped LPAR so that it can use 2 to 8 cores depending on the workload characteristics.  With SMT4 enabled, what is the least amount of processing resources which can be configured for the LPAR?（）

    • A、8 desired processing units and 8 desired virtual processors
    • B、2 desired processing units and 8 desired virtual processors
    • C、8 desired processing units and 32 desired virtual processors
    • D、2 desired processing units and 32 desired virtual processors

    正确答案:B

  • 第6题：

    A client has a temporary deployment of a new static application that needs to run for a short period of time and is not going to change. How can this deployment be achieved with a minimum of effort and time？（）  

    • A、Run a system WPAR and deploy the application.
    • B、Create a new LPAR and deploy the application.
    • C、Create an application WPAR to deploy the application.
    • D、Create an LPAR hosted by a VIO server and deploy the application.

    正确答案:C

  • 第7题：

    单选题
    A client has a temporary deployment of a new static application that needs to run for a short period of time and is not going to change. How can this deployment be achieved with a minimum of effort and time?（）
    A

    Run a system WPAR and deploy the application.

    B

    Create a new LPAR and deploy the application.

    C

    Create an application WPAR to deploy the application.

    D

    Create an LPAR hosted by a VIO server and deploy the application.


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）
    A

    The LPAR Configuration backup is corrupt

    B

    The LPAR Configuration has been altered using DLPAR

    C

    The LPAR Configuration backup was performed on a different HMC

    D

    The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    A customer has an LPAR with 4 dedicated cores on a POWER7 server with SMT4 enabled. How many logical processors are presented to an application running on this LPAR?（）
    A

    4

    B

    8

    C

    16

    D

    32


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    A system administrator has a pSeries p5-520 2-way with AIX 5L V5.2 with a peak utilization of 50%. There is a request to add a new Web server for a small department. Which of the following solutions is the best fit for this environment？（）
    A

    Create a dedicated LPAR for the existing workload and a Micro-Partition for the Web server. 

    B

    Create a dedicated LPAR for the existing workload and a dedicated LPAR for the Web server.

    C

    Create a Micro-Partition for the existing workload and a dedicated LPAR for the Web server.

    D

    Create a Micro-Partition for the existing workload and a Micro-Partition for the Web server.


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    A user has an application server LPAR with a physical Ethernet adapter. They want to have a database LPAR also connected to the application LPAR via virtual Ethernet. Their security policies require a firewall between the application LPAR and database LPAR. Which of the following virtual Ethernet configurations satisfies the customer’s requirements？（）
    A

    The application server，firewall，and database server on the same VLAN

    B

    The application server and firewall on one VLAN，and the database server on a second VLAN

    C

    The application server on one VLAN，and the database server and firewall on a second VLAN

    D

    The application server and firewall on one VLAN，and the firewall and database server on a second VLAN


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    A POWER6 595 LPAR has two dedicated processors. The LPAR is active and running AIX 6.1. What must be done to donate any unusedprocessing capacity to the shared processor pool?（）
    A

    In the HMC Properties, select the options to allow processor sharing when the partition is inactive and active.

    B

    In the LPAR Properties, select the options to allow processor sharing when the partition is inactive and active.

    C

    In the LPAR Profile Properties, select the options to allow processor sharing when the partition is inactive and active.

    D

    In the 595 Managed System Properties, select the options to allow processor sharing when partitions are inactive and active.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?（）

    • A、Use AIX 5.3 which supports micro-partitioning for both the test and training LPARS
    • B、Use DLPAR to move resources from the test LPAR to training when training is active
    • C、Install Partition Load Manager to share resources between the test and training environments
    • D、Install Advanced Power Virtualization and then use micro-partitioning for both the test and  training LPARs

    正确答案:D

  • 第14题：

    An administrator is creating a new logical partition (LPAR) with 6 virtual processors and 4 processing units. This LPAR must have the highest priority in the shared processor pool. Which weight should be assigned to this LPAR?（）

    • A、 0
    • B、 1
    • C、 255
    • D、 256

    正确答案:C

  • 第15题：

    Companycom wants the application server LPAR to communicate with the database LPAR on a p5 590 without using network adapters. What does the customer need to install?（）

    • A、VIO Server
    • B、AIX 5.2 ML4
    • C、Shared Ethernet Adapter
    • D、AIX 5.3 with Advanced Power Virtualization

    正确答案:D

  • 第16题：

    A user has an application server LPAR with a physical Ethernet adapter. They want to have a database LPAR also connected to the application LPAR via virtual Ethernet. Their security policies require a firewall between the application LPAR and database LPAR. Which of the following virtual Ethernet configurations satisfies the customer’s requirements？（）

    • A、The application server，firewall，and database server on the same VLAN
    • B、The application server and firewall on one VLAN，and the database server on a second VLAN
    • C、The application server on one VLAN，and the database server and firewall on a second VLAN
    • D、The application server and firewall on one VLAN，and the firewall and database server on a second VLAN

    正确答案:D

  • 第17题：

    System configurations on the HMC have been backed up correctly. After a restore, the partitions are defined with different characteristics than the running systems. What is the most probable cause of this problem?（）

    • A、The LPAR Configuration backup is corrupt
    • B、The LPAR Configuration has been altered using DLPAR
    • C、The LPAR Configuration backup was performed on a different HMC
    • D、The LPAR Configuration has been altered through the Advanced System Management Interface （ASMI） on the server after the backup was performed

    正确答案:B

  • 第18题：

    单选题
    An administrator analyzes a poorly performing system and suspects that the issue is related to CPU resource. Upon reviewing output of vmstat, the administrator is concerned with the values in the ‘pc’ and ‘ec’ columns. Which definition describes these two headings?（）
    A

    'pc' refers to the number of physical processors consumed, while 'ec' refers to the percentage of entitled capacity consumed.

    B

    'pc' refers to the 'physical CPUs' and lists how many are left un-allocated, while ec' refers to the 'entitled CPUs' and lists what amount is currently allocated to the LPAR.

    C

    'pc' refers to the 'processor count' and reflects how many CPUs are allocated to the LPAR, while 'ec ' refers to the 'extra capacity' and lists how much above the LPAR entitlement is being consumed.

    D

    'pc' refers to 'processor cards' and reflects how many MCM modules are actually being used by this LPAR, while 'ec' refers to the 'entitled CPUs'and lists what amount is currently allocated to the LPAR.


    正确答案： A
    解析： 暂无解析

  • 第19题：

    单选题
    A customer would like to configure an uncapped LPAR so that it can use 2 to 8 cores depending on the workload characteristics. With SMT4 enabled, what is the least amount of processing resources which can be configured for the LPAR?（）
    A

    8 desired processing units and 8 desired virtual processors

    B

    2 desired processing units and 8 desired virtual processors

    C

    8 desired processing units and 32 desired virtual processors

    D

    2 desired processing units and 32 desired virtual processors


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    Companycom wants the application server LPAR to communicate with the database LPAR on a p5 590 without using network adapters. What does the customer need to install?（）
    A

    VIO Server

    B

    AIX 5.2 ML4

    C

    Shared Ethernet Adapter

    D

    AIX 5.3 with Advanced Power Virtualization


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    A customer is evaluating PowerVM and VMware to run a data warehouse application. Which feature of PowerVM should be highlighted as a differentiator?（）
    A

    PowerVM offers partition mobility.

    B

    PowerVM can virtualize network and SAN resources.

    C

    PowerVM supports multiple operating systems running concurrently.

    D

    PowerVM allows an LPAR to use activated cores and memory without limitation.


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    A system administrator is creating four LPARs on a Power 550. The Power 550 has 64GB of memoryinstalled and 32GB activated. The system administrator sets the minimum dedicated memory to 8GB in the profile for each LPAR. After activating three LPARs, he is not able to activate the fourth LPAR. What is the likely cause of the problem?（）
    A

    The Power 550 is licensed for three LPARs only.

    B

    There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. A faulty memory DIMM is detected in the POWER5 550.

    C

    There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The HMC reserves some memory to perform logical partition tasks.

    D

    There is not enough memory to meet the minimum dedicated memory requirement for the fourth LPAR. The hypervisor reserves some memory to perform logical partition tasks.


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    An administrator is creating a new logical partition (LPAR) with 6 virtual processors and 4 processing units. This LPAR must have the highest priority in the shared processor pool. Which weight should be assigned to this LPAR?（）
    A

     0

    B

     1

    C

     255

    D

     256


    正确答案： C
    解析： 暂无解析

  • 第24题：

    单选题
    Companycom has just purchased a p5 570 with AIX 5.3. The customer would like to add a training LPAR to the system, but no processors are available. All of the partitions are using dedicated resources. The test LPAR is using one processor and has a 90% CPU idle rate. What can be done to setup this training LPAR quickly without disabling their current environment?（）
    A

    Use AIX 5.3 which supports micro-partitioning for both the test and training LPARS

    B

    Use DLPAR to move resources from the test LPAR to training when training is active

    C

    Install Partition Load Manager to share resources between the test and training environments

    D

    Install Advanced Power Virtualization and then use micro-partitioning for both the test and  training LPARs


    正确答案： D
    解析： 暂无解析

相关内容