Install a high gain antenna focused towards the office wall.
Run CAT5e cable to all of the rooms that have poor signal strength.
Install a wireless repeater at the far end of the house.
Install a second wired router in the far end of the house.
第1题:
A client states they are receiving poor signal strength on their wireless Internet connection. Which of the following is MOST likely causing the interference?()
第2题:
Which signal and noise values will result in the best phone communication with an access point?()
第3题:
Which signal and noise values will result in the best phone communication with an access point?()
第4题:
Which of the following is the MOST likely cause of a low wireless signal after an internal wireless adapter on a laptop was replaced?()
第5题:
A customer has a wireless router installed in their home office. The customer is having issues with signal strength at the opposite end of the house. Which of the following is the BEST option to increase the signal strength?()
第6题:
A customer’s laptop display panel assembly had just been replaced. The customer notices that the wireless network adapter is enabled but detecting a weak signal. Which of the following is the MOST likely cause?()
第7题:
average signal strength that is greater than -67 dBi
cell overlap of 15 to 20 percent
uneven wireless coverage
absence of coverage holes
第8题:
It indicates that the radio of the client adapter is disabled
It indicates that the client adapter is not associated to an access point or another client
It indicates that the client adapter is associated to an access point or another client, but the user is not EAP authenticated
It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is excellent or good
It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is fair
It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is poor
第9题:
It indicates that the radio of the client adapter is disabled.
It indicates that the client adapter is not associated to an access point or another client.
It indicates that the client adapter is associated to an access point or another client, but the user is not EAP authenticated.
It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is excellent or good.
It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is fair.
It indicates that the client adapter is associated to an access point or another client, that the user is authenticated if the client adapter is configured for EAP authentication, and that the signal strength is poor.
第10题:
signal strength 5dBm
signal strength 6dBm
noise level 4dBm
noise level 5dBm
第11题:
IBM ServerProven site
System x Reference Library (xRef)
COG Compatibility List
Hardware Compatibility List (HCL)
第12题:
Cordless phones
Drywall
Access points
Microwaves
Fluorescents lights
第13题:
What will cause wireless voice devices to perform poorly?()
第14题:
Which statement best describes the Cisco 2700 Location Appliance collection of location information for wireless devices?()
第15题:
You are the Cisco Network Designer in Cisco.com. Which signal and noise values will result in thebest phone communication with an access point?()
第16题:
The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine. Which of the following should a technician recommend?()
第17题:
A customer wants to expand their current storage environment, but has floor space for only two machine frames or two racks. Their environment consists of IBM SAN Volume Controllers and IBM DS4000 systems. The DS4000 systems are at end of lease. The customer wants the maximum number of disks possible in two frames. Which of the following solutions is best for this customer?()
第18题:
The wireless card needs to be replaced.
The antenna wires are not connected properly.
The wireless drivers need to be updated.
The display panel is defective.
第19题:
signal strength 46dBm, noise level 95dBm
signal strength 74dBm, noise level 94dBm
signal strength 68dBm, noise level 79dBm
signal strength 50dBm, noise level 56dBm
第20题:
all Wi-Fi devices on the WLAN send directly received signal strength indication (RSSI) information to the Cisco Wireless Location Appliance through SNMP
an AP collects RSSI information which is forwarded to wireless controllers through LWAPP. Wireless controllers forward aggregated RSSI to the location appliance through SNMP
the APs collect received signal strength indication (RSSI) information from all Wi-Fi devices and forward the information to the Cisco Wireless Location Appliance through the LWAPP
the Cisco WLAN controllers bypass the received signal strength indication (RSSI) information from all Wi-Fi devices to the Cisco Wireless Location Appliance through the LWAPP
第21题:
Signal strength 0dBm, noise level 6dBm
Signal strength 8dBm, noise level 9dBm
Signal strength 4 dBm, noise level 4 dBm
Signal strength 6dBm, noise level 5 dBm
第22题:
Clean the scanner glass on the distant machine.
Clean the scanner glass on the local machine.
Clean the printer head on the local machine.
Call the telephone company to increase the line signal level.
第23题:
The wireless card must be calibrated to the laptop.
The correct preshared encryption key must be installed to boost the signal.
The MAC address of the new wireless card will have to be added to the WAP to get the full signal.
The antenna wires for the wireless card were not attached.