单选题A Windows workstation is taking an excessive amount of time to load the desktop after login.Which of the following could be causing the issue?（）A BIOS on the system board needs to be updated.B The power supply is providing insufficient wattage.C The in

题目
单选题
A Windows workstation is taking an excessive amount of time to load the desktop after login.Which of the following could be causing the issue?（）
A

BIOS on the system board needs to be updated.

B

The power supply is providing insufficient wattage.

C

The incorrect video drivers are installed on the computer.

D

Too many startup applications are running.

相似考题

1.A technician receives an error message ‘inaccessible boot device’ on their monitor. Which of thefollowing components is causing the issue?()A. Hard disk drive failureB. NTLDR file is missingC. BIOS is corruptedD. System board failure

2.A Windows workstation is taking an excessive amount of time to load the desktop after login.Which of the following could be causing the issue?()A. BIOS on the system board needs to be updated.B. The power supply is providing insufficient wattage.C. The incorrect video drivers are installed on the computer.D. Too many startup applications are running.

3.Which of the following can occur if the maximum rated load is exceeded on an uninterruptible power supply (UPS)?()A. There is a fire hazard potential if a power outage occurs.B. The last system plugged into the UPS will not be provided any power.C. The UPS will draw more power from the circuit to compensate.D. The runtime of the UPS will be insufficient if a power outage occurs.

4.A user reports it takes a long time to load all applications and the hard drive LED is showing constant activity. Which of the following is MOST likely the issue?()A. The processor is faulty.B. The file system is fragmented.C. The modem drivers are corrupt.D. The power supply is faulty.

参考答案和解析
正确答案： B
解析： 暂无解析
更多“单选题A Windows workstation is taking an excessive amount of time to load the desktop after login.Which of the following could be causing the issue?（）A BIOS on the system board needs to be updated.B The power supply is providing insufficient wattage.C The in”相关问题

  • 第1题：

    A user reports the system runs fine for a few minutes and then freezes or locks up. Which of the following is the BEST cause of this issue?（）

    • A、Memory is bad or not seated.
    • B、Fans are failing.
    • C、Power supply needs to be replaced.
    • D、CD-ROM is faulty and needs to be replaced.

    正确答案:B

  • 第2题：

    A Windows workstation is taking an excessive amount of time to load the desktop after login.Which of the following could be causing the issue?（）

    • A、BIOS on the system board needs to be updated.
    • B、The power supply is providing insufficient wattage.
    • C、The incorrect video drivers are installed on the computer.
    • D、Too many startup applications are running.

    正确答案:D

  • 第3题：

    After receiving a message at startup stating that ‘One or more services failed to load at startup’,which of the following Windows utilities would a technician use to diagnose the issue?（）

    • A、Event Viewer
    • B、System Information
    • C、Scandisk
    • D、Dr. Watson

    正确答案:A

  • 第4题：

    A computer is redeployed after sitting in storage for a year and is now displaying the wrong date. Which of the following is the cause? （）

    • A、The computers BIOS is corrupt.
    • B、The computers operating system needs to be updated.
    • C、The computers CMOS battery has lost its charge.
    • D、The computers power supply is failing.

    正确答案:C

  • 第5题：

    After hardware upgrades have been installed, the technician boots the computer system. Nodisplay output is observed but a beeping is heard from the computer. Which of the following is the MOST likely issue?（）

    • A、Hard drive cables are not connected.
    • B、BIOS chips are not seated properly.
    • C、The power supply is not functioning.
    • D、Video card is not seated properly.

    正确答案:D

  • 第6题：

    After installing a second processor and corresponding heatsink into a server， an administrator notices that the new processor is not showing up during POST.  Which of the following could be the cause of this issue？（）

    • A、 The power supply is not sufficient to power the server.
    • B、 The voltage regulator module （VRM） was not installed.
    • C、 The IRQ setting was not set.
    • D、 The DMA setting was not set.

    正确答案:B

  • 第7题：

    A technician receives an error message ‘inaccessible boot device’ on their monitor. Which of thefollowing components is causing the issue?（）

    • A、Hard disk drive failure
    • B、NTLDR file is missing
    • C、BIOS is corrupted
    • D、System board failure

    正确答案:A

  • 第8题：

    单选题
    An administrator has just finished physically replacing the system board in a Windows domain controller. Which of the following must be done before booting the server back into Windows？（）
    A

    Update the time and date in the BIOS.

    B

    Update the firmware on the SCSI controller.

    C

    Update the firmware to the latest version.

    D

    Configure IPMI on the new board.


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    A Windows OS has failed to load after a successful power on self test. Which of the following steps will help troubleshoot the problem?（）
    A

    Change the time and date in the BIOS.

    B

    Replace the keyboard.

    C

    Check for media in the optical drive.

    D

    Add more RAM.


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    After installing a second processor and corresponding heatsink into a server， an administrator notices that the new processor is not showing up during POST.  Which of the following could be the cause of this issue？（）
    A

     The power supply is not sufficient to power the server.

    B

     The voltage regulator module （VRM） was not installed.

    C

     The IRQ setting was not set.

    D

     The DMA setting was not set.


    正确答案： D
    解析： 暂无解析

  • 第11题：

    单选题
    If a technician suspects that the voltage being delivered to a desktop computer’s power supply is insufficient or incorrect, which device should be used to determine the correct voltage?（）
    A

    A power supply tester

    B

    A multimeter

    C

    A loopback adapter

    D

    A cable tester


    正确答案： D
    解析： 暂无解析

  • 第12题：

    单选题
    Which of the following can occur if the maximum rated load is exceeded on an uninterruptible power supply (UPS)?（）
    A

    There is a fire hazard potential if a power outage occurs.

    B

    The last system plugged into the UPS will not be provided any power.

    C

    The UPS will draw more power from the circuit to compensate.

    D

    The runtime of the UPS will be insufficient if a power outage occurs.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    If a technician suspects that the voltage being delivered to a desktop computer’s power supply is insufficient or incorrect, which device should be used to determine the correct voltage?（）

    • A、A power supply tester
    • B、A multimeter
    • C、A loopback adapter
    • D、A cable tester

    正确答案:B

  • 第14题：

    A Windows OS has failed to load after a successful power on self test. Which of the following steps will help troubleshoot the problem?（）

    • A、Change the time and date in the BIOS.
    • B、Replace the keyboard.
    • C、Check for media in the optical drive.
    • D、Add more RAM.

    正确答案:C

  • 第15题：

    A company has had problems with their HVAC system being able to cool their datacenter as theyhave grown. Which of the following could BEST be used to help reduce the load on the HVACsystem?（）

    • A、Replacing the CAT5 cables with CAT6 cables
    • B、Replacing traditional racks with water cooled racks
    • C、Turning off non-critical application servers during non-business hours
    • D、Taking the second power supply out of non-critical servers

    正确答案:B

  • 第16题：

    A user reports it takes a long time to load all applications and the hard drive LED is showing constant activity. Which of the following is MOST likely the issue?（）

    • A、The processor is faulty.
    • B、The file system is fragmented.
    • C、The modem drivers are corrupt.
    • D、The power supply is faulty.

    正确答案:B

  • 第17题：

    An administrator has just finished physically replacing the system board in a Windows domain controller. Which of the following must be done before booting the server back into Windows?（）

    • A、Update the time and date in the BIOS.
    • B、Update the firmware on the SCSI controller.
    • C、Update the firmware to the latest version.
    • D、Configure IPMI on the new board.

    正确答案:A

  • 第18题：

    Which of the following can occur if the maximum rated load is exceeded on an uninterruptible power supply （UPS）？（）

    • A、 There is a fire hazard potential if a power outage occurs.
    • B、 The last system plugged into the UPS will not be provided any power.
    • C、 The UPS will draw more power from the circuit to compensate.
    • D、 The runtime of the UPS will be insufficient if a power outage occurs.

    正确答案:D

  • 第19题：

    单选题
    Which of the following will corrupt the BIOS？（）
    A

     Applying the BIOS settings in the incorrect order

    B

     Power being lost during the upgrade process

    C

     Installing the OS before applying the BIOS upgrade

    D

     Imaging the system after performing a BIOS upgrade


    正确答案： A
    解析： 暂无解析

  • 第20题：

    单选题
    A user reports it takes a long time to load all applications and the hard drive LED is showing constant activity. Which of the following is MOST likely the issue?（）
    A

    The processor is faulty.

    B

    The file system is fragmented.

    C

    The modem drivers are corrupt.

    D

    The power supply is faulty.


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    Emergency generator is installed on board mainly to （）
    A

    connect to the busbar when the load increasing

    B

    supply power specially to charging panel

    C

    be put into operation during the ship arriving at or leaving port

    D

    ensure the power supply to critical equipment after the main switchboard out of power


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    An administrator has just finished physically replacing the system board in a Windows domain controller.  Which of the following must be done before booting the server back into Windows？（）
    A

     Update the time and date in the BIOS.

    B

     Update the firmware on the SCSI controller.

    C

     Update the firmware to the latest version.

    D

     Configure IPMI on the new board.


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    A computer is redeployed after sitting in storage for a year and is now displaying the wrong date. Which of the following is the cause? （）
    A

    The computers BIOS is corrupt.

    B

    The computers operating system needs to be updated.

    C

    The computers CMOS battery has lost its charge.

    D

    The computers power supply is failing.


    正确答案： B
    解析： 暂无解析

相关内容