The rate of traffic is measured and compared to a configured policy.
Classification is used to differentiate traffic.
Traffic is marked and sent out according to priority.
Both can be applied to inbound and outbound traffic.
Both buffer traffic to ensure a predetermined traffic rate.
Both drop traffic that is above a predetermined traffic rate.
第1题:

A. FWSM routes traffic between the VLANs.
B. FWSM switches traffic between the VLANs.
C. Transparent mode is often called bump-in-the-wire mode.
D. Transparent mode firewall deployments are used most often in current designs.
E. Traffic routed between VLANs is subject to state tracking and other firewall configurable options.
第2题:
A. passively listens to network traffic
B. is an active device in the traffic path
C. has a permissive interface that is used to monitor networks
D. traffic arrives on one IPS interface and exits on another
第3题:
What are two purposes of a forwarding class?()
第4题:
What are two characteristics of dual-ring interconnect in SONET networks? ()(Choose two.)
第5题:
Which two characteristics are common between traffic policing and traffic shaping?()
第6题:
What are two characteristics of the SLB One-arm mode? ()
第7题:
What are two characteristics of dual-ring interconnect in SDH networks? ()
第8题:
An administrator is using a protocol analyzer to monitor traffic between two servers. However, the only traffic that appears is broadcast and traffic originating from the administrator's PC. Which of the following devices is the administrator plugged into? ()
第9题:
Which two configuration options must be present for IPv4 transit traffic to pass between the ge-0/0/0.0 andge-0/0/2.0 interfaces?()
第10题:
Users can define policy to control traffic flow between which two components? ()(Choose two.)
第11题:
It is not as common as bridge mode
The MSFC is not directly connected to the CSM
Outbound traffic from servers may need to be directed by PBR or CSNAT to the CSM
The SLB is moved to a position where selected inbound and outbound server traffic goesthrough the SLB
The CSM statically routes inbound server traffic to the aggregation switch FWSM, then to the connected server subnet
第12题:
The rate of traffic is measured and compared to a configured policy.
Classification is used to differentiate traffic.
Traffic is marked and sent out according to priority.
Both can be applied to inbound and outbound traffic.
Both buffer traffic to ensure a predetermined traffic rate.
Both drop traffic that is above a predetermined traffic rate.
第13题:

A. FWSM routes traffic between the VLANs.
B. FWSM switches traffic between the VLANs.
C. Routed mode is often called bump-in-the-wire mode.
D. Routed mode firewall deployments are used most often in current designs.
第14题:
A. added security
B. dedicated bandwidth
C. provides segmentation
D. allows switches to route traffic between subinterfaces
E. contains collisions
第15题:
Which unique characteristics of the Data Center Aggregation layer must be considered by an Enterprise Campus designer?()
第16题:
Which two of these are characteristics of an IPS device?()
第17题:
Which two of these are characteristics of an IDS sensor?()
第18题:
You are asked to configure real-time performance monitoring (RPM) between two Junos devices to track traffic in your network. Which two application traffic types can you track?()
第19题:
Which two benefits are provided by creating VLANs? ()
第20题:
When load balancing traffic between two web servers, which of the following technologies provides the LOWEST cost solution?()
第21题:
Which term describes a group of packets sharing common forwarding characteristics?()
第22题:
added security
dedicated bandwidth
provides segmentation
allows switches to route traffic between subinterfaces
contains collisions
第23题:
passively listens to network traffic
is an active device in the traffic path
has a permissive interface that is used to monitor networks
traffic arrives on one IDS interface and exits on another
has a promiscuous interface that is used to monitor the network
第24题:
passively listens to network traffic
is an active device in the traffic path
has a permissive interface that is used to monitor networks
traffic arrives on one IPS interface and exits on another