单选题After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server 

题目
单选题
After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）
A

Replace the second drive with a hot swappable one.

B

Swap the drive boot order in the BIOS

C

Make the second disk active under the disk management tool.

D

Rebuild the array using the hardware RAID tool at boot.

相似考题

1.Your Windows 2000 Server computer named EzonexamSrv contains a single 18-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 2 GB in size and contains the operating system files. Partition D is 16 GB in size and contains user data that is updated frequently.Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 10:00 P.M.You have a current Emergency Repair Disk (ERD) for EzonexamSrv, and the Recovery Console is installed on the computer.One day at4:00 P.M., the server fails. You attempt to restart EzonexamSrv, but you receive the following error message:"Boot disk or operating system not found".You use Recovery Console to discover that the files on partition C are corrupted.You need to recover EzonexamSrv from the failure as quickly as possible. You also must recover as much user data as possible.What should you do?A．Use the ERD to start the computer. Replace the corrupted files on partition C by copying them from a Windows 2000 Server CD-ROM.B．Boot the Recovery Console. Copy any files that have changed since 10:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.C．Start the computer by using a Windows 2000 Server CD-ROM. Select the Repair option in Setup.D．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.

2.After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）A、Replace the second drive with a hot swappable one.B、Swap the drive boot order in the BIOSC、Make the second disk active under the disk management tool.D、Rebuild the array using the hardware RAID tool at boot.

3. An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the administrator do FIRST to troubleshoot the problem?（）A、Check the backplane cabling.B、Check the server BIOS.C、Update the RAID controller firmware.D、Install the latest hard drive firmware

4.You are the network administrator for Ezonexam.The network includes a Windows 2000 Server computer that contains a single 36-GB hard disk. The drive is configured as a basic disk and has two partitions. Partition C is 4 GB in size and contains the operating system files. Partition D is 32 GB in size and contains user data that is updated frequently.Both partitions are formatted as NTFS. Both partitions are backed up to a tape every evening at 11:00 P.M.You have a current Emergency Repair Disk (ERD) for the computer, and Recovery Console is installed on the computer.One day at2:00 P.M., the server fails. You attempt to restart the computer, but you receive the following error message: "Boot disk or operating system not found." You use Recovery Console to discover that the files on partition C are corrupted.You want to recover the server from the failure as quickly as possible. You also want to recover as much user data as possible.What should you do?A．Start the computer by using a Windows 2000 Server compact disc. Select the Repair option in Setup.B．Install a second hard disk in the computer. Install Windows 2000 Server on the new hard disk. Re-create the shared folders on the first hard disk.C．Use a Windows 2000 Server boot floppy disk to start the computer. Replace the corrupted files on partition C by copying them from the Emergency Repair Disk.D．Boot to the Recovery Console. Copy any files that have changed since 11:00 P.M. the previous evening to a second server. Use the most recent tape backup to restore the remaining user data to the second server.

更多“单选题After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server ”相关问题

  • 第1题：

    After performing the initial steps in installing the server OS from a DVD-ROM， the server reboots and goes back into the setup wizard. Which of the following is the MOST likely cause for this problem？（）

    • A、The DVD-ROM drive has failed.
    • B、An installation file copied from the DVD to the hard drive is corrupt.
    • C、Faulty OS installation DVD
    • D、Incorrect boot sequence in the BIOS

    正确答案:D

  • 第2题：

    A Windows 2003 server has the operating system installed on a software RAID mirror. After a failure of one disk in the array the server will no longer boot up. The other drive is still functioning. Which of the following should be done to correct the issue？ （）

    • A、 Edit the boot.ini file.
    • B、 Change to a hardware RAID solution.
    • C、 Recreate the array.
    • D、 Edit the active drive in the array.

    正确答案:A

  • 第3题：

    A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）

    • A、 backup the BIOS configuration to use later
    • B、 install the BIOS update from a command prompt
    • C、 create a bootable floppy and copy the BIOS update tools to the floppy
    • D、 read the manufacturer’s guidelines and recommendations on installing the update

    正确答案:D

  • 第4题：

    After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）

    • A、Install a larger fan near the hard drive to cool the system.
    • B、Clean the drive with compressed air and continue to use it.
    • C、Remove and replace the drive.
    • D、Apply more thermal compound and reseat the drive.

    正确答案:C

  • 第5题：

    Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）

    • A、The new drive’s jumper is set for master.
    • B、The new drive is connected to the secondary bus as a slave drive.
    • C、Both drives’ jumpers are set for cable select.
    • D、The old drive’s jumper is set for master and the new drive is set for slave.

    正确答案:A

  • 第6题：

    An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system.  Which of the following is the MOST probable cause？（）

    • A、The BIOS is set with the wrong boot order.
    • B、The jumpers have not been set on the hard drive.
    • C、The hard drive is not compatible with the system board.
    • D、The boot.ini file needs to be modified.

    正确答案:A

  • 第7题：

    单选题
    A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?（）
    A

    Optical drive

    B

    Power supply

    C

    CMOS battery

    D

    CD-ROM disk


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    A technician has just finished installing a new server into a server rack. Which of the following should the technician do NEXT to complete the installation documentation？（）
    A

    Update drivers， update operating system （e.g. Windows Update）， create server baseline， createa new network diagram， update change management procedures

    B

    Create server baseline， label server， store vendor-specific documentation， update networkdiagrams， update asset tracking information

    C

    Create server baseline， assign server roles， install tape drive， delete network diagram， labelserver， update operating system （e.g. Windows Update）

    D

    Install applications on server， install external drives， toss vendor-specific documentation，update network diagrams


    正确答案： B
    解析： 暂无解析

  • 第9题：

    单选题
    After installing a new SATA hard drive the technician notices the drive is hot to the touch and is giving off a slight odor. Which of the following should the technician do? （）
    A

    Install a larger fan near the hard drive to cool the system.

    B

    Clean the drive with compressed air and continue to use it.

    C

    Remove and replace the drive.

    D

    Apply more thermal compound and reseat the drive.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    An administrator has just upgraded a server from non-hot plug storage to all hot plug storage. The administrator powers up the server, during POST the RAID controller is recognized but none of the drive lights flash. Which of the following should the administrator do FIRST to troubleshoot the problem?（）
    A

    Check the backplane cabling.

    B

    Check the server BIOS.

    C

    Update the RAID controller firmware.

    D

    Install the latest hard drive firmware


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    A Windows 2003 server has the operating system installed on a software RAID mirror. After a failure of one disk in the array the server will no longer boot up. The other drive is still functioning. Which of the following should be done to correct the issue？ （）
    A

     Edit the boot.ini file.

    B

     Change to a hardware RAID solution.

    C

     Recreate the array.

    D

     Edit the active drive in the array.


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    A technician purchases a new 120 GB IDE hard disk to use in an old server as a swap drive. After adding the drive to the server， the technician discovers that the operating system does not detect the drive.   After rebooting the server， the technician notices the drive is missing from POST and comes to the conclusion that the BIOS needs to be updated. The technician downloads the latest version of the BIOS update from the manufacturer website.   Which action should the technician take next？（）
    A

     backup the BIOS configuration to use later

    B

     install the BIOS update from a command prompt

    C

     create a bootable floppy and copy the BIOS update tools to the floppy

    D

     read the manufacturer’s guidelines and recommendations on installing the update


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A user reports that after configuring the BIOS to boot to the hard drive first, the system still tries to boot from the optical drive. Which of the following is the MOST likely cause?（）

    • A、Optical drive
    • B、Power supply
    • C、CMOS battery
    • D、CD-ROM disk

    正确答案:C

  • 第14题：

    A technician has just finished installing a new server into a server rack. Which of the following should the technician do NEXT to complete the installation documentation？（）

    • A、Update drivers， update operating system （e.g. Windows Update）， create server baseline， createa new network diagram， update change management procedures
    • B、Create server baseline， label server， store vendor-specific documentation， update networkdiagrams， update asset tracking information
    • C、Create server baseline， assign server roles， install tape drive， delete network diagram， labelserver， update operating system （e.g. Windows Update）
    • D、Install applications on server， install external drives， toss vendor-specific documentation，update network diagrams

    正确答案:B

  • 第15题：

    A technician manages a server that contains sensitive data. The server currently has two hard drives， one hosting the operating system and other generic files and the second hosting sensitive data. The technician needs to implement a technology that would guard against data loss for only the sensitive data， while adding only one additional hard drive. Which of the following should the technician implement to avoid reformatting any drives？（）

    • A、RAID 0
    • B、RAID 1
    • C、RAID 3
    • D、RAID 5

    正确答案:B

  • 第16题：

    Two new servers are purchased and need to be installed to allow sharing of a single external hard drive enclosure.  One server is configured as a local file server， and the other as a database server for a different network.  The onsite technician notices that when both servers are running at the same time， they each receive SCSI errors. When they are running individually， no errors are reported.   Which of the following is the BEST source of information to use for troubleshooting this problem？（）

    • A、 the server vendor’s FAQ website
    • B、 the SCSI controller vendor’s user manual
    • C、 the drive enclosure vendor’s user manual
    • D、 the network operating system vendor’s website

    正确答案:C

  • 第17题：

    The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）

    • A、Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.
    • B、Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.
    • C、Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.
    • D、Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.

    正确答案:D

  • 第18题：

    单选题
    After performing the initial steps in installing the server OS from a DVD-ROM， the server reboots and goes back into the setup wizard. Which of the following is the MOST likely cause for this problem？（）
    A

    The DVD-ROM drive has failed.

    B

    An installation file copied from the DVD to the hard drive is corrupt.

    C

    Faulty OS installation DVD

    D

    Incorrect boot sequence in the BIOS


    正确答案： D
    解析： 暂无解析

  • 第19题：

    单选题
    Two new servers are purchased and need to be installed to allow sharing of a single external hard drive enclosure.  One server is configured as a local file server， and the other as a database server for a different network.  The onsite technician notices that when both servers are running at the same time， they each receive SCSI errors. When they are running individually， no errors are reported.   Which of the following is the BEST source of information to use for troubleshooting this problem？（）
    A

     the server vendor’s FAQ website

    B

     the SCSI controller vendor’s user manual

    C

     the drive enclosure vendor’s user manual

    D

     the network operating system vendor’s website


    正确答案： D
    解析： 暂无解析

  • 第20题：

    单选题
    Bob, a technician, is adding a secondary IDE hard drive to an older system. After installation and the first boot, the drive is not showing in Disk Management. Which of the following is the MOST likely cause of the issue?（）
    A

    The new drive’s jumper is set for master.

    B

    The new drive is connected to the secondary bus as a slave drive.

    C

    Both drives’ jumpers are set for cable select.

    D

    The old drive’s jumper is set for master and the new drive is set for slave.


    正确答案： A
    解析： 暂无解析

  • 第21题：

    单选题
    An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system.  Which of the following is the MOST probable cause？（）
    A

    The BIOS is set with the wrong boot order.

    B

    The jumpers have not been set on the hard drive.

    C

    The hard drive is not compatible with the system board.

    D

    The boot.ini file needs to be modified.


    正确答案： A
    解析： 暂无解析

  • 第22题：

    单选题
    After installing a new hard drive into a server for the purpose of mirroring the data from the first drive to the second one， the server displays an “operating system not found” error. Which of the following should the technician do to boot the server from the original drive？（）
    A

    Replace the second drive with a hot swappable one.

    B

    Swap the drive boot order in the BIOS

    C

    Make the second disk active under the disk management tool.

    D

    Rebuild the array using the hardware RAID tool at boot.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    A technician manages a server that contains sensitive data. The server currently has two hard drives， one hosting the operating system and other generic files and the second hosting sensitive data. The technician needs to implement a technology that would guard against data loss for only the sensitive data， while adding only one additional hard drive. Which of the following should the technician implement to avoid reformatting any drives？（）
    A

    RAID 0

    B

    RAID 1

    C

    RAID 3

    D

    RAID 5


    正确答案： B
    解析： 暂无解析

  • 第24题：

    单选题
    The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）
    A

    Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.

    B

    Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.

    C

    Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.

    D

    Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.


    正确答案： D
    解析： 暂无解析

相关内容