单选题A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and fo

题目
单选题
A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS.  Which of the following would be the FIRST step in regaining access to the drive？ （）
A

 Reformat the NTFS partition.

B

 Recreate the partition that was deleted.

C

 Rewrite the MBR.

D

 Run a check disk on the drive.

相似考题

1.A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started.Which of the following Windows utilities would help configure the new hard disk?（）A. Disk ManagementB. Services and ApplicationsC. Removable StorageD. Device Manager

2.You have two servers named Server1 and Server2 that run Windows Server 2003 Service Pack (SP2).You connect a USB drive to Server1 and copy several files to the USB drive.You connect the USB drive to Server2. You receive a message that the drive installed successful and isready-to-use.You open Windows Explorer and the USB drive does not appear.You need to ensure that you can access the files stored on the USB drive.What should you do? （）A. From the command prompt, run Convert.exe.B. From the Disk Management snap-in, change the drive letter.C. From the Services snap-in, restart the Removable Storage service.D. From the Device Manager snap-in, scan for a hardware change.

3. A server has a single failed hard drive in an array that is accessed through a hot plug backplane to ease replacement of failed drives. After replacing the drive several times， each of the replacement drives failed to power up and rebuild as the failed drive.  Which of the following is the MOST likely cause of the failures？（）A、 The backplane has failed and needs to be replaced.B、 The array must be disbanded and recreated from a backup source to recognize the replacement drive.C、 There is a conflict with the optical drive on the server.D、 The server power supply is failing and not providing enough power for all the drives.

4.A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables are connected, the drive has power, and the drive shows up in Device Manager; however, the My Computer window does not show the drive that was previously working and formatted with NTFS.Which of the following would be the FIRST step in regaining access to the drive?（）A. Reformat the NTFS partition.B. Recreate the partition that was deleted.C. Rewrite the MBR.D. Run a check disk on the drive

更多“单选题A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and fo”相关问题

  • 第1题：

    A Windows 2003 server has the operating system installed on a software RAID mirror. After a failure of one disk in the array the server will no longer boot up. The other drive is still functioning. Which of the following should be done to correct the issue？ （）

    • A、 Edit the boot.ini file.
    • B、 Change to a hardware RAID solution.
    • C、 Recreate the array.
    • D、 Edit the active drive in the array.

    正确答案:A

  • 第2题：

    A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer.  Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）

    • A、Add another hard drive and use that available space.
    • B、Run FDISK.
    • C、Use the Disk Management tool.
    • D、Back up all important data to an external drive then reformat the hard drive.

    正确答案:C

  • 第3题：

    A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables are connected, the drive has power, and the drive shows up in Device Manager; however, the My Computer window does not show the drive that was previously working and formatted with NTFS. Which of the following would be the FIRST step in regaining access to the drive?（）

    • A、Reformat the NTFS partition.
    • B、Recreate the partition that was deleted.
    • C、Rewrite the MBR.
    • D、Run a check disk on the drive

    正确答案:D

  • 第4题：

    An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed.  Which of the following items should the administrator have to connect the device to the backup server？（）

    • A、 SCSI cable
    • B、 SCSI interface adapter on the tape library
    • C、 SCSI termination card on the server
    • D、 iSCSI cable

    正确答案:A

  • 第5题：

    A user has recently added a second IDE CD-RW drive to a machine in addition to the primary DVD-ROM drive. The drive opens and closes; however, they do not see it show up in Windows. Which of the following is the MOST likely cause?（）

    • A、The drive jumper settings are incorrect.
    • B、The drive is not receiving power from PSU.
    • C、Windows only supports one optical drive.
    • D、The user connected the drive with a SATA cable.

    正确答案:A

  • 第6题：

    单选题
    A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）
    A

    Disk Management

    B

    Services and Applications

    C

    Removable Storage

    D

    Device Manager


    正确答案： B
    解析： 暂无解析

  • 第7题：

    单选题
    A server has a single failed hard drive in an array that is accessed through a hot plug backplane to ease replacement of failed drives. After replacing the drive several times， each of the replacement drives failed to power up and rebuild as the failed drive.  Which of the following is the MOST likely cause of the failures？（）
    A

     The backplane has failed and needs to be replaced.

    B

     The array must be disbanded and recreated from a backup source to recognize the replacement drive.

    C

     There is a conflict with the optical drive on the server.

    D

     The server power supply is failing and not providing enough power for all the drives.


    正确答案： C
    解析： 暂无解析

  • 第8题：

    单选题
    A user has recently added a second IDE CD-RW drive to a machine in addition to the primary DVD-ROM drive. The drive opens and closes; however, they do not see it show up in Windows. Which of the following is the MOST likely cause?（）
    A

    The drive jumper settings are incorrect.

    B

    The drive is not receiving power from PSU.

    C

    Windows only supports one optical drive.

    D

    The user connected the drive with a SATA cable.


    正确答案： C
    解析： 暂无解析

  • 第9题：

    单选题
    A Windows 2003 server has the operating system installed on a software RAID mirror. After a failure of one disk in the array the server will no longer boot up. The other drive is still functioning. Which of the following should be done to correct the issue？ （）
    A

     Edit the boot.ini file.

    B

     Change to a hardware RAID solution.

    C

     Recreate the array.

    D

     Edit the active drive in the array.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    You have two servers named Server1 and Server2 that run Windows Server 2003 Service Pack (SP2). You connect a USB drive to Server1 and copy several files to the USB drive. You connect the USB drive to Server2. You receive a message that the drive installed successful and is ready-to-use. You open Windows Explorer and the USB drive does not appear. You need to ensure that you can access the files stored on the USB drive. What should you do? （）
    A

    From the command prompt, run Convert.exe.

    B

    From the Disk Management snap-in, change the drive letter.

    C

    From the Services snap-in, restart the Removable Storage service.

    D

    From the Device Manager snap-in, scan for a hardware change.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    单选题
    A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS.  Which of the following would be the FIRST step in regaining access to the drive？ （）
    A

     Reformat the NTFS partition.

    B

     Recreate the partition that was deleted.

    C

     Rewrite the MBR.

    D

     Run a check disk on the drive.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）
    A

    Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.

    B

    Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.

    C

    Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.

    D

    Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A server has had a drive fail in its storage RAID set.  The administrator swaps the drive with a replacement and the RAID set does not automatically start to rebuild the replaced drive.  Which ofthe following utilities would MOST likely be used to initialize the rebuilding of the replace mentdrive？（）

    • A、Net use
    • B、Array management
    • C、Fdisk
    • D、Disk Management Plug-in

    正确答案:B

  • 第14题：

    A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables areconnected， the drive has power， and the drive shows up in Device Manager； however， the My Computerwindow does not show the drive that was previously working and formatted with NTFS.  Which of the following would be the FIRST step in regaining access to the drive？ （）

    • A、 Reformat the NTFS partition.
    • B、 Recreate the partition that was deleted.
    • C、 Rewrite the MBR.
    • D、 Run a check disk on the drive.

    正确答案:D

  • 第15题：

    A technician has installed a secondary hard drive for a computer. However, the hard drive is not appearing under My Computer. The disk is receiving power, and appeared on the POST when Windows started. Which of the following Windows utilities would help configure the new hard disk?（）

    • A、Disk Management
    • B、Services and Applications
    • C、Removable Storage
    • D、Device Manager

    正确答案:A

  • 第16题：

    An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance.  The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）

    • A、Move the page file to the new drive.
    • B、Copy the system32 directory to the new drive.
    • C、Convert the C drive to a basic disk.
    • D、Setup a software RAID to mirror the C drive.

    正确答案:A

  • 第17题：

    The technician is working on a system and has determined that the hard drive must be reimaged. However, the customer wants to retain all the data. Which of the following would take the LEAST amount of time to implement?（）

    • A、Create a new partition on the hard drive, copy all data to the new partition, reimage the drive, and the old data will be on the new partition and accessible.
    • B、Install a new hard drive, slave the old drive, image the new drive, and show the customer how to access their data on the old drive.
    • C、Upload the data to an external FTP server, reimage the drive, and then restore the data to the newly imaged drive.
    • D、Copy data to a USB connected hard drive, reimage the drive, and then restore the data to the newly imaged drive.

    正确答案:D

  • 第18题：

    单选题
    An administrator has added a new hard drive to a server that is running out of space on its C Drive and is experiencing slow performance.  The administrator needs to free up space on the C Drive.Which of the following is the BEST action for the administrator to take to free up space on the drive？（）
    A

    Move the page file to the new drive.

    B

    Copy the system32 directory to the new drive.

    C

    Convert the C drive to a basic disk.

    D

    Setup a software RAID to mirror the C drive.


    正确答案： B
    解析： 暂无解析

  • 第19题：

    单选题
    A client purchased a new internal hard drive to act as a second drive on a legacy machine. When the client attempts to install the drive, the cable connector on the new drive is not compatible with the available IDE cables. It is determined that the client has purchased a SATA hard drive. Which of the following would the technician recommend as the BEST solution to this situation?（）
    A

    Have the client purchase a SATA compatible system board.

    B

    Have the client purchase a SATA to IDE conversion kit.

    C

    Have the client return the drive and purchase an IDE compatible drive.

    D

    Have the client purchase a SCSI to SATA conversion kit.


    正确答案： C
    解析： 暂无解析

  • 第20题：

    单选题
    An administrator is up grading the back up server from a single tape drive to a SCSI tape library. The library has been unpackaged， mounted， and the library drivers installed.  Which of the following items should the administrator have to connect the device to the backup server？（）
    A

     SCSI cable

    B

     SCSI interface adapter on the tape library

    C

     SCSI termination card on the server

    D

     iSCSI cable


    正确答案： B
    解析： 暂无解析

  • 第21题：

    单选题
    A server has had a drive fail in its storage RAID set.  The administrator swaps the drive with a replacement and the RAID set does not automatically start to rebuild the replaced drive.  Which ofthe following utilities would MOST likely be used to initialize the rebuilding of the replace mentdrive？（）
    A

    Net use

    B

    Array management

    C

    Fdisk

    D

    Disk Management Plug-in


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    A technician is working on a new computer running Windows XP and the hard drive is formatted at 20GB but is an 80GB hard drive. There is not another partition and no extra space can be foundunder Windows explorer.  Which of the following would be the BEST way to partition the remainder of the hard drive without data loss？ （）
    A

    Add another hard drive and use that available space.

    B

    Run FDISK.

    C

    Use the Disk Management tool.

    D

    Back up all important data to an external drive then reformat the hard drive.


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    A Windows 2003 Server is no longer able to access its internal SCSI drive. The cables are connected, the drive has power, and the drive shows up in Device Manager; however, the My Computer window does not show the drive that was previously working and formatted with NTFS. Which of the following would be the FIRST step in regaining access to the drive?（）
    A

    Reformat the NTFS partition.

    B

    Recreate the partition that was deleted.

    C

    Rewrite the MBR.

    D

    Run a check disk on the drive


    正确答案： C
    解析： 暂无解析

  • 第24题：

    单选题
    You have two servers named Server1 and Server2 that run Windows Server 2003 Service Pack (SP2). You connect a USB drive to Server1 and copy several files to the USB drive. You connect the USB drive to Server2. You receive a message that the drive installed successful and is ready-to-use. You open Windows Explorer and the USB drive does not appear. You need to ensure that you can access the files stored on the USB drive. What should you do? （）
    A

    From the command prompt, run Convert.exe.

    B

    From the Disk Management snap-in, change the drive letter.

    C

    From the Services snap-in, restart the Removable Storage service.

    D

    From the Device Manager snap-in, scan for a hardware change.


    正确答案： A
    解析： 暂无解析

相关内容