多选题The network administrator of the Oregon router adds the following command to the router configuration: ip route 192.168.12.0 255.255.255.0 172.16.12.1. What are the results of adding this command (Choose two.)（）。AThe command establishes a static route.

题目
多选题
The network administrator of the Oregon router adds the following command to the router configuration: ip route 192.168.12.0 255.255.255.0 172.16.12.1. What are the results of adding this command (Choose two.)（）。
A

The command establishes a static route.

B

The command invokes a dynamic routing protocol for 192.168.12.0.

C

Traffic for network 192.168.12.0 is forwarded to 172.16.12.1.

D

Traffic for all networks is forwarded to 172.16.12.1.

E

This route is automatically propagated throughout the entire network.

F

Trafficfor network 172.16.12.0 is forwarded to the 192.168.12.0 network.

相似考题

1.The Ezonexam network administrator wants to use a router named VE1 to segment the local network. What are some of the advantages of using VE1 to segment the network? (Choose two)A. Routers generally cost less than switchesB. Filtering can occur based on Layer 3 informationC. Broadcasts are not forwarded across the routerD. Broadcasts are eliminatedE. Adding a router to the network decreases latencyF. Routers can generally support more LAN ports than switches

2.A network administrator needs to configure a router for a Frame Relay connection to a non－Cisco router. Which of the following commands will prepare the WAN interface for this connection?()A. Router(config-if)# encapsulation frame-relay q933aB. Router(config-if)# encapsulation frame-relay ansiC. Router(config-if)# encapsulation frame-relay ietfD. Router(config-if)# encapsulation frame-relay islE. None of the above

3.RouterR1needstobeconfiguredtoadvertiseaspecificnetwork.Whichofthefollowingcommandswouldyouuseifyouwantedtoadvertisethesubnet154.2.1.0255.255.255.0tothe EBGPneighborsonyoursubnet?()A.Router（config-router）#network154.2.1.0B.outer（config-router）#network164.2.1.0C.Router（config-router）#network-advertise154.2.1.0D.Router（config-router）#network154.2.1.0mask255.255.255.0E.Noneoftheotheralternativesapply

4.Which of the following should an administrator do after running a command from the console onthe perimeter router?()A. Update the configuration logsB. Update the network wiring schematicsC. Update the network configuration proceduresD. Compare the configuration with the baseline

更多“The network administrator of the Oregon router adds the foll”相关问题

  • 第1题：

    The network administrator would like to generate synthetic traffic using the Service Assurance Agent contained in Cisco IOS. Which CiscoWorks network management application will be used to report the latency and availability for configured traffic operations on an end-to-end and hop-byhop (router-to-router) basis?（）

    A. nGenius Real-Time Monitor

    B. CiscoView

    C. Device Fault Manager

    D. Internetwork Performance Monitor


    参考答案：D

  • 第2题：

    A network administrator needs to configure a serial link between the main office and a remote location. The router at the remote office is a non-Cisco router.How should the network administrator configure the serial interface of the main office router to make the connection?（）

    A.

    B.

    C.

    D.


    参考答案：B

  • 第3题：

    A network administrator enters the following command on a router: logging trap 3. What are three message types that will be sent to the Syslog server? （）

    • A、informational
    • B、emergency
    • C、warning
    • D、critical 
    • E、debug
    • F、error

    正确答案:B,D,F

  • 第4题：

    A network administrator receives an error message while tring to configure the Ethernet interface of a router with IP address 10.24.24.24/29. which statement explains the reason for this issue？（）

    • A、The address is abroadcast address.
    • B、The Ehernet interface is faulty.
    • C、VLSM-capable routing protocols must be enable first on the router.
    • D、This address is a network address.

    正确答案:D

  • 第5题：

    A network administrator is troubleshooing an EIGRP problem on a router and needs to confirm the IP addresses of the devices with which the router has established adjacency. The retransmit interval and the queue counts for the adjacent routers also need to be checked. What command will display the required information?（）

    • A、Router# show ip eigrp adjacency
    • B、Router# show ip eigrp topology
    • C、Router# show ip eigrp interfaces
    • D、Router# show ip eigrp neighbors

    正确答案:D

  • 第6题：

    What are two reasons that a network administrator would use access lists? (Choose two.) （）。

    • A、to control vty access into a router  
    • B、to control broadcast traffic through a router  
    • C、to filter traffic as it passes through a router  
    • D、to filter traffic that originates from the router  
    • E、to replace passwords as a line of defense against security incursions 

    正确答案:A,C

  • 第7题：

    A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem? （）Router(config)#router ospf 1Router(config-router)#network 10.0.0.0 255.0.0.0 area 0

    • A、The process id is configured improperly
    • B、The OSPF area is configured improperly
    • C、The network wildcard mask is configured improperly
    • D、The network number is configured improperly
    • E、The AS is configured improperly
    • F、The network subnet mask is configuerd improperly

    正确答案:C

  • 第8题：

    Which of the following would need to be implemented on a wireless router to allow network accessbased on a passphrase that the administrator would supply?（）

    • A、WPA-PSK encryption
    • B、SSID broadcast
    • C、Port forwarding
    • D、MAC filtering

    正确答案:A

  • 第9题：

    多选题
    The network administrator of the Oregon router adds the following command to the router configuration: ip route 192.168.12.0 255.255.255.0 172.16.12.1. What are the results of adding this command (Choose two.)（）。
    A

    The command establishes a static route.

    B

    The command invokes a dynamic routing protocol for 192.168.12.0.

    C

    Traffic for network 192.168.12.0 is forwarded to 172.16.12.1.

    D

    Traffic for all networks is forwarded to 172.16.12.1.

    E

    This route is automatically propagated throughout the entire network.

    F

    Trafficfor network 172.16.12.0 is forwarded to the 192.168.12.0 network.


    正确答案： D,E
    解析： 暂无解析

  • 第10题：

    单选题
    Which of the following should an administrator do after running a command from the console onthe perimeter router?（）
    A

    Update the configuration logs

    B

    Update the network wiring schematics

    C

    Update the network configuration procedures

    D

    Compare the configuration with the baseline


    正确答案： D
    解析： 暂无解析

  • 第11题：

    多选题
    A network administrator enters the following command on a router: logging trap 3. What are three message types that will be sent to the Syslog server? （）
    A

    informational

    B

    emergency

    C

    warning

    D

    critical 

    E

    debug

    F

    error


    正确答案： A,B
    解析： 暂无解析

  • 第12题：

    单选题
    A network administrator receives an error message while tring to configure the Ethernet interface of a router with IP address 10.24.24.24/29.which statement explains the reason for this issue?（）
    A

    The address is a broadcast address

    B

    The Ehernet interface is faulty

    C

    VLSM-capable routing protocols must be enable first on the router.

    D

    This address is a network address.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    The network administrator of the Oregon router adds the follwing command to the router configuration: ip route 192.168.12.0 255.255.255.0 172.16.12.1. What are the results of adding this command?()

    A. The command establishes a static route

    B. The command invokes a dynamic routing protocol for 192.168.12.0

    C. Traffic for network 192.168.12.0 is forwarded to 172.16.12.1

    D. Traffic for all networks is forwarded to 172.16.12.1

    E. This route is automatically propagated throughout the entire network

    F. Traffic for network 172.16.12.0 is forwarded to the 192.168.12.0 network


    参考答案：A, C

  • 第14题：

    The network administrator of the Oregon router adds the follwing command to the router configuration: ip route 192.168.12.0 255.255.255.0 172.16.12.1. What are the results of adding this command?（）

    • A、The command establishes a static route
    • B、The command invokes a dynamic routing protocol for 192.168.12.0
    • C、Traffic for network 192.168.12.0 is forwarded to 172.16.12.1
    • D、Traffic for all networks is forwarded to 172.16.12.1
    • E、This route is automatically propagated throughout the entire network
    • F、Traffic for network 172.16.12.0 is forwarded to the 192.168.12.0 network

    正确答案:A,C

  • 第15题：

    A network administrator changes the configuration register to 0x2142 and reboots the router. What are two results of making this change?（）

    • A、The IOS image will be ignored.
    • B、The router will prompt to enter initial configuration mode.
    • C、The router will boot to ROM.
    • D、Any configuration entries in NVRAM will be ignored.
    • E、The configuration in flash memory will be booted.

    正确答案:B,D

  • 第16题：

    A network administrator has configured access list 172 to prevent Telnet and ICMP traffic from reaching a server with the address if 192.168.13.26. Which command can the administrator issue to verify that the access list is working properly?（）

    • A、Router# ping 192.168.13.26
    • B、Router# debug access-list 172
    • C、Router# show open ports 192.168.13.26
    • D、Router# show access-list
    • E、Router# show ip interface

    正确答案:A,D,E

  • 第17题：

    A network administrator receives an error message while tring to configure the Ethernet interface of a router with IP address 10.24.24.24/29.which statement explains the reason for this issue?（）

    • A、The address is a broadcast address
    • B、The Ehernet interface is faulty
    • C、VLSM-capable routing protocols must be enable first on the router.
    • D、This address is a network address.

    正确答案:D

  • 第18题：

    A network administrator enters the command clear ip route * and as a result he sees the message，"Please update the network documentation to record why the ip routing table was cleared." Which router feature was used in this case？（）

    • A、NetFlow
    • B、SNMP
    • C、Debug
    • D、SysLog
    • E、EEM
    • F、CEF

    正确答案:E

  • 第19题：

    A network administrator needs to add an additional connection to a room. The administrator adds a new Ethernet switch and must connect it to an existing switch. Which cable type should be used to connect the two switches?（）

    • A、CAT3 cable
    • B、Serial cable
    • C、Crossover cable
    • D、Rollover cable

    正确答案:C

  • 第20题：

    多选题
    You are the network administrator at TestKing. You need to perform password recovery on Router TK1. What must you modify in the password recovery process?（）
    A

    Configuration register

    B

    NVRAM

    C

    Boot flash

    D

    CMOS

    E

    Flash


    正确答案： E,D
    解析： 暂无解析

  • 第21题：

    单选题
    The network administrator would like to generate synthetic traffic using the Service AssuranceAgent contained in Cisco IOS. Which CiscoWorks network management application will be used toreport the latency and availability for configured traffic operations on an end-to-end and hop-by-hop （router-to router） basis？（）
    A

     nGenius Real-Time Monitor

    B

     CiscoView

    C

     Device Fault Manager

    D

     Internetwork Performance Monitor


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    A network administrator is trying to add a new router into an established OSPF network.The networks attached to the new router do not appear in the routing tables of the other OSPF routers.Given the information in the partial configuration shown below,what configuration error is causing this problem?（） Router(config)#router ospf 1 Router(config-router)#network 10.0.0.0 255.0.0.0 area 0
    A

    The process id is configured improperly

    B

    The OSPF area is configured improperly

    C

    The network wildcard mask is configured improperly

    D

    The network number is configured improperly

    E

    The AS is configured improperly

    F

    The network subnet mask is configuerd improperly


    正确答案： F
    解析： 暂无解析

  • 第23题：

    单选题
    The network administrator would like to generate synthetic traffic using the Service Assurance Agent contained in Cisco IOS. Which CiscoWorks network management application will be used to report the latency and availability for configured traffic operations on an end-to-end and hop-byhop (router-to-router) basis?（）
    A

    nGenius Real-Time Monitor

    B

    CiscoView

    C

    Device Fault Manager

    D

    Internetwork Performance Monitor


    正确答案： A
    解析： 暂无解析

  • 第24题：

    单选题
    Refer to the exhibit. A network administrator configures a new router and enters the copy startup-config running-config on the router. The network administrator powers down the router and sets it up at a remote location. When the router starts, it enter the system configuration dialog as shown. What is the caust of the problem?（）
    A

    The network administrator faled to save the configuration.

    B

    The configuration register is set to 0x2100.

    C

    The boot system flash command is missing from the configuration.

    D

    The configuraiton register is set to 0x2102.

    E

    The router is configured with the boot system startup command.


    正确答案： A
    解析： 暂无解析

相关内容