多选题You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）AThe switch name must m

题目
多选题
You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）
A

The switch name must match the workgroup name of the local network.

B

The switch must be configured with an IP address and default gateway.

C

The remote workstations must have access to the management VLAN of the switch.

D

CDP must be enabled on the switch so that it can be located by other devices on the network.

相似考题

1.A new switch is being installed in the Ezonexam network and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this? (Choose all that apply).A．You must set each end of the trunk line to IEEE 802.1e encapsulation.B．You must set the same VTP management domain name on both switches.C．You must set all ports on the two switches as access ports.D．You must configure one of the switches as a VTP server.E．You must use a rollover cable to connect the two switches.

2.You want to install Windows 2000 Professional on 20 new PXE compliant computers, which do not have operating systems installed. You create a RIS image and load the image onto the RIS server and then start the new computers. You find that the new computers cannot connect to the RIS server. You verify that existing client computers on the network can connect to network servers.What should you do? (SELECT AND PLACE)

3.You are the administrator for your company's network. The network is configured as shown in the exhibit.You want to install Windows 2000 Professional on 20 new PXE-compliant computers on the marketing segment of your network. The new computers do not have operating systems installed.You create a RIS image. You load the image onto the RIS server. You then start the new computers.You find that the new computers cannot connect to the RIS server. You verify that the new computers cannot connect to the RIS server. You verify that the existing client computers in the network can connect to the network servers, including the RIS server. You want to enable the new computers to connect to the RIS server.What should you do?A．Add a Windows 2000 Server computer running WINS to the network.B．Add a Windows 2000 Server computer running DHCP to the network.C．Add the domain Everyone group to the RIS OS image security settings.D．Place the new computers on the same segment as the RIS server.

4.Examine this statement: SELECT student_id, gpa FROM student_grades WHERE gpa >&&value; You run the statement once, and when prompted you enter a value of 2.0. A report is produced. What happens when you run the statement a second time?（）A. An error is returned.B. You are prompted to enter a new value.C. A report is produced that matches the first report produced.D. You are asked whether you want a new value or if you want to run the report based on the previous value.

更多“You are configuring a new Catalyst switch that you want to m”相关问题

  • 第1题：

    You are configuring captive portal on your SRX Series device for guest user access.When would you use the redirect－traffic all command?()

    A. When you want all unauthenticated traffic to be redirected

    B. When you want all clear text traffic to be redirected.

    C. When you want all authenticated traffic to be redirected.

    D. When you want all encrypted traffic to be redirected.


    参考答案：B

  • 第2题：

    You want your Catalyst switch to implement a switching method that holds a packet in its memory until the data portion of the respected packet reaches the switch.Which method should you employ on your Catalyst switch?（）

    A. Fast Forward

    B. Store and forward

    C. Frag-free

    D. None of the above


    参考答案：C

  • 第3题：

    Why do you want a new job ______you've got such a good one already?

    A. that

    B. where

    C. which

    D. when


    正确答案：D

    17．答案为D。为什么你已经有个好工作，还要找新工作?分析整句结构，从句做状语，只有 D为正确选项。

  • 第4题：

    You are configuring a Cisco multilayer switch for the Company network.  Which command would  you use to configure a port to act as a routed interface？（）

    • A、 ip routing
    • B、 switchport mode trunk
    • C、 no switchport
    • D、 switchport trunk native vlan 1
    • E、 None of the other alternatives apply

    正确答案:C

  • 第5题：

    You want your Catalyst switch to implement a switching method that holds a packet in its memory until the data portion of the respected packet reaches the switch.Which method should you employ on your Catalyst switch?（）

    • A、Fast Forward
    • B、Store and forward
    • C、Frag-free
    • D、None of the above

    正确答案:C

  • 第6题：

    A new switch is being installed and you have been assigned the task of connecting it to an existing switch. In doing this, you want to set up the VLAN Trunking Protocol so that VLAN information can be passed between the switches. Which of the following must you do to accomplish this?（）

    • A、You must set each end of the trunk line to IEEE 802.1e encapsulation.
    • B、You must set the same VTP management domain name on both switches.
    • C、You must set all ports on the two switches as access ports.
    • D、You must configure one of the switches as a VTP server.
    • E、You must use a rollover cable to connect the two switches.

    正确答案:B,D

  • 第7题：

    You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers on the ABC.com network have Windows Server 2008 R2 installed. Some of ABC.com’s workstations have Windows 7 installed， while the rest have Windows 8 installed.  After installing a new Windows Server 2012 R2 computer in the ABC.com domain， you configure it to run the File and Storage Services server role.You are instructed to create a shared folder on the new server， and configure the use of Previous Versions for restoring files located in the shared folder.  Which of the following actions should you take？（）

    • A、You should consider configuring the Shadow Copies settings on the new server.
    • B、You should consider configuring the Snapshot settings on the new server.
    • C、You should consider configuring the Background Copy settings on the new server.
    • D、You should consider configuring the Permission settings on the new server.

    正确答案:A

  • 第8题：

    单选题
    —Lily, what are you going to do after you graduate?—I’m thinking of becoming a computer programmer.—_____—Well, my parents want me to be a doctor, but I don’t want to do that.
    A

    Do you know what I want to become?

    B

    Why do you want to be a doctor?

    C

    You said you would go to a medical school.

    D

    Thanks for your advice.


    正确答案： C
    解析：
    根据上下文意思，空格处应为C项，意为“你曾经说过你会去读医学院”，这才有后面的“我的父母希望我成为一名医生，但我不想做医生”。

  • 第9题：

    单选题
    You are configuring captive portal on your SRX Series device for guest user access.When would you use the redirect-traffic all command?（）
    A

    When you want all unauthenticated traffic to be redirected

    B

    When you want all clear text traffic to be redirected.

    C

    When you want all authenticated traffic to be redirected.

    D

    When you want all encrypted traffic to be redirected.


    正确答案： A
    解析： 暂无解析

  • 第10题：

    单选题
    Assuming the default switch configuration，which approach should you use to configure the extended vlan range（1006 through 4094） on a cisco catalyst 3750 series switch？（）
    A

    Configure the switch to be in VTP client mode.

    B

    Configure the switch to be in VTP domaint mode.

    C

    Configure the switch to be in VTP transparent mode.

    D

    Configure the switch to be in VTPv2.


    正确答案： A
    解析： 暂无解析

  • 第11题：

    单选题
    You want to access employee details contained in flat files as part of the EMPLOYEE table. You planto add a new column to the EMPLOYEE table to achieve this.  Which data type would you use for the new column（）
    A

    CLOB

    B

    BLOB

    C

    BFILE

    D

    LONG RAW


    正确答案： B
    解析： 暂无解析

  • 第12题：

    单选题
    Examine this statement: SELECT student_id, gpa FROM student_grades WHERE gpa > &&value; You run the statement once, and when prompted you enter a value of 2.0. A report is produced. What happens when you run the statement a second time?（）
    A

    An error is returned.

    B

    You are prompted to enter a new value.

    C

    A report is produced that matches the first report produced.

    D

    You are asked whether you want a new value or if you want to run the report based on the previous value.


    正确答案： A
    解析： 暂无解析

  • 第13题：

    The CPU does not have to look(66)all of RAM to find the spot it needs. But RAM only(67)the data temporarily. As soon as you switch the computer(68), all that information disappears from the RAM. When you switch the computer on again, the RAM is(69), and ready(70)a new program and new data.

    A．on

    B．through

    C．for

    D．down upon


    正确答案：B

  • 第14题：

    You are bringing up a new Cisco Catalyst switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method.When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?（）

    A. Switch(config)# switchport trunk encapsulation isl

    B. Switch(config)# switchport trunk encapsulation ietf

    C. Switch(config-if)# switchport trunk encapsulation isl

    D. Switch(config-if)# switchport trunk encapsulation ietf

    E. Switch(config-if)# switchport trunk encapsulation dot1q


    参考答案：E

  • 第15题：

    资料：Changing careers is becoming more popular. Not just because there are more career options available, but also out of necessity. As new industries arise, others die. It's up to you to figure out if your career is still going to be around in the next 5-10 years. Some studies say we could have as many as nine careers in our professional lifetime. Which begs the question: do you know what it takes to successfully change career lanes repeatedly?
    Switching careers is like changing highway lanes: you must signal!
    If you want to move in a new career direction, you need to signal to the professional world you intend to make a change. You need to do it with purpose and specificity. It must look well-thought out and intentional. Otherwise, people will A） not know you are looking to make the change, and B）assume you are doing it because you failed in your current career in some way.
    1. Give the logic and passion behind your career change.
    When signaling to your network you want to switch careers you must explain why both your head and heart are ready to change. Perhaps there are financial or geographic reasons （i.e., you need to relocate or make more money）. But, you must also convey the excitement and sincere desire you have for this new career （i.e., you want to make a difference or work on a particular type of problem that needs to be solved）.
    2. Build a marketing campaign for your business-of-one.
    Most employers prefer to hire people with previous experience. Thus, you're going to need a way to convey to them your transferable skills from your former career path will be equally valuable. The best way to do this is to create a targeted list of employers you want to work for and then strategically network with their employees. The more conversations and connections you can have within your new career path, the easier it will be to convince someone to hire you in spite of your lack of experience.
    To sum it up … Once you commit to a career change, the secret to success is to make sure everyone knows about it. Otherwise, you will struggle to change career lanes efficiently and effectively.

    Which of the following could NOT be a logical reason for career change?

    A.You want to try something new.
    B.You want to make a difference and prove yourself.
    C.You need to make more money to buy a house.
    D.You need to relocate.

    答案：A
    解析：
    本题考查的是细节理解。
    【关键词】not; a logical reason; for career change
    【主题句】第4自然段 Perhaps there are financial or geographic reasons
    （i.e., you need to relocate or make more money）. But, you must also convey the excitement and sincere desire you have for this new career （i.e., you want to make a difference or work on a particular type of problem that needs to be solved）.也许有财务或者地理原因（例如，你需要搬家或者赚更多钱）。但是，你也必须表达你对这个新职业的兴奋和诚挚的渴望（例如，你想做出改变或者解决需要解决的特殊问题。）
    【解析】题干意为“以下哪一项不是转行的合理原因？” 选项A意为“你想尝试新的东西”；选项B意为“你想有所作为，证明自己”；选项C意为“你需要赚更多的钱买房子”；选项D意为“你需要搬迁”；根据主题句可知，选项B、C、D均有涉及，故选项A符合题意。

  • 第16题：

    You are at a client site. It is a medium-sized business and needs a Cisco Catalyst switch that offers high availability and security. What type of Catalyst switches would you recommend？（）

    • A、 Catalyst 2960 Series
    • B、 Catalyst 3750 Series
    • C、 Catalyst 4900 Series
    • D、 Catalyst 6500 Series

    正确答案:A

  • 第17题：

    You are bringing up a new Cisco Catalyst switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?（）

    • A、Switch(config)# switchport trunk encapsulation isl
    • B、Switch(config)# switchport trunk encapsulation ietf
    • C、Switch(config-if)# switchport trunk encapsulation isl
    • D、Switch(config-if)# switchport trunk encapsulation ietf
    • E、Switch(config-if)# switchport trunk encapsulation dot1q

    正确答案:E

  • 第18题：

    You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）

    • A、The switch name must match the workgroup name of the local network.
    • B、The switch must be configured with an IP address and default gateway.
    • C、The remote workstations must have access to the management VLAN of the switch.
    • D、CDP must be enabled on the switch so that it can be located by other devices on the network.

    正确答案:B,C

  • 第19题：

    You work as a network administrator， and your responsibilities include managing server storage. You havebeen asked to purchase a new disk subsystem for your company’s storage-area network （SAN）. You arein the process of testing hardware solutions before making purchases， and you attach a new disksubsystem to the network. You want to provision the new disks and create new logical unit numbers （LUNs）to assign to a server named Server1. You open Storage Manager for SANs， but you can’t see the newhardware. However， you can connect to the new hardware by using the software provided by the vendor.You want to be able to manage the new disk subsystem you purchase by using Storage Manager for SANs. What should you do？（）

    • A、In Disk Management， chooses the Rescan Disks option.
    • B、Choose a disk subsystem from a vendor that has a Virtual Disk Service hardware provider.
    • C、On Server1， configures iSCSI Initiator to specify the new hardware as a favorite target.
    • D、Use Storage Explorer to configure Server1 as an iSNS server.

    正确答案:B

  • 第20题：

    单选题
    You are bringing up a new Cisco Catalyst switch, and wish to connect it via a trunk to another switch from a different vendor, which uses the IEEE standard for the trunking method. When setting the encapsulation type on the trunk, what should you configure on the Cisco switch?（）
    A

    Switch(config)# switchport trunk encapsulation isl

    B

    Switch(config)# switchport trunk encapsulation ietf

    C

    Switch(config-if)# switchport trunk encapsulation isl

    D

    Switch(config-if)# switchport trunk encapsulation ietf

    E

    Switch(config-if)# switchport trunk encapsulation dot1q


    正确答案： E
    解析： 暂无解析

  • 第21题：

    单选题
    In Recovery Manager （RMAN）， you are taking image copies of the data files of your production database and rolling them forward at regular intervals. You attempt to restart your database. After a regular maintenance task， you realize that one of the data files that belongs to the USERS tablespace is damaged and you need to recover the data file by using the image copy. Because a media failure caused the data file to be damaged， you want to place the data file in a different location while resto ing the file.  Which option must you consider for this task？（）
    A

     using only the RMAN SWITCH command to set the new location for the data file

    B

     placing the database in the MOUNT state for the restore and recovery operations

    C

     using an RMAN RUN block with the SET NEWNAME and then the SWITCH command

    D

     configuring two channels： one for the restore operation and the other for the recovery operation


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    You work as a network administrator， and your responsibilities include managing server storage. You havebeen asked to purchase a new disk subsystem for your company’s storage-area network （SAN）. You arein the process of testing hardware solutions before making purchases， and you attach a new disksubsystem to the network. You want to provision the new disks and create new logical unit numbers （LUNs）to assign to a server named Server1. You open Storage Manager for SANs， but you can’t see the newhardware. However， you can connect to the new hardware by using the software provided by the vendor.You want to be able to manage the new disk subsystem you purchase by using Storage Manager for SANs. What should you do？（）
    A

    In Disk Management， chooses the Rescan Disks option.

    B

    Choose a disk subsystem from a vendor that has a Virtual Disk Service hardware provider.

    C

    On Server1， configures iSCSI Initiator to specify the new hardware as a favorite target.

    D

    Use Storage Explorer to configure Server1 as an iSNS server.


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    You are at a client site. It is a medium-sized business and needs a Cisco Catalyst switch that offers high availability and security. What type of Catalyst switches would you recommend？（）
    A

     Catalyst 2960 Series

    B

     Catalyst 3750 Series

    C

     Catalyst 4900 Series

    D

     Catalyst 6500 Series


    正确答案： A
    解析： 暂无解析

相关内容