单选题You want to implement IP address to Computer Name resolving on your Windows 2000 network. How do you configure this in a NETBIOS environment？（）A Install a DHCP ServerB Install a DNS ServerC Install a WINS ServerD Install an LMHOST Converter

题目
单选题
You want to implement IP address to Computer Name resolving on your Windows 2000 network. How do you configure this in a NETBIOS environment？（）
A

Install a DHCP Server

B

Install a DNS Server

C

Install a WINS Server

D

Install an LMHOST Converter

相似考题

1.You have a single Class C IP address and a point-to-point serial link that you want to implement VLSM on. Which subnet mask is the most efficient for this point to point link?A. 255.255.255.0B. 255.255.255.240C. 255.255.255.248D. 255.255.255.252E. 255.255.255.254F. None of the above

2.You work as a technician at TestKing. You are configuring a Cisco router. You want to configure the IP address on an interface.Which command should you use?（）A、router(config-if)#ip address 142.8.2.1 subnet mask 255.255.252.0B、router(config-if)#142.8.2.1 0.0.3.255C、router(config-if)#ip address 142.8.2.1 255.255.252.0D、router(config-if)#142.8.2.1 subnet mask 255.255.252.0E、router(config-if)#ip address 142.8.2.1 0.0.3.255F、router(config-if)#ip address 142.8.2.1 subnet mask /22

3. You are the network administrator for Company.  Your network is a native mode Windows 2000 domain consisting of 50 Windows 2000 Professional client computers and six Windows 2000 Server computers. There are no routers on the network. The client computers have been configured for dynamic IP address application. The network is configured as shown in the Network Diagram.   A user reports that she cannot connect to the server named ES1 from her client computer named Workstation5. When she attempts to browse //ES1 from the Run line she receives the message, “The network path was not found”. No other users are reporting problems connecting to ES1. From the user’s computer, you browse //192.168.72.6 from the Run line and successfully connect to the server. You run the ipconfig /all command. The relevant results are shown in the following table.  You want the user to be able to access resources on ES1 by using the computer name.  What should you do? （）A、On the Internet Protocol (TCP/IP) Properties, sheet, select the Obtain DNS server address      automatically option.B、On the Internet Protocol (TCP/IP) Properties, sheet, select the Obtain an IP address       automatically option. C、Configure the client computer with a default gateway of 192.168.0.1.D、Configure the client computer with a subnet mask of 255.255.0.0.E、Configure the client computer with a WINS server of 192.168.72.5.

4.When you think of the Internet, you probably think of ".com." Just what do those three letters at the end of a World Wide Web address mean? Every computer that hosts data on the Internet has a(71)numerical address. For example, the numerical address for the White House is 198.137.240.100. But since(72)people want to remember long strings of numbers, the(73)was developed. It is a critical part of the Internet's technical infrastructure, correlates a numerical address to a word. To(74)the White House website, you could type its numerical address into the address box of your web browser. But most people prefer to use "www. whitehouse. gov." In this case, the domain name is(75).A．uniqueB．isolatedC．similarD．same

参考答案和解析
正确答案： C
解析： 暂无解析
更多“You want to implement IP address to Computer Name resolving ”相关问题

  • 第1题：

    You have a single Class C IP address and a point-to-point serial link that you want to implement VLSM on. Which subnet mask is the most efficient?（）

    • A、255.255.255.0
    • B、255.255.255.240
    • C、255.255.255.248
    • D、255.255.255.252
    • E、255.255.255.254

    正确答案:D

  • 第2题：

    Users have reported that they cannot access certain Internet sites. An administrator wants to test that the sites are properly resolving to an IP address.  Which of the following tools would allow the administrator to test name resolution？（）

    • A、 net view
    • B、 ipconfig
    • C、 dig
    • D、 ifconfig

    正确答案:C

  • 第3题：

    Your network contains a computer named Computer1. Computer1 is assigned an IP address of 39 / 84 192.168.1.112/26.Your companys corporate policy states that the first usable address in each subnet is allocated to the default gateway.You need to configure the default gateway for Computer1.Which address should you choose？（）

    • A、192.168.1.1
    • B、192.168.1.63
    • C、192.168.1.65
    • D、192.168.1.93

    正确答案:C

  • 第4题：

    You are the administrator of ExamSheet.net's network.  ExamSheet upgrades its network to 100 Mbps. You remove the old network adapter and install a new 10/100 Mbps network adapter into a Windows 2000 Professional computer. You configure the TCP/IP protocol settings so that IP and DNS addresses are obtained automatically. When you restart the computer you cannot access the network. When you attempt toPINGaddress 127.0.0.1 you receive the following error message: "Request timed out."  You want this computer to communicate on the network. What should you do?（）

    • A、Configure IP address settings manually.
    • B、Replace the network adapter.
    • C、Disable TCP/IP filtering for all network adapters.
    • D、Configure DNS server address settings manually.
    • E、Enable IEEE 802.1x authentication.

    正确答案:B

  • 第5题：

    The network at Company Ltd. consists of one Windows NT Server 4.0 domain and 35 Windows 2000Professional computers. The Company network consists of five interconnected TCP/IP subnets. All of thecomputers use TCP/IP as the only network protocol.You are adding 15 Windows 2000 Professional computers to the network. You want to enable theWindows 2000 Professional computers to resolve NetBIOS names to TCP/IP addresses.What should you do？ （）

    • A、Install a DHCP server. Configure each computer to use DHCP. 
    • B、Install a WINS server. Configure each computer to use WINS. 
    • C、Create a Lmhosts.sam file on each computer. Add an entry containing the TCP/IP address and  NetBIOS name for each computer on the network. 
    • D、Create a Hosts.sam file on each computer. Add an entry containing the TCP/IP address and NetBIOS name for each computer on the network. 

    正确答案:B

  • 第6题：

    You configure a W2kPro with static IP. You found an error in DNS server address. You configure DNS address to 10.1.1.5. But the W2kPro is still unable to connect to the network resource by name. You run ipconfig /all and see that DNS server address is：0.0.0.0 What do you do？ （）

    • A、Stop and Restart DNS client service.
    • B、Add 10.1.1.5 to DNS server list on TCP/IP advanced properties tab.  
    • C、Add A （host） record for the computer to the DNS server zone file.  
    • D、Configure DHCP server to have a DNS server address of 10.1.1.5

    正确答案:A

  • 第7题：

    多选题
    You are the administrator of Company.com's Windows 2000 Network. The routed TCP/IP network that you administer consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are members of a single Windows 2000 domain named Company.com. TCP/IP is the only network protocol used at Company's office. You have recently installed 10 new Windows 2000 Professional computers and you want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address and a gateway address on each new computer. You want to complete the configuration to allow the computers to communicate on the network.  What should you do?（）
    A

    Configure a DNS suffix.

    B

    Configure a subnet mask.

    C

    Configure an LMHOSTS file.

    D

    Configure an Interface metric.

    E

    Configure at least one DNS address.


    正确答案： A,E
    解析： 暂无解析

  • 第8题：

    单选题
    ou have a server that runs Windows Server 2003 Service Pack 2 (SP2).You discover that the server has a large number of open connections that originate from the IP address 192.168.1.121. You need to identify the host name of the computer that uses the IP address 192.168.1.121. Which command should you run? （）
    A

    Arp –a 

    B

    Netstat -r 

    C

    Net view //192.168.1.121 

    D

    Ping –a 192.168.1.121


    正确答案： A
    解析： 暂无解析

  • 第9题：

    单选题
    You are the network administrator for Company.  Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers  to the network.   You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet.    You run the ipconfig command to examine the UP address on one of the new computers. The IP address is 169.254.101.72   You want to enable the Windows 2000 Professional computers to communicate outside their own subnet.   What should you do?（）
    A

    Install a DHCP server.

    B

    Install a WINS server. Configure each computer to use WINS.

    C

    Create an Lmhost file on each computer.

    D

    Create a Hosts file on each computer.


    正确答案： C
    解析： 暂无解析

  • 第10题：

    单选题
    You are the network administrator for ExamSheet. Your network consists of one Windows NT Server 4.0 domain and 35 Windows 2000 Professional computers. The network consists of five interconnected TCP/IP subnets. All of the computers use TCP/IP as the only network protocol. You are adding 15 Windows 2000 Professional computers to the network. You configure each of the new computers to use DHCP. The computers can communicate with each other but are unable to communicate outside their own subnet. You run the ipconfig command to examine the IP address on one of the new computers. The IP address is 169.254.101.72 You want to enable the Windows 2000 Professional computers to communicate outside their own subnet. What should you do？（）
    A

    Install a DHCP server.

    B

    Install a WINS server. Configure each computer to use WINS.

    C

    Create an Lmhost file on each computer.

    D

    Create a Hosts file on each computer.


    正确答案： B
    解析： 暂无解析

  • 第11题：

    多选题
    You are the administrator of Company.com’s Windows 2000 Network.  Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. All computers are in the Company.com domain. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use host names to connect to shared resources on the network. You configure a TCP/IP address, a gateway address and a subnet mask on each new computer.   You want to complete the configuration to allow the computers to communicate on the network.  What should you do?（）
    A

    Configure a HOSTS file.

    B

    Configure a LMHOSTS file.

    C

    Configure a WINS server database.

    D

    Configure a DHCP server address.

    E

    Configure at least one DNS address.


    正确答案： A,D
    解析： 暂无解析

  • 第12题：

    单选题
    You work as a technician at TestKing. You are configuring a Cisco router. You want to configure the IP address on an interface.Which command should you use?（）
    A

    router(config-if)#ip address 142.8.2.1 subnet mask 255.255.252.0

    B

    router(config-if)#142.8.2.1 0.0.3.255

    C

    router(config-if)#ip address 142.8.2.1 255.255.252.0

    D

    router(config-if)#142.8.2.1 subnet mask 255.255.252.0

    E

    router(config-if)#ip address 142.8.2.1 0.0.3.255

    F

    router(config-if)#ip address 142.8.2.1 subnet mask /22


    正确答案： A
    解析： 暂无解析

  • 第13题：

    You are configuring a new Catalyst switch that you want to manage remotely from workstations on other network segments within your enterprise.Which of the following are required to allow remote management of the switch over IP?（）

    • A、The switch name must match the workgroup name of the local network.
    • B、The switch must be configured with an IP address and default gateway.
    • C、The remote workstations must have access to the management VLAN of the switch.
    • D、CDP must be enabled on the switch so that it can be located by other devices on the network.

    正确答案:B,C

  • 第14题：

    Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）

    • A、The bindings.
    • B、A DNS address.
    • C、A Gateway address.
    • D、A WINS server address.
    • E、A DHCP server address.

    正确答案:C,D

  • 第15题：

    You are the administrator of a Windows 2000 network. The network consists of a Windows 2000 domain named ExamSheet.net. You install Windows 2000 Professional on a new computer named ES1 and configure the TCP/IP settings to have a static IP address. You plan to join ES1 to the ExamSheet.net domain. You configure two DNS server addresses in the TCP/IP properties. The first DNS server address is for a DNS server hosted by your ISP, the second DNS server address is for a DNS server authoritative for the ExamSheet.net domain. When you attempt to join ES1 to the domain, you are unable to do so. You can successfully PINGthe IP address of each DNS server from ES1. You want ES1 to be able to join the tesking.com domain.  What should you do? （）

    • A、Delete the second DNS server entry.
    • B、Delete the first DNS server entry.
    • C、Add an A （host） record for the computer to the appropriate DNS zone.
    • D、Configure the computer toObtain an IP address automatically.

    正确答案:B

  • 第16题：

    You have a server that runs Windows Server 2003 Service Pack 2 （SP2）.You discover that the server has a large number of open connections that originate from the IP address 192.168.1.121. You need to identify the host name of the computer that uses the IP address 192.168.1.121. Which command should you run？（）

    • A、Arp–a
    • B、Netstat-r
    • C、Net view//192.168.1.121
    • D、Ping–a 192.168.1.121

    正确答案:D

  • 第17题：

    You are the network administrator for Company. Company has recently upgraded its network to a 100Mbps standard and you are now in the process of removing all the old adapter and installing a new Token Ring network adapter into the Windows 2000 Professional computer. On the first computer you install the new hardware and configure the static TCP/IP protocol settings to be the same as they were for the previously installed network adapter. When you restart the computer, however, you cannot access the network. You try to ping your network adapter's TCP/IP address locally. You receive the following error message: "Request timed out." You want to enable the computer to communicate on the new network. What should you do? （）

    • A、Enable DHCP in the TCP/IP properties.
    • B、Replace the Token Ring network adapter with an Ethernet network adapter.
    • C、Configure a different TCP/IP address on the same subnet.
    • D、Configure a valid DNS Server in the TCP/IP properties.

    正确答案:B

  • 第18题：

    Network topology exhibit: You are the administrator at ExamSheet.net.  You use TCP/IP as the only protocol on your network. The network is configured as in the network topology exhibit. All existing computers and devices use 255.255.240.0 as the subnet mask. You install Windows 2000 Professional on a computer named ExamSheet2. You configure ExamSheet2 to have a TCP/IP address of 10.10.20.234, a default gateway of 10.10.20.1, a subnet mask of 255.255.0.0 and a WINS server address of 10.10.13.10. You cannot connect to  shared resources on ExamSheetB by using its UNC name. You want ExamSheet2 to be able to connect to ExamSheetB. What should you do? （）

    • A、Install a WINS server on the same segment as Company2
    • B、Install and configure a DNS server and configure Company2 to use the DNS Server service.
    • C、Configure Company2 with a default gateway address 10.10.13.1.
    • D、Configure Company2 with a default gateway address of 10.10.30.1.
    • E、Configure Company2 with a TCP/IP address of 10.10.20.234.

    正确答案:E

  • 第19题：

    单选题
    Users have reported that they cannot access certain Internet sites. An administrator wants to test that the sites are properly resolving to an IP address.  Which of the following tools would allow the administrator to test name resolution？（）
    A

     net view

    B

     ipconfig

    C

     dig

    D

     ifconfig


    正确答案： C
    解析： 暂无解析

  • 第20题：

    多选题
    Your routed TCP/IP network consists of 10 Windows 2000 Server computers and 75 Windows 2000 Professional computers. Your network uses TCP/IP as the only network protocol. You are installing 10 new Windows 2000 Professional computers. You want to enable the new computers to use NetBIOS names to connect to all shared resources as the network. You configure a TCP/IP address and a subnet mask on each new computer. Which 2 additional TCP/IP properties should you configure on each new computer？（）
    A

    The bindings.

    B

    A DNS address.

    C

    A Gateway address.

    D

    A WINS server address.

    E

    A DHCP server address.


    正确答案： C,E
    解析： 暂无解析

  • 第21题：

    单选题
    You are able to access a Web server from your computer by using the IP address of the Web server. You fail to access the Web server when you use its fully qualified domain name. Other users on your network can access the Web server by using both the IP address and the fully  qualified domain name. You need to access the Web server by using the fully qualified domain name.  What should you do？ （）
    A

    Use the Diagnose and repair feature in the Network and Sharing Center.

    B

    At the command prompt， type ipconfig /allcompartments.

    C

    Disable the NetBIOS feature on your network adapter.

    D

    Configure the correct default gateway on the Alternate Configuration tab of your network connection properties dialog box.


    正确答案： C
    解析： 暂无解析

  • 第22题：

    单选题
    You want to implement IP address to Computer Name resolving on your Windows 2000 network. How do you configure this in a NETBIOS environment？（）
    A

    Install a DHCP Server

    B

    Install a DNS Server

    C

    Install a WINS Server

    D

    Install an LMHOST Converter


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    You are the administrator of a Windows 2000 network. You install Windows 2000 Professional on a new computer and configure the TCP/IP settings to have a static IP address. While testing network connectivity from the new computer, you discover an error in the DNS server address that is configured in the TCP/IP settings. You configure the correct DNS server address, which is 10.1.1.5. However, you are still unable to successfully connect to network resources by name. You run the IPconfig/all command. The results indicate that the DNS server address is now configured as 0.0.0.0 You need to ensure that the computer can connect to network resources by name. What should you do?（）
    A

    Stop and restart the DNS Client service.

    B

    Add 10.1.1.5 to the DNS server list on the TCP/IP Advanced Properties tab.

    C

    Add an A （host） record for the computer to the DNS server’s zone file.

    D

    Configure your DHCP server to have a DNS server address of 10.1.1.5.


    正确答案： C
    解析： 暂无解析

相关内容