Which command will set the core size file to unlimited for the user‘webapp’？（）A、no -p 'core=-1' webappB、chuser 'core=-1' webappC、setsenv -attr 'core=unlimited' webappD、chsec -f '/etc/security/limits' 'core=-1' webapp

题目

Which command will set the core size file to unlimited for the user‘webapp’？（）

  • A、no -p 'core=-1' webapp
  • B、chuser 'core=-1' webapp
  • C、setsenv -attr 'core=unlimited' webapp
  • D、chsec -f '/etc/security/limits' 'core=-1' webapp
相似考题

1.Whatstatementistrueregardingprocessorallocationwhenimplementingmicro－partitions?()A.Theminimumconfigurablecapacityallocationis1.0coreandtheminimumincrementis0.1core.B.Theminimumconfigurablecapacityallocationis0.1coreandtheminimumincrementis0.01core.C.Theminimumconfigurablecapacityallocationis1.0coreandtheminimumincrementis0.01core.D.Theminimumconfigurablecapacityallocationis0.1coreandtheminimumincrementis0.001

2.Which of the following is a characteristic of a data center core?()A. Server-to-server traffic always remains in the core layer.B. The recommended practice is for the core infrastructure to be in Layer 3.C. The boundary between Layer 2 and Layer 3 should be implemented in the aggregation layer.D. The Cisco Express Forwarding hashing algorithm is the default, based on the IP address and Layer 4 port.E. Core layer should run BGP along with an IGP becauseiBGP has a lower administrative distance than any IGP.

3.Refer to the exhibit. Which recommended practice is applicable?()A. If no core layer is deployed, the design will be easier to scale.B. If no core layer is deployed, there will be fewer cabling requirements.C. If no core layer is deployed, the distribution switches should not be fully meshed.D. A dedicated campus core layer is not needed for connecting fewer than five buildings.E. A dedicated campus core layer should be deployed for connecting three or more buildings.

4.Afilenamed"core"existsinthecurrentdirectory.Whichofthefollowingcommandsshouldbeusedtodeterminewhatcreatedthe"core"file?()A.dump-tcoreB.stringscoreC.trace-acoreD.crashcore/unix_up

更多“Which command will set the core size file to unlimited for the user‘webapp’？（）A、no -p 'core=-1' webappB、chuser 'core=-1' webappC、setsenv -attr 'core=unlimited' webappD、chsec -f '/etc/security/limits' 'core=-1' webapp”相关问题

  • 第1题：

    The switches shown in the diagram, Core and Core2, are both Catalyst 2950s. The addressing scheme for each company site is as follows:Router Ethernet port - 1st usable addressCore - 2nd usable addressCore2 - 3rd usable addressFor this network, which of the following commands must be configured on Core2 to allow it to be managed remotely from any subnet on the network? （）

    A.Core2(config)# interface f0/0 Core2(config-if)# ip address 192.168.1.10 255.255.255.248

    B.Core2(config)# interface vlan 1 Core2(config-if)# ip address 192.168.1.11 255.255.255.248

    C.Core2(config)# line con 0 Core2(config-line)# password cisco

    D.Core2(config)# line vty 0 4 Core2(config-line)# password cisco

    E.Core2(config)# ip default-gateway 192.168.1.9

    F.Core2(config)# ip route 0.0.0.0 0.0.0.0 192.168.1.8


    参考答案：B, D, E

  • 第2题：

    To which switch or switches should you provide redundant links in order to achieve high availability with reliable fast convergence in the enterprise campus？（）

    • A、 to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 2 link
    • B、 to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 3 link
    • C、 to two core switches from redundant distribution switches connected with Layer 2 link
    • D、 to two core switches from redundant distribution switches connected with Layer 3 link
    • E、 to two core switches running Cisco NSF and SSO from two redundant distribution switches running Cisco NSF and SSO

    正确答案:D

  • 第3题：

    POWER7刀片中性能最好的PS704的CPU配置是：（）

    • A、16core 3.0GHz
    • B、32core 2.4GHz
    • C、32core 3.0GHz
    • D、16core 2.4GHz

    正确答案:B

  • 第4题：

    查看IHUB 内存的命令

    • A、show core1-uptime
    • B、show system core1-cpu
    • C、show system core1-memory-pools

    正确答案:C

  • 第5题：

    A Host connected to an NPV switch is not able to see the storage connected to the core switch. Given the output of the show command below， what is the reason of this issue？（） switch# show npv status  npiv is enabled  External Interfaces：   ===============  InterfacE. fc1/1， VSAN： 1， FCID. 0x000000， StatE. Other   Number of External Interfaces： 4 

    • A、 NPV is not enabled on the core switch？
    • B、 The interface connected to the Core switch is in admin down state
    • C、 The local host interface belongs to the wrong VSAN？
    • D、 The local host interface is not able to login

    正确答案:B

  • 第6题：

    What statement is true regarding processor allocation when implementing micro-partitions？ （）

    • A、 The minimum configurable capacity allocation is 1.0 core and the minimum increment is 0.1 core.
    • B、 The minimum configurable capacity allocation is 0.1 core and the minimum increment is 0.01 core.
    • C、 The minimum configurable capacity allocation is 1.0 core and the minimum increment is 0.01 core.
    • D、 The minimum configurable capacity allocation is 0.1 core and the minimum increment is 0.001

    正确答案:B

  • 第7题：

    A customer has just purchased an 8-core POWER 570 which has two dual port 1 Gbps  Integrated Virtual Ethernet （IVE） adapters. The customer wants to implement queue pairs （QPs） to take advantage of parallel processing of network traffic to its client logical partitions. Assuming that the system is to utilize the IVEs in both CECs，  which configuration will allow a logical partition to utilize the entire eight cores for network traffic processing？（）

    • A、 Set Multiple Core Scaling （MCS） value of the port group to 8 and set multiple core parameter of the client Ethernet adapters to yes.
    • B、 Set Multiple Core Scaling （MCS） value of the port group to 4 and set multiple core parameter of the client Ethernet adapters to yes.
    • C、 Set Multiple Core Scaling （MCS） value of one of the physical port groups to 4 and set multiple core parameter of the client Ethernet adapters to yes.
    • D、 Set Multiple Core Scaling （MCS） value of one of the physical port groups to 8 and set the multiple core parameter of the client Ethernet adapters to yes.

    正确答案:A

  • 第8题：

    Intel推出的Core系列CPU，大部分集成了显示核心，此系列是。（）

    • A、Core I3
    • B、Core I3、I5、I7
    • C、Core I3与I5
    • D、Core I5

    正确答案:B

  • 第9题：

    下列哪些型号的CPU采用了Yonah核心（）

    • A、Core Duo
    • B、Core Solo
    • C、Celeron M
    • D、Celeron D

    正确答案:A,B,C

  • 第10题：

    单选题
    Which command will set the core size file to unlimited for the user‘webapp’？（）
    A

    no -p 'core=-1' webapp

    B

    chuser 'core=-1' webapp

    C

    setsenv -attr 'core=unlimited' webapp

    D

    chsec -f '/etc/security/limits' 'core=-1' webapp


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    A file named "core" exists in the current directory.  Which of the following commands should be used to determine what created the "core" file?（）
    A

     dump -t core 

    B

     strings core 

    C

     trace -a core 

    D

     crash core /unix_up


    正确答案： C
    解析： 暂无解析

  • 第12题：

    单选题
    To which switch or switches should you provide redundant links in order to achieve high availability with reliable fast convergence in the enterprise campus?（）
    A

    to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 2 link

    B

    to a core switch running Cisco NSF and SSO from redundant distribution switches connected with a Layer 3 link

    C

    to two core switches from redundant distribution switches connected with a Layer 2 link

    D

    to two core switches from redundant distribution switches connected with a Layer 3 link

    E

    to two core switches running Cisco NSF and SSO from two redundant distribution switches running Cisco NSF and SSO


    正确答案： A
    解析： 暂无解析

  • 第13题：

    什么是知识产权核（Intellectual Property Core，简称IP Core）？指出“软知识产权核（Soft IP Core）”、“硬知识产权核（Hard IP Core）”、“固知识产权核（Firm IP Core）”的意义和差别。


    正确答案: 知识产权核是一种预先设计好的甚至已经过验证的具有某种特定功能的集成电路、器件或部件
    软核：主要描述功能，以HDL（硬件描述语言）文本形式提交给用户
    固核：主要描述结构，介于软核和硬核之间，以门电路级网表的形式提供给用户
    硬核：基于物理描述，并已经过工艺验证，以电路物理结构掩模版图和全套工艺文件提供给用户

  • 第14题：

    下列不属于CoreOS层的是？（）

    • A、Accelerate
    • B、Core Bluetooth
    • C、Core Data
    • D、Security

    正确答案:C

  • 第15题：

    整个iPhone的操作系统包括（）

    • A、Core OS
    • B、Core Serives
    • C、Core Data
    • D、Media
    • E、Cocoa Touch

    正确答案:A,B,D,E

  • 第16题：

    查看ihub内存的命令（）

    • A、show corel-uptime
    • B、show system core1-cpu
    • C、show system core1-memory-pools

    正确答案:C

  • 第17题：

    Which system provides the highest performance per core, and the least cost for applications licensed per core?（）

    • A、A Power 795 with MaxCore mode
    • B、A Power 780 with MaxCore mode
    • C、A Power 755 with TurboCore mode
    • D、A Power 780 with TurboCore mode

    正确答案:D

  • 第18题：

    Customers looking to utilize quad-core processors in a blade environment should use which of the following power saving options？（）

    • A、IBM HS21 - Quad-core processor designed for 4-way servers
    • B、IBM x3850 Server - Quad-core LV processors
    • C、IBM LS41 - Quad-core processor designed for 4-way servers
    • D、IBM HS21 - Quad-core LV processors

    正确答案:D

  • 第19题：

    A file named "core" exists in the current directory.  Which of the following commands should be used to determine what created the "core" file?（）

    • A、 dump -t core 
    • B、 strings core 
    • C、 trace -a core 
    • D、 crash core /unix_up

    正确答案:B

  • 第20题：

    You executed the following command to back up your control file：  ALTER DATABASE BACKUP CONTROLFILE TO TRACE；  Which initialization parameter is used to specify the location of the trace file？（）

    • A、USER_DUMP_DEST
    • B、CORE_DUMP_DEST
    • C、TRACE_DUMP_DEST
    • D、BACKUP_DUMP_DEST
    • E、BACKGROUND_DUMP_DEST

    正确答案:A

  • 第21题：

    Core files required for user applications are stored in which of the following locations?（）

    • A、Program files
    • B、Temporary files
    • C、Windows
    • D、Documents and settings

    正确答案:A

  • 第22题：

    单选题
    A Host connected to an NPV switch is not able to see the storage connected to the core switch. Given the output of the show command below， what is the reason of this issue？（） switch# show npv status  npiv is enabled  External Interfaces：   ===============  InterfacE. fc1/1， VSAN： 1， FCID. 0x000000， StatE. Other   Number of External Interfaces： 4
    A

     NPV is not enabled on the core switch？

    B

     The interface connected to the Core switch is in admin down state

    C

     The local host interface belongs to the wrong VSAN？

    D

     The local host interface is not able to login


    正确答案： C
    解析： 暂无解析

  • 第23题：

    单选题
    What is an advantage of having wire rope with a fiber core over that of a wire rope of the same size with a wire core（）.
    A

    Fiber core rope offers greater strength

    B

    Fiber core rope offers greater flexibility

    C

    Fiber core rope can be used at higher operating temperatures

    D

    Fiber core rope is the only type authorized for cargo runners


    正确答案： C
    解析： 暂无解析

相关内容