A system administrator has added a new graphics card to the system and rebooted. The system pauses with C31 in the three-digit displays. Which of the following causes could be the reason for the hang?（）A、All filesets for CDE have not been loaded. Boot int

题目

A system administrator has added a new graphics card to the system and rebooted. The system pauses with C31 in the three-digit displays. Which of the following causes could be the reason for the hang?（）

  • A、All filesets for CDE have not been loaded. Boot into maintenance mode and load them through SMIT.
  • B、There is a missing device driver, incorrect console configuration, or a serial device plugged into native S1 port.
  • C、The new graphics adapter card is marked defined, not available. Rum smit cfgmgr (Install/Configure Devices Added After IPL with the INPUT device /directory for software set to none). This will reconfigure all devices by walking the bus.
  • D、The LED C31 means that there is a corrupted /dev/hd5. Boot into maintenance mode, fsck /dev/hd5 and then issue the bosboot command.
相似考题

1.Given that the current directory is empty, and that the user has read and write privileges to the current, and the following:Which statement is true?()A.Compilation fails.B.Nothing is added to the file system.C.Only a new file is created on the file system.D.Only a new directory is created on the file system.E.Both a new file and a new directory are created on the file system.

2.The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）A.It is a hardware problem caused by the power failure.B.There is a network problem, most probably with name resolution.C.Sine the system was never rebooted, devices are marked defined instead of available and need to be activated.D.Some filesets may be marked as broken and need to be reinstalled.

3.A medical customer has a rack with four BladeCenter H chassis that have been operating normally for several months. After installing a new rack of servers in the data center, the system administrator notices the blowers in the BladeCenters have increased their speed. Which of the following caused this problem? （）A、The room temperature has reached 23C (73.4F). B、A Blade within the chassis has been shut down. C、The ambient temperature in the data center has increased D、One of the additional System X servers in the BladeCenter rack has failed.

4.A graphics card has been added and the system rebooted. When running the lsdev－Cc adapter, the graphics card is not listed in the output. Which of the following actions should be performed?()A.Reboot system sing the mkdev -l command.B.Install device support suing the cfgmgr -i command.C.Use the SMIT console to redirect the console.D.Use SMIT devices and choose the correct adapter.

参考答案和解析
正确答案:B
更多“A system administrator has added a new graphics card to the system and rebooted. The system pauses with C31 in the three-digit displays. Which of the following causes could be the reason for the hang?（）A、All filesets for CDE have not been loaded. Boot int”相关问题

  • 第1题：

    A System p administrator needs to document system changes that have occurred recently. The company has a policy of making all possible changes via the smit interface.  Which of the following files would show the commands that have been performed from within smit and their resulting output（）

    • A、/smit.log
    • B、/smit.script
    • C、/var/log/smit.log
    • D、/.history

    正确答案:A

  • 第2题：

    An administrator has added a new device to a system and wants to determine if it has been correctly added to the ODM database. Which command would the system administrator use？（）

    • A、odmget
    • B、odmadd
    • C、odmshow
    • D、odmcreate

    正确答案:A

  • 第3题：

    A graphics card has been added to the system. After rebooting, the system hangs during the login process with a blue screen indicating "CDE please wait". Which of the following procedures should be performed next?（）

    • A、Reinstall the CDE software
    • B、Check the name resolution
    • C、Uncomment the last line in .dtprofile
    • D、Boot in maintenance mode and perform fsck on file systems

    正确答案:A

  • 第4题：

    A server technician has been attempting to install an operating system on the company test server for several days. The technician has experienced error messages at several points of theinstallation and the system has frozen during various parts of the boot process. The technician has replaced the power supply， graphics card and installation disk with known good components.Which of the following could be causing these issues？（）

    • A、Storage driver not loaded
    • B、Fragmented hard drive
    • C、Damaged or faulty NIC chipset
    • D、Damaged or faulty system board
    • E、Memory incompatible with the processor
    • F、Missing voltage regulator

    正确答案:D,E

  • 第5题：

    An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system.  Which of the following is the MOST probable cause？（）

    • A、The BIOS is set with the wrong boot order.
    • B、The jumpers have not been set on the hard drive.
    • C、The hard drive is not compatible with the system board.
    • D、The boot.ini file needs to be modified.

    正确答案:A

  • 第6题：

    A patch has been applied to the operating system.  After rebooting, the system is hung.  Which of the following commands should have been performed to prevent the system from hanging?（）

    • A、 lppchk, bosboot 
    • B、 lslpp -l, oslevel 
    • C、 installp -C, lppchk 
    • D、 bosboot, synclvodm 

    正确答案:A

  • 第7题：

    A System p administrator has been instructed to verify that all filesets have all required requisitesand are completely installed. Which of the following commands will provide this information（）

    • A、lslpp
    • B、lppchk
    • C、geninstall
    • D、installp

    正确答案:B

  • 第8题：

    A new application has been added to a system which needs to automatically be started at system startup. The system administrator has decided to accomplish this by using the /etc/inittab file. Which command would be used to accomplish this in a supported manner？（）

    • A、vi
    • B、mkitab
    • C、telinit
    • D、startsrc

    正确答案:B

  • 第9题：

    You have been recently hired as a database administrator. Your senior manager asks you to study the production database server and submit a report on the settings done by the previous DBA.  While observing the server settings， you find that the following parameter has been set in the parameter file of the database：  REMOTE_OS_AUTHENT = TRUE  What could have been the reason to set this parameter as TRUE？（）

    • A、to enable operating system authentication for a remote client
    • B、to restrict the scope of administration to identical operating systems
    • C、to allow the start up and shut down of the database from a remote client
    • D、to enable the administration of the operating system from a remote client
    • E、to disable the administration of the operating system from a remote client

    正确答案:A

  • 第10题：

    单选题
    The system administrator did a new install of AIX on a server about a week ago. The system was not rebooted after the installation. CDE is running on this system as is TCPIP. The system administrator has started configuring the system percompany directives. The power cable was inadvertently disconnected from the wall causing the sever to lose power. Upon reboot, the system appears to hang during log in from the console or from Xterminals. Which of the following is the most probable cause?（）
    A

    It is a hardware problem caused by the power failure.

    B

    There is a network problem, most probably with name resolution.

    C

    Sine the system was never rebooted, devices are marked defined instead of available and need to be activated.

    D

    Some filesets may be marked as broken and need to be reinstalled.


    正确答案： C
    解析： 暂无解析

  • 第11题：

    单选题
    An administrator adds a new SATA hard drive into a functional server and attempts to boot the server. The server will no longer boot into the operating system. The administrator checks all the connections and reboots the server. The server still will not load the operating system.  Which of the following is the MOST probable cause？（）
    A

    The BIOS is set with the wrong boot order.

    B

    The jumpers have not been set on the hard drive.

    C

    The hard drive is not compatible with the system board.

    D

    The boot.ini file needs to be modified.


    正确答案： A
    解析： 暂无解析

  • 第12题：

    单选题
    A system administrator has added a new graphics card to the system and rebooted. The system pauses with C31 in the three-digit displays. Which of the following causes could be the reason for the hang?（）
    A

    All filesets for CDE have not been loaded. Boot into maintenance mode and load them through SMIT.

    B

    There is a missing device driver, incorrect console configuration, or a serial device plugged into native S1 port.

    C

    The new graphics adapter card is marked defined, not available. Rum smit cfgmgr (Install/Configure Devices Added After IPL with the INPUT device /directory for software set to none). This will reconfigure all devices by walking the bus.

    D

    The LED C31 means that there is a corrupted /dev/hd5. Boot into maintenance mode, fsck /dev/hd5 and then issue the bosboot command.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    A system administrator has been instructed to verify that all filesets have all required requisites and are completely installed. Which command will provide this information？（）

    • A、lslpp
    • B、lppchk
    • C、instfix
    • D、installp

    正确答案:B

  • 第14题：

    Which of the following could the system administrator use to assist in debugging boot problems after the system is up？（）

    • A、SMS
    • B、alog
    • C、fsck
    • D、bosboot

    正确答案:B

  • 第15题：

    An administrator logs into a server and notices slow performance.  When the system finishes the logon process a message is displayed saying the system is out of Virtual Memory.  Which of the following is the MOST likely cause of this issue？（）

    • A、The drives have been configured as basic.
    • B、The system partition with the page file is out of space.
    • C、The VMFS has bad sectors.
    • D、The drivers for the memory have become corrupt.

    正确答案:B

  • 第16题：

    A blade server has been configured to boot from SAN.  After an HBA firmware upgrade the blade was rebooted and cannot find the operating system.  Which of the following should the administrator do NEXT to troubleshoot the issue？（）

    • A、Verify all HBA settings.
    • B、Upgrade the blade firmware.
    • C、Upgrade the OS level HBA drivers.
    • D、Set the system to boot from the local disk.

    正确答案:A

  • 第17题：

    A technician installs a SATA controller card and moves the hard drive cable from the system board to the SATA controller. The system POSTs and the controller BIOS recognizes the hard drive but does not boot to the hard drive and start Windows. Which of the following is the MOST likely cause of the problem？（）

    • A、Windows cannot be booted from a controller card.
    • B、The hard drive must have Windows reinstalled because a new controller card was installed.
    • C、The SATA controller card was not set as a boot device in the computer BIOS.
    • D、The new controller must have the correct jumper settings for Windows mode.

    正确答案:C

  • 第18题：

    A graphics card has been added and the system rebooted. When running the lsdev-Cc adapter, the graphics card is not listed in the output. Which of the following actions should be performed?（）

    • A、Reboot system sing the mkdev -l command.
    • B、Install device support suing the cfgmgr -i command.
    • C、Use the SMIT console to redirect the console.
    • D、Use SMIT devices and choose the correct adapter.

    正确答案:B

  • 第19题：

    A System p administrator has just installed a new technology level， but "oslevel -r" does not show the expected technology level.  Which of the following commands would determine which filesets are downlevel（）

    • A、lppchk
    • B、instfix
    • C、oslevel
    • D、installp

    正确答案:B

  • 第20题：

    A system administrator has added a new port entry in /etc/services for a new application to be tested. Which of the following commands should be used to activate this port？（）

    • A、telinit -q
    • B、refresh -s inetd
    • C、startsrc -g services
    • D、refresh -s portmap

    正确答案:B

  • 第21题：

    多选题
    A server technician has been attempting to install an operating system on the company test server for several days. The technician has experienced error messages at several points of theinstallation and the system has frozen during various parts of the boot process. The technician has replaced the power supply， graphics card and installation disk with known good components.Which of the following could be causing these issues？（）
    A

    Storage driver not loaded

    B

    Fragmented hard drive

    C

    Damaged or faulty NIC chipset

    D

    Damaged or faulty system board

    E

    Memory incompatible with the processor

    F

    Missing voltage regulator


    正确答案： D,A
    解析： 暂无解析

  • 第22题：

    单选题
    A graphics card has been added to the system. After rebooting, the system hangs during the login process with a blue screen indicating "CDE please wait". Which of the following procedures should be performed next?（）
    A

    Reinstall the CDE software

    B

    Check the name resolution

    C

    Uncomment the last line in .dtprofile

    D

    Boot in maintenance mode and perform fsck on file systems


    正确答案： D
    解析： 暂无解析

  • 第23题：

    单选题
    A System p administrator needs to document system changes that have occurred recently. The company has a policy of making all possible changes via the smit interface.  Which of the following files would show the commands that have been performed from within smit and their resulting output（）
    A

    /smit.log

    B

    /smit.script

    C

    /var/log/smit.log

    D

    /.history


    正确答案： D
    解析： 暂无解析

相关内容