RIP version 2 is being used as the routing protocol within the Testking network.What does RIP version 2 use to prevent routing loops?（）A、CIDRB、Split horizonC、AuthenticationD、Classless maskingE、Hold-down timersF、Multicast routing updatesG、Path Vectoring

题目

RIP version 2 is being used as the routing protocol within the Testking network.What does RIP version 2 use to prevent routing loops?（）

  • A、CIDR
  • B、Split horizon
  • C、Authentication
  • D、Classless masking
  • E、Hold-down timers
  • F、Multicast routing updates
  • G、Path Vectoring
相似考题

1.如何配置Rip版本2?()A.ipripsendv1B.ipripsendv2C.ipripsendversion2D.version2

2.Refer to the exhibit. What statement is true base d upon the configuration in the exhibit? ()A. CGMP version 2 is being used.B. The switch will use sparse mode first, dense mode second.C. A rendezvous point must be configured in order for the interface to operate in sparse mode.D. IGMP version 2 is being used.E. The rendezvous point is IP address 172.16.4.16.F. If a rendezvous point is configured, the interface cannot operate in dense mode.

3.Which dynamic routing protocol should be recommended for the Testking networkshown in the graphic above?()A. OSPFB. RIP version 1C. RIP version 2D. IGRPE. EIGRP

4.Which three RIP features are supported on the WX or WXC device? ()(Choose three.)A. SHA-1B. MD5 authenticationC. version 1 messagesD. version 2 messagesE. plain-text authentication

参考答案和解析
正确答案:B,E
更多“RIP version 2 is being used as t”相关问题

  • 第1题：

    The Testking Network consists of the following 5 IP networks:NETWORK 1: 192.168.10.0/26NETWORK 2: 192.168.10.64/27NETWORK 3: 192.168.10.96/27NETWORK 4: 192.168.10.128/30NETWORK 5: 192.168.10.132/30Which of the following routing protocols will support this IP addressing scheme?（）

    A. RIP version 1

    B. RIP version 2

    C. IGRP

    D. EIGRP

    E. OSPF

    F. BGP


    参考答案：B, D, E

  • 第2题：

    The network administrator needs to address seven LANs. RIP version 1 is the only routing protocol in use on the network and subnet 0 is not being used. What is the maximum number of usable IP addresses that can be supported on each LAN if the organization is using one class C address block?（）

    A.8

    B.6

    C.30

    D.32

    E.14

    F.16


    参考答案：C

  • 第3题：

    管理员小李要为三层交换机配置支持VLSM的ripv2，并发布192.168.1.0/24的网络，则正确的是（ ）

    A.[Huawei]rip
    [Huawei-rip-1]version 2
    [Huawei-rip-1]network 192.168.1.0 255.255.255.0
    B.[Huawei]rip
    [Huawei-rip-1]version 2
    [Huawei-rip-1]network 192.168.1.0 24
    C.[Huawei]rip
    [Huawei-rip-1]version 2
    [Huawei-rip-1]network 192.168.1.0 0.0.0.255
    D.[Huawei]rip
    [Huawei-rip-1]version 2
    [Huawei-rip-1]network 192.168.1.0

    答案：D
    解析：
    虽然ripv2支持vlsm，但是在发布网络中使用的classful的，因此不需要制定子网掩码。

  • 第4题：

    Which three statements are correct about RIP version 2 (Choose three.)（）。

    • A、It has the same maximum hop count as version 1
    • B、It uses broadcasts for its routing updates
    • C、It is a classless routing protocol
    • D、It has a lower default administrative distance than RIP version 1
    • E、It supports authentication
    • F、It does not send the subnet mask in updates

    正确答案:A,C,E

  • 第5题：

    Which three statements are correct about RIP version 2? (Choose three.)（）

    • A、It has the same maximum hop count as version 1.
    • B、It uses broadcasts for its routing updates.
    • C、It is a classless routing protocol.
    • D、It has a lower default administrative distance than RIP version 1.
    • E、It supports authentication.
    • F、It does not send the subnet mask in updates.

    正确答案:A,C,E

  • 第6题：

    Multicast is being deployed in the network， and only ip pim sparse-dense mode has been configured on all interfaces in the network to support a new video streaming application. No other multicast configuration was applied anywhere in the network. Since enabling multicast， the network monitoring tools show periodic spikes in link utilization throughout the network， even in areas where the video application is not being used. What could be a possible cause？（）

    • A、PIM sparse mode is being used.
    • B、PIM dense mode is being used.
    • C、The BGP multicast address family has not been configured.
    • D、IGMP version 3 is being used.
    • E、IP PIM neighbor filters have not been applied.

    正确答案:B

  • 第7题：

    The Company switches have all been upgraded to use VTP version 2. What are two benefits  provided in VTP Version 2 that are not available in VTP Version 1？（）

    • A、VTP version 2 supports Token Ring VLANs
    • B、VTP version 2 allows VLAN consistency checks
    • C、VTP version 2 allows active redundant links when used with spanning tree
    • D、VTP version 2 reduces the amount of configuration necessary
    • E、VTP version 2 saves VLAN configuration memory

    正确答案:A,B

  • 第8题：

    Which three RIP features are supported on the WX or WXC device? （）(Choose three.)

    • A、SHA-1
    • B、MD5 authentication
    • C、version 1 messages
    • D、version 2 messages
    • E、plain-text authentication

    正确答案:C,D,E

  • 第9题：

    单选题
    You are a network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2003. The company’s main office is in Barcelona， and it has branch offices in Paris and London. The company has no immediate plans to expand or relocate the offices.   The company wants to connect the office networks by using a frame relay WAN connection and Routing and Remote Access servers that are configured with frame relay WAN adapters. Computers in each office will be configured to use the local Routing and Remote Access server as a default gateway. You are planning the routing configuration for the Routing and Remote Access servers.   You need to allow computers in Barcelona， Paris， and London to connect to computers in any office. You want to minimize routing traffic on the WAN connection.   What should you do？  （）
    A

     At each office， add the OSPF routing protocol to Routing and Remote Access， add the WAN adapter to the OSPF routing protocol， and deploy OSPF as a single-area internetwork.

    B

     At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 broadcast and the incoming packet protocol as RIP version 1 and 2.

    C

     At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 multicast and the incoming packet protocol as RIP version 2 only.

    D

     At each office， configure the Routing and Remote Access server with static routes to the local networks at the other two offices.


    正确答案： D
    解析： 暂无解析

  • 第10题：

    多选题
    RIP version 2 is being used as the routing protocol within the Testking network.What does RIP version 2 use to prevent routing loops?（）
    A

    CIDR

    B

    Split horizon

    C

    Authentication

    D

    Classless masking

    E

    Hold-down timers

    F

    Multicast routing updates

    G

    Path Vectoring


    正确答案： F,C
    解析： 暂无解析

  • 第11题：

    多选题
    Which three statements are correct about RIP version 2? (Choose three.)（）
    A

    It has the same maximum hop count as version 1.

    B

    It uses broadcasts for its routing updates.

    C

    It is a classless routing protocol.

    D

    It has a lower default administrative distance than RIP version 1.

    E

    It supports authentication.

    F

    It does not send the subnet mask in updates.


    正确答案： D,F
    解析： 暂无解析

  • 第12题：

    单选题
    The network administrator needs to address seven LANs. RIP version 1 is the only routing protocol in use on the network and subnet 0 is not being used. What is the maximum number of usable IP addresses that can be supported on each LAN if the organization is using one class C address block?（）
    A

    8

    B

    6

    C

    30

    D

    32

    E

    14

    F

    16


    正确答案： D
    解析： 暂无解析

  • 第13题：

    RIP version 2 is being used as the routing protocol within the Testking network.What does RIP version 2 use to prevent routing loops?()

    A. CIDR

    B. Split horizon

    C. Authentication

    D. Classless masking

    E. Hold-down timers

    F. Multicast routing updates

    G. Path Vectoring


    参考答案：B, E

  • 第14题：

    Refertotheexhibit.Tworoutershavejustbeenconfiguredbyanewtechnician.Allinterfacesareup.However,theroutersarenotsharingtheirroutingtables.Whatistheproblem?()

    A.Split horizon is preventing Router2 from receiving routing information from Router1.

    B.Router1 is configured for RIP version 2,and Router2 is configured forRIP version 1.

    C.Router1 has an ACL that is blocking RIP version 2.

    D.There is a physical connectivity problem between Router1 and Router2.

    E.Router1 is using authentication and Router2 is not.


    参考答案：B

  • 第15题：

    Which three protocols use TLVs to carry attributes？（）

    • A、Cisco Discovery Protocol
    • B、Label Discovery Protocol
    • C、Border Gateway Protocol
    • D、OSPF
    • E、RIP version 2

    正确答案:A,B,C

  • 第16题：

    Which three statements describe the differences between RIP version 1 and RIP version 2? (Choose three.)（）

    • A、RIP version 1 broadcasts updates whereas RIP version 2 uses multicasts.
    • B、RIP version 1 multicasts updates while RIP version 2 uses broadcasts.
    • C、Both RIP version 1 and RIP version 2 are classless routing protocols.
    • D、RIP Version 2 is a classless routing protocol whereas RIP version 1 is a classful routing protocol.
    • E、Both RIP version 1 and version 2 support authentication.
    • F、RIP version 2 sends the subnet mask in updates and RIP version 1 does not.

    正确答案:A,D,F

  • 第17题：

    如何配置RIP版本2？（）

    • A、ip rip send v1
    • B、ip rip send v2
    • C、ip rip send version 2
    • D、version 2

    正确答案:D

  • 第18题：

    The Testking Network consists of the following 5 IP networks: NETWORK 1: 192.168.10.0/26 NETWORK 2: 192.168.10.64/27 NETWORK 3: 192.168.10.96/27 NETWORK 4: 192.168.10.128/30 NETWORK 5: 192.168.10.132/30 Which of the following routing protocols will support this IP addressing scheme?（）

    • A、RIP version 1
    • B、RIP version 2
    • C、IGRP
    • D、EIGRP
    • E、OSPF
    • F、BGP

    正确答案:B,D,E

  • 第19题：

    Which routing protocols will support the following IP addressing scheme? （） Network 1 - 192.168.10.0 /26 Network 2 - 192.168.10.64 /27 Network 3 - 192.168.10.96 /27 Network 4 - 192.168.10.128 /30 Network 5 - 192.168.10.132 /30

    • A、RIP version 1
    • B、RIP version 2
    • C、IGRP
    • D、EIGRP
    • E、OSPF

    正确答案:B,D,E

  • 第20题：

    You are a network administrator for your company. The network consists of a single Active Directory domain. All servers run Windows Server 2003. The company’s main office is in Barcelona， and it has branch offices in Paris and London. The company has no immediate plans to expand or relocate the offices.   The company wants to connect the office networks by using a frame relay WAN connection and Routing and Remote Access servers that are configured with frame relay WAN adapters. Computers in each office will be configured to use the local Routing and Remote Access server as a default gateway. You are planning the routing configuration for the Routing and Remote Access servers.   You need to allow computers in Barcelona， Paris， and London to connect to computers in any office. You want to minimize routing traffic on the WAN connection.   What should you do？  （）

    • A、 At each office， add the OSPF routing protocol to Routing and Remote Access， add the WAN adapter to the OSPF routing protocol， and deploy OSPF as a single-area internetwork.
    • B、 At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 broadcast and the incoming packet protocol as RIP version 1 and 2.
    • C、 At each office， add the RIP version 2 routing protocol to Routing and Remote Access， and configure the WAN adapter to use RIP version 2. Configure the outgoing packet protocol as RIP version 2 multicast and the incoming packet protocol as RIP version 2 only.
    • D、 At each office， configure the Routing and Remote Access server with static routes to the local networks at the other two offices.

    正确答案:D

  • 第21题：

    单选题
    如何配置RIP版本2？（）
    A

    ip rip send v1

    B

    ip rip send v2

    C

    ip rip send version 2

    D

    version 2


    正确答案： C
    解析： 暂无解析

  • 第22题：

    多选题
    Which three statements describe the differences between RIP version 1 and RIP version 2? (Choose three.)（）
    A

    RIP version 1 broadcasts updates whereas RIP version 2 uses multicasts.

    B

    RIP version 1 multicasts updates while RIP version 2 uses broadcasts.

    C

    Both RIP version 1 and RIP version 2 are classless routing protocols.

    D

    RIP Version 2 is a classless routing protocol whereas RIP version 1 is a classful routing protocol.

    E

    Both RIP version 1 and version 2 support authentication.

    F

    RIP version 2 sends the subnet mask in updates and RIP version 1 does not.


    正确答案： F,E
    解析： 暂无解析

  • 第23题：

    多选题
    Which three statements are correct about RIP version 2 (Choose three.)（）。
    A

    It has the same maximum hop count as version 1

    B

    It uses broadcasts for its routing updates

    C

    It is a classless routing protocol

    D

    It has a lower default administrative distance than RIP version 1

    E

    It supports authentication

    F

    It does not send the subnet mask in updates


    正确答案： B,E
    解析： 暂无解析

相关内容