A virtual port channel （vPC） allows links that are physically connected to two different Cisco Nexus devices to appear as a single port channel to a third device. Which are the mandatory steps for configuring vPC？ （）   A、 Enable feature vPCB、 Define domai

题目

A virtual port channel （vPC） allows links that are physically connected to two different Cisco Nexus devices to appear as a single port channel to a third device. Which are the mandatory steps for configuring vPC？ （）   

  • A、 Enable feature vPC
  • B、 Define domains
  • C、 Establish peer keepalive connectivity
  • D、 Create a peer link
  • E、 Configure the peer link as a trunk port
  • F、 Create port channels and vPCs
  • G、 Define port channel load-balancing method
  • H、 Make sure configurations are consistent
相似考题

1.A customer‘s application requires 30 virtual paths on a four port OC3 card.Which command allows this functionality?()A.AB.BC.CD.D

2.On Cisco Nexus 5000 Series Switches， where are the virtual output queues implemented， and what is the main purpose of virtual output queues？（）A、 on all ingress interfaces； to ensure maximum throughput on a per-egress， per-CoS basisB、 on all ingress interfaces； to provide independent congestion management and 16 queuesC、 on all egress interfaces； so that a congested egress port does not affect traffic directed to other egress portsD、 on all egress interfaces； to prevent head-of-line blocking by utilizing multiple virtual output queuesE、 on all egress interfaces； to be able to use EEE 802.1p CoS

3.Given a Cisco Unified Computing System， which is a valid port type in end-host mode？（）A、 ServerB、 End deviceC、 NodeD、 HostE、 Virtual

4.Acustomerwouldliketomonitortrafficthatis&eAcustomerwouldliketomonitortrafficthatisbeingsenttoaspecificvirtualmachinenamed VM001usingSPAN.ThecustomerhasanothervirtualmachineconfiguredasasnifferhostcalledVM002.Whatconfigurationisrequired，andwhatotherchangeswillneedtobemade？（）VSM-PRI-188#shintvethernet5Vethernet5isupPortdescriptionisVM001，NetworkAdapter2HardwarE.Virtual，address：0050.56b0.001e（bia0050.56b0.001e）OwnerisVM"VM001"，adapterisNetworkAdapter2Activeonmodule5VMwareDVSport484Port-ProfileisVM-vlan-10PortmodeisaccessVSM-PRI-188#shintvethernet6Vethernet6isupPortdescriptionisVM002，NetworkAdapter1HardwarE.Virtual，address：0050.56b0.0020（bia0050.56b0.0020）OwnerisVM"VM002"，adapterisNetworkAdapter1Activeonmodule5VMwareDVSport485Port-ProfileisVM-vlan-10Portmodeisaccess

参考答案和解析
正确答案:A,C,D,F,H
更多“A virtual port ”相关问题

  • 第1题：

    What does the number one 1 represent for interface fe-0/0/1？（）

    • A、port number
    • B、PCI slot number
    • C、channel number
    • D、virtual PIC number

    正确答案:A

  • 第2题：

    Which connection type is available on a virtual switch?（）

    • A、service console port
    • B、ESX machine port group
    • C、virtual machine port group

    正确答案:A

  • 第3题：

    A customer is planning on having a single Virtual I/O Server (VIOS) configuration in a Power 750. They haveselected a 4-port 1Gb Integrated Virtual Ethernet (IVE). There will be no other network cards installed in the system. One IVE logical port will be used in the VIO Server and will be used as the physicalport in a Shared Ethernet Adapter (SEA). What is the maximum number of IVE logical ports available to use inother LPARs?（）

    • A、1
    • B、7
    • C、15
    • D、31

    正确答案:D

  • 第4题：

    A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server. Which limitation must be considered when planning the system configuration?（）

    • A、A VIO server requires a dedicated LHEA port.
    • B、There is a limit of 32 LPARs per virtual LAN.
    • C、Two VIO servers will be required. A single VIO server can only provide virtual storage or virtual Ethernet.
    • D、Two VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.

    正确答案:A

  • 第5题：

    A customer has a 4-core POWER6 570 with 4 partitions and a 2-port 1Gbps Integrated Virtual Ethernet (IVE) Adapter. They are having problems with throughput on the Ethernet adapter and want to improve performance.  Which of the following solutions will help the customer with this issue for the least cost and with the least interruption?（）

    • A、Order a 2-port 1Gbps Ethernet LAN adapter.
    • B、Order a 2-port 10Gbps Ethernet LAN adapter.
    • C、Upgrade the IVE adapter to a 4-port 1Gbps IVE adapter.
    • D、Upgrade the IVE adapter to a 2-port 10Gbps IVE adapter.

    正确答案:A

  • 第6题：

    Your network contains two Hyper-V hosts that run Windows Server 2012 R2. The Hyper-V hosts contains several virtual machines that run Windows Server 2012 R2. You install the Network Load Balancing feature on the virtual machines. You need to configure the virtual machines to support Network Load Balancing （NLB）. Which virtual machine settings should you configure？（）

    • A、Port mirroring
    • B、DHCP guard
    • C、Router guard
    • D、MAC address

    正确答案:D

  • 第7题：

    单选题
    An administrator has a Power 570 in default configuration with a 4 port 1 Gbps Integrated Virtual Ethernet （IVE） adapter. A new application requires that the MCS value for the first port group of the IVE adapter be set to 1.  If this change is made what is the maximum number of logical ports， across both port groups，  that the IVE adapter can provide？ （）
    A

     4

    B

     16

    C

     20

    D

     32


    正确答案： A
    解析： 暂无解析

  • 第8题：

    多选题
    You work as an administrator at ABC.com.The ABC.com network consists of a single domain named ABC.com.All servers in the ABC.com domain， including domain controllers， have Windows Server 2012 R2 installed.The ABC.com network has a server named ABC_SR09 that hosts two virtual machines.How would you enable Network Load Balancing （NLB） on the virtual machines？（）
    A

    You should configure Router Guard on the two virtual machines.

    B

    You should configure Port Mirroring on the two virtual machines.

    C

    You should add the Network Load Balancing feature on the two virtual machines.

    D

    You should configure Integration Services on ABC_SR09.

    E

    You should configure NIC Teaming on the two virtual machines.

    F

    You should enable spoofing of MAC Address on the two virtual machines.


    正确答案： B,D
    解析： 暂无解析

  • 第9题：

    多选题
    进行设备配置的user-interface的类型包括（）
    A

    控制台端口（Console port ） 

    B

    异步串行端口（Asynchronous Serial Port ）

    C

    辅助端口（AuxiliaryPort ） 

    D

    虚拟端口（Virtual user terminal interface ）


    正确答案： D,C
    解析： 暂无解析

  • 第10题：

    多选题
    As a network administrator, you are required to configure a switch port for a private Virtual LAN. In such a situation, which three of the following connection modes will be available during the configuration process? （）(Choose three.)
    A

    isolated mode

    B

    modular mode

    C

    community mode

    D

    promiscuous mode

    E

    non-isolated

    F

    permanent


    正确答案： D,A
    解析： 暂无解析

  • 第11题：

    多选题
    A customer would like to monitor traffic that is being sent to a specific virtual machine named VM001 using SPAN. The customer has another virtual machine configured as a sniffer host called VM002. What configuration is required， and what other changes will need to be made？ （） VSM-PRI-188# sh int vethernet 5  Vethernet5 is up  Port description is VM001， Network Adapter 2    HardwarE. Virtual， address： 0050.56b0.001e （bia 0050.56b0.001e）  Owner is VM "VM001"， adapter is Network Adapter 2  Active on module 5   VMware DVS port 484   Port-Profile is VM-vlan-10   Port mode is access        VSM-PRI-188# sh int vethernet 6   Vethernet6 is up  Port description is VM002， Network Adapter 1  HardwarE. Virtual， address： 0050.56b0.0020 （bia 0050.56b0.0020）  Owner is VM "VM002"， adapter is Network Adapter 1  Active on module 5   VMware DVS port 485   Port-Profile is VM-vlan-10   Port mode is access
    A

    Monitor session 1 type span       Source interface veth5 both      Destination interface veth6      No shut

    B

    monitor session 1      source vlan 10      destination interface veth6      no shut

    C

    monitor session 1 type er-span      source interface vlan 10      destination ip 10.1.1.10      no shut

    D

    VM002 must be removed from the Nk1V

    E

    Move VM002 to Module 5

    F

    Restart the VEM on module 5


    正确答案： F,B
    解析： 暂无解析

  • 第12题：

    单选题
    A customer needs to create a number of LPARs on a new POWER6 server with some LPARs requiring a dedicated network and other LPARs utilizing Virtual Ethernet via a VIO server. Which limitation must be considered when planning the system configuration？（）
    A

    A VIO server requires a dedicated LHEA port.

    B

    There is a limit of 32 LPARs per virtual LAN.

    C

    Two VIO servers will be required. A single VIO server can only provide virtual storage or Virtual Ethernet.

    D

    Two VIO servers will be required. One to provide virtual networking and another to provide dedicated networking.


    正确答案： D
    解析： 暂无解析

  • 第13题：

    As a network administrator, you are required to configure a switch port for a private Virtual LAN. In such a situation, which three of the following connection modes will be available during the configuration process? （）(Choose three.)

    • A、isolated mode
    • B、modular mode
    • C、community mode
    • D、promiscuous mode
    • E、non-isolated
    • F、permanent

    正确答案:A,C,D

  • 第14题：

    Which statement about SAN port channels configured on Cisco Nexus 5000 Series Switches is true？（）  

    • A、 A single SAN port channel can have both Fibre Channel and virtual Fibre Channel interfaces. 
    • B、 SAN port channels can include up to 16 interfaces.
    • C、 SAN port channels distribute traffic across all links in the port channel when source ID and destination ID load balancing are used.
    • D、 The links in SAN port channels can be connected to different sets of switches.
    • E、 The On mode of operation means ports only operate as part of a SAN port channel or remain inactive.

    正确答案:E

  • 第15题：

    When configuring a dual port gigabit Integrated Virtual Ethernet adapter (IVE), what value must be assigned to Multiple Core Scaling (MCS) to enable 8 logical ports in total? （）

    • A、2
    • B、4
    • C、8
    • D、16

    正确答案:A

  • 第16题：

    An administrator has a Power 570 in default configuration with a 4 port 1 Gbps Integrated Virtual Ethernet (IVE) adapter. A new application requires that the MCS value for the first port group of the IVE adapter be set to 1. If this change is made, what is the maximum number of logical ports, across both port groups, that the IVE adapter can provide?（）

    • A、 4 
    • B、 16 
    • C、 20 
    • D、 32

    正确答案:C

  • 第17题：

    In Windows Server 2012 R2 Hyper-V，which of the following options allows two virtual machines to simultaneously share the same physical RAM？（）

    • A、Integrated Services
    • B、Dynamic Memory
    • C、Resource Metering
    • D、Port Mirroring
    • E、Virtual Machine Chimney
    • F、Router guard

    正确答案:B

  • 第18题：

    Which of the following is a true statement when promiscuous mode is enabled on an Integrated Virtual Ethernet？（）

    • A、 The physical port can be used as part of a Shared Ethernet Adapter （SEA）.
    • B、 All physical ports on the Host Ethernet Adapter （HEA） default to promiscuous mode.
    • C、 Multiple logical ports can be assigned to a physical port if that logical port is in promiscuous mode.
    • D、 All physical ports that belong to the same port group will be set to promiscuous mode on the Host Ethernet Adapter （HEA）.

    正确答案:A

  • 第19题：

    单选题
    An administrator has a Power 570 in default configuration with a 4 port 1 Gbps Integrated Virtual Ethernet (IVE) adapter. A new application requires that the MCS value for the first port group of the IVE adapter be set to 1. If this change is made, what is the maximum number of logical ports, across both port groups, that the IVE adapter can provide?（）
    A

     4 

    B

     16 

    C

     20 

    D

     32


    正确答案： B
    解析： 暂无解析

  • 第20题：

    多选题
    A virtual port channel （vPC） allows links that are physically connected to two different Cisco Nexus devices to appear as a single port channel to a third device. Which are the mandatory steps for configuring vPC？ （）
    A

    Enable feature vPC

    B

    Define domains

    C

    Establish peer keepalive connectivity

    D

    Create a peer link

    E

    Configure the peer link as a trunk port

    F

    Create port channels and vPCs

    G

    Define port channel load-balancing method

    H

    Make sure configurations are consistent


    正确答案： F,D
    解析： 暂无解析

  • 第21题：

    单选题
    A customer is planning on having a single Virtual I/O Server (VIOS) configuration in a Power 750. They haveselected a 4-port 1Gb Integrated Virtual Ethernet (IVE). There will be no other network cards installed in the system. One IVE logical port will be used in the VIO Server and will be used as the physicalport in a Shared Ethernet Adapter (SEA). What is the maximum number of IVE logical ports available to use inother LPARs?（）
    A

    1

    B

    7

    C

    15

    D

    31


    正确答案： B
    解析： 暂无解析

  • 第22题：

    单选题
    Which connection type is available on a virtual switch?（）
    A

    service console port

    B

    ESX machine port group

    C

    virtual machine port group


    正确答案： A
    解析： 暂无解析

  • 第23题：

    单选题
    Which statement about SAN port channels configured on Cisco Nexus 5000 Series Switches is true？（）
    A

     A single SAN port channel can have both Fibre Channel and virtual Fibre Channel interfaces. 

    B

     SAN port channels can include up to 16 interfaces.

    C

     SAN port channels distribute traffic across all links in the port channel when source ID and destination ID load balancing are used.

    D

     The links in SAN port channels can be connected to different sets of switches.

    E

     The On mode of operation means ports only operate as part of a SAN port channel or remain inactive.


    正确答案： A
    解析： 暂无解析

相关内容